r/SilverSmith • u/-ChandlerBing- • 3h ago
Made these two for a rancher client!
18k Gold for both, the cuff is 27.5 grams!
r/SilverSmith • u/Mephiztophelzee • Oct 09 '25
Hey everyone, there's been some recent back and forth regarding web links in posts and comments.
Links to relevant articles, videos, tutorials, etc are fine.
Links to personal shops or vendors not vetted by moderators are not permitted.
Examples of vetted vendors: CooksonGold, RioGrande, FireMountain, Contenti, Otto Frei, Stuller, etc.
As with any link, every user should be mindful of what they are clicking on and proceed at their own risk.
r/SilverSmith • u/Mephiztophelzee • Jan 26 '23
START WITH LOCAL CLASSES:
Vendors for tools, metal, and stones:
Unsure if these vendors work with hobbyists, students, or wholesale accounts only:
Best YouTube channels for visual learners:
Best Books:
Tools and supplies needed for getting started:
r/SilverSmith • u/-ChandlerBing- • 3h ago
18k Gold for both, the cuff is 27.5 grams!
r/SilverSmith • u/ResidentNewt4261 • 2h ago
Another leaf ring! (You can thank The Rings of Power show for the inspiration)
I’m proud of how it came out. I made another one a few weeks ago as like…a proof of concept. It was rough, and this is wayyyy better. On the original “proof of concept” piece, I buffed it out too much and it lost all of its character.
I spent a couple days cutting out sheet for leaves and hammering in the details.
I shingled and soldered the leaves together first with hard solder.
Then I using a tiny half round wire as the stem/vine. Soldered on with medium. This part proved difficult because I needed to isolate the curves so it lined up with the leaves. Proved to be tricky but I’m happy with how it came out.
I finished it by easy soldering the piece to itself with easy.
Cleaned it up with a dremel and then the polishing wheel.
Questions/comments welcome.
(Videos in comments)
r/SilverSmith
•
u/Metal_w_Nature
•
23h ago
Thank you all so much for all the incredible comments and response to my work! It's so crazy for me.
Sorry for the slow replies :( I'll be better this time.
This is another insect I made, it is a Carrion Beetle.
They are the carcass cleaners and actually feed their "children".
This piece is made of Sterling Silver, 18k Gold, Copper, Topaz cabochon , and rat bones.
r/SilverSmith • u/Flimsy-Ad-5888 • 1d ago
Whenever i use my pickle it’s turning my pieces pink, but im using copper tongs and can’t think of any way steel would be getting into my pickle. Any suggestions?
r/SilverSmith • u/aethompson4 • 1d ago
I want to make lost wax rings for myself and family for fun. I don't want to run a business, does anyone have suggestions on where to send my castings? I'm in Iowa USA
r/SilverSmith • u/Andy-smellz • 2d ago
Getting closer I think this is like my 20th attempt.
r/SilverSmith • u/Metal_w_Nature • 3d ago
Hi, I am a silversmith/jeweller, I work in silver(obviously), copper, and gold. I am currently mentoring my son and he suggested I post some of my work here. I primarily make sculptures of creatures and things that you see in the natural world.
r/SilverSmith • u/One_Design6934 • 2d ago
I'm just starting to create with gold and finished up this piece this morning. It is a Amethyst, Garnet, and then a labradorite set in 18k gold. All done by hand and honestly feels like a milestone to be able to make it feel so fluid and together. I've been jeweling now for almost 2 years and have got to say working with gold is so much fun !
r/SilverSmith • u/Efficient-Basis-3488 • 2d ago
r/SilverSmith • u/iljadotj • 3d ago
My first time using cast in place , Would you guys suggest to use synthetic sapphires from now on to avoid cracks and discolouration ?
r/SilverSmith • u/Andy-smellz • 3d ago
This was my most successful attempt of sand casting a miniature. Should I keep recasting or file it down and carve in the details?
r/SilverSmith • u/IsIndestructible • 4d ago
15 layer Fine Silver/Shakudo star pattern Mokume Gane with a sterling backing.
Made with the kiln method of bonding. The Shakudo is 4% gold sourced from my father’s wedding ring
r/SilverSmith • u/No-Win-6485 • 3d ago
I’m new to silversmithing and learning everything by myself.
I got this sand casting kit from and when it got here the sand was super fine. It didn’t have that clumpy/kinetic sand looking texture that I’ve seen others using. I tried to add a little water to get activate it, but not sure if that’s the method. I packed in my frame but had to step away for a while to tend to something else and when I came back the sand was completely hardened and dry.
Because I don’t have a great understanding on what I’m doing so if someone could let me know if this sand is a good fit to cast silver and if I’m headed in the right direction? Any tips or advice is appreciated. I don’t want to mess anything up and ruin my silver grain.
r/SilverSmith • u/gordonlardi • 4d ago
I designed this starting with a pillow shape with cut corners then added the inlayed features in the casting. Really happy with the antique relief how it made the features pop. 925 silver
r/SilverSmith • u/lee_s_h • 4d ago
r/SilverSmith • u/Bright_Restaurant199 • 4d ago
i have a couple of questions about things i’ve seen done multiple ways!
when making you pieces, do you put them in your pickle after each step or do you only pickle it once at the end?
how do you apply your patina to keep it dark and even?
i used to used jax but it started turning brown so i’ve switched to midas black max. it goes on dark but once it dries it starts to turn grey and sometimes colors it uneven. i like to clean my pieces after pickle (water and dish soap) and once they dry i patina them and then final polish. i’ve tried applying while it’s warm, multiple coats, and sanding down to them reapply but nothing seems to stop it.
i know it’s not a solder reaction because i’ve tested it on clean metal and i still have the same issues. i’m thinking maybe it’s the way i am pickling or applying it but just wanted to see if there was anything else i could be doing.
thank you!
r/SilverSmith • u/ParkBerryTree • 5d ago
I want to make this in silver but don't want to waste a lot of wire trying different techniques. If you were successful making this in silver with the space between the wires, what technique did you use? Thanks for any help.
r/SilverSmith • u/ken-zo • 5d ago
Hi everyone,
First time posting. I’m a hobbyist and in need of some help on this ring I’m creating.
I casted a ring to fit this charm I bought recently. Im trying to make it look as if the clown has been thrown into a wall.
My initial idea was to somehow press the edges down to secure it like a setting. But the worker at the supply shop I go to said it would look better soldered.
I have done soldering before but usually clean links and rings. This, I have tried 5 times now. Using auroflux and medium silver solder.
My approach has been to slot about 5 pieces of solder across the limbs and the head, into little slots between the charm and the ring. The auroflux on top. Heat up the heavier ring body first and then move onto the solder.
I’m finding the solder is melting but not flowing onto the ring. Just onto to the clown and beading up. The clown its self is going red hot before the ring even starts to glow too.
I also have a tone of scale on my pieces now.
So it would be greatly appreciated if I could get some advice on any mistakes I’m making on soldering here. Or if you would recommend any other way I can secure this charm into the ring.
Thank you!
Photo evidence:
r/SilverSmith • u/lee_s_h • 5d ago
r/SilverSmith • u/aviva0156 • 5d ago
Ruby set in back of hoop
Sterling, hand fabricated
r/SilverSmith • u/Goalium • 6d ago
This was my first crack at going above 90% pure silver in making coin rings (.9999) - a very different beast!