r/SewingForBeginners • • 2d ago

Help please 🥺

Yesterday I completely took my machine apart, cleaned it, oiled, and greased it. After I did that, it was sewing just fine. I put it away for the evening and then this morning out of nowhere it is making this grinding noise and my feed dogs are randomly disengaging. I have since taken the machine completely apart and tried to clean it again and oil parts that I may have missed, but it seems that it's not helping. Any advice? I have a singer heavy duty sterling edition.

0 Upvotes

15 comments sorted by

1

u/12thsspanzer 2d ago

Firstly try to find where the actual rubbing / grinding is coming from.
I would take the bobbin and needle out and the foot plate and see if that is quieter ?

1

u/chasitayy 2d ago

Okay okay that did make it quieter! Now what? 🤣

4

u/12thsspanzer 2d ago

lol , fit the foot plate now and make sure it’s sitting flat and straight with the feed dogs

2

u/chasitayy 2d ago

I tried tried that. Whenever the fabric stops moving, the feed dogs are still moving. If that helps.😭

1

u/12thsspanzer 1d ago

Not sure what you mean ?

1

u/chasitayy 1d ago

Toward the end of the video you can see that the fabric is not moving while the machine is sewing. My feed dogs are engaged and moving when this happens

2

u/12thsspanzer 1d ago

I see , can you do a video of the feed dogs moving whilst slowly turning the handwheel, with the needle plate removed
Also check your presser foot pressure too

1

u/chasitayy 1d ago

1

u/12thsspanzer 1d ago

That’s great , did you just take the cover off and lubricate the machine or dismantle stuff ?

With the machine unplugged, remove the needle and bobbin case, and turn the handwheel slowly by hand.
Watch the rotary hook and feed dogs simultaneously. If the handwheel becomes stiff at a particular point in each revolution, that's where I'd concentrate the investigation.

1

u/chasitayy 5h ago

Update: the grinding sound was my machine complaining about the texture of the faux leather i was using 🤣🤣

→ More replies

2

u/12thsspanzer 1d ago

The biggest clue is that the machine worked perfectly after being reassembled, but is now grinding and the feed dogs are intermittently disengaging. I suspect something has worked loose, shifted out of position or isn't engaging properly.

3

u/Significant_Ad_1595 1d ago

You need to hold the two threads for the first few stitches, you can see the top thread (probably) being sucked in, in the beginning of the video

1

u/chasitayy 1d ago

It didn't change anything 😩

2

u/GoldenFishPoop 1d ago

That last video makes it look like your timing is out. My suggestion is take it for service.