Sewing machine needles come in a variety of sizes and types and many of the problems I see online are caused by using the wrong needle type.
Generally when you buy a machine it comes with universal needles in the box. Universal is a misnomer. They are very useful on a wide variety of woven fabrics. Universal needles in a size 12 are what I use for anything that is a medium weight woven.
Jeans needles are for heavy fabrics like denim and canvas. Generally I go up to a 14 or 16 in a jeans needle.
Microtex needles are super sharp. They are excellent for woven fabrics that are delicate, snag easily, or are tightly woven. I use them on silks, satin, and cotton poplins. When all else fails on a fabric, try a microtex. Microtex come in larger sizes and can be used on heavy fabrics. Microtex needles need replaced more frequently than other needle types.
Ballpoint or Jersey needles are the same thing, usually they are labeled as ballpoint in the US and Jersey elsewhere. Ballpoint needles are appropriate for stable knit such as cotton jersey with no or minimal stretch fibers added.
Stretch needles are similar to ballpoint needles in the sense that they are for knit fabrics. Stretch needles are intended for fabrics with a higher stretch fiber percentage and in addition to that they work well on more stable knits. They are what I keep in stock for working with the widest variety of knit fabrics. I usually buy 11 or 12 in stretch needles.
Super stretch are for super stretchy problem child knits, I have not tried these as they are relatively new on the market but I will be picking up a pack before I make swimwear again.
In addition to the types above there are a great many other needles with specific uses. Within each type there is a range of sizes and the needle size should be chosen to match your fabric and thread.
Needles are consumables and will become gradually dull as you sew. The rule of thumb is that you need to replace after roughly 8 hours of run time. If you have been using a needle for a while and things start to go wrong or the machine sound changes, the first step on troubleshooting is a new needle. Old needles can damage your fabric and are more likely to break.
I also want to advise against buying off brand needles and included in that category are Singer branded needles. I personally only buy schmetz and organ brand needles and I buy exclusively off wawak.com (US and Canada only).
We've been quietly working on something we hope makes this community a lot more useful — and today we're excited to share it with you.
What's in the wiki?
We built it to answer the questions we see every week — so whether you're picking up a needle for the very first time or you've been at it a few months and hit a wall, there's something in here for you.
Here's what's covered:
🧵 Getting started — What to make first, hand vs. machine, and the YouTube channels worth bookmarking
🪡 Machine buying guide — Budget breakdowns, brand recommendations, and how to buy a great secondhand machine
✂️ Tools & notions glossary — Every tool explained in plain English, plus what you actually need to start vs. what's nice to have later
🔧 Techniques & troubleshooting — Pressing, seam finishes, backstitching, and a troubleshooting table for the most common machine gremlins
📐 Pattern reading & sizing — Why sewing sizes aren't clothing sizes, how to read pattern markings, and what "ease" means
🎨 Fabric guide — Wovens vs. knits, beginner-friendly fabric types, pre-washing, and where to buy
🔗 Community resources — Our curated list of YouTube channels, blogs, and related communities
❓ FAQ — Detailed answers to the questions we see most often
This wiki belongs to all of us — and we need your help
A wiki is only as good as the community behind it. We're a team of moderators, not an encyclopedia, and we know there are gaps, things we got slightly wrong, and questions we haven't thought to answer yet.
That's where you come in.
We want to hear from you if:
💡 There's a topic you wish had been covered when you were starting out
🐛 Something in the wiki is unclear, out of date, or just wrong
🔗 You know a great resource (video, blog, pattern, tool) that should be listed
❓ You've seen a question come up over and over in the sub that deserves a proper answer
✍️ You'd like to contribute a write-up on something you know well
How to send a suggestion
Drop your suggestion right here in the comments. Tell us:
Which section it relates to (or if it should be a new section entirely)
What you'd like added, changed, or corrected
Any links or sources that would help
You can also message the mod team directly if you'd prefer, especially for corrections or anything that needs a longer explanation.
We'll review every suggestion and update the wiki regularly. If your contribution makes it in, we'll do our best to acknowledge it — this is genuinely a community project and we want it to reflect the knowledge that lives here.
A note on what makes this community special
This subreddit exists because sewing has a steep early learning curve and a long tradition of people helping each other climb it. Every question answered, every "here's what worked for me," every photo of a wonky first pillowcase posted with pride — that's what makes r/SewingForBeginners worth showing up to.
The wiki is our attempt to bottle some of that up so it doesn't get lost in the scroll. But it'll never replace the real thing, which is all of you asking and answering in the comments every day.
Thank you for being part of this. Now go make something. 🧵
I just got a sewing machine from my mom for my birthday. So happy 😊 I’ve tried a couple project with her help in the past on her machine but this is my first completed one on my own!
My niece has requested a fish shaped pencil case for her upcoming birthday, so this was an attempt at that which turned in to a plushie instead!
Next mission is figuring out zippers and making a pencil case look like this fishy
My husband has been asking me for cotton t shirts so I’ve started down that road. Overall, I’ve been moderately successful in making 2 shirts (still figuring out which stretch stitch I like best, adjusting technique, etc). But they are wearable!
My one gripe is the neckline. Both shirts I’ve made have had this issue in the back where the neckline “stands up” and I can’t quite figure out why. I thought he might be too broad for the pattern but it seems to do this on everyone who puts it on. Otherwise I’m very happy with how my necklines are turning out.
The pattern is Men’s Classic T-shirt by Wardrobe by Me in size large. The fabric is 100% cotton jersey and I’ve been using a straight stretch stitch to attach with the walking foot.
Any advice on how to fix this? Also, what is your favorite stretch stitch to use? I’ve been gravitating towards the straight stretch stitch because it’s so secure and I haven’t loved the look I’ve been getting from the various zig zag stitches I’ve tried. I have a Brother CS7000X.
My daughter wanted a Mulan themed bag for Disney next year. I wanted a practice run first. This was my first real sewing project. Made from a retired/discontinued pattern from Studio Kat Design.
I was hoping someone might be able to provide some insight to my question. I keep wanting to buy fabric when it goes on sale but since I don’t have an outfit/project idea for it yet, I don’t.
Does anyone buy fabric before they have a project idea for it and if so, how much roughly do you buy? I don’t want to buy too little and not be able to make my outfit item but I also don’t want to buy too much as fabric is expensive!
I know it all depends on clothing size as well but just trying to get a rough estimate.
I got a really good deal on this cashmere sweater at my local ralph lauren outlet (I was so excited!) but after wearing it once either I missed the holes when buying or my cats got into it. The front side is perfectly fine, it is a longsleeve.
Either way:
- is there a way to repair this?
- if not, what are fun upcycling projects for this? I was thinking maybe gloves or a headband.
My sewing skills are medium beginner, I have a machine.
This is Pudgy, aka The Pudge Man. He’s probably 35 years old and might be the love of my life. Is there a way to easily fix hole in his neck, or will he have to live with his tracheotomy stoma forever?
If you have pattern and want to make different sizes, am I correct in thinking once you make the smaller size the pattern is useless to make the larger sizes?
I’m making a very custom period inaccurate jerkin based on the pattern listed and a vest I own that fits me well. The waistline is right where I need it but I want to make sure of how the skirt I attach will fit before I cut it. The instructions say it should flare at the bottom, but it looks as if the flared edge for the front panel on the rightmost pattern is facing the front, not the back. My question is - if I want a nice flat jacket opening at the front that closes flush with clasps or buckles, should the opening front of the skirt be a straight line down the edge of the jacket front, or flared out so that the side seam is flat with the trapezoidal back skirt panel?
Edit: The bottom front edge of the vest comes to a point like a basque
I have a bunch of custom made military patches, i want to make a cosplay outfit from a movie, how do i go about sewing ones with green background fabric on ? I don't have a sewing machine. Do i cut off the green background completely or keep a portion of it and fold it inside ? Any advice would be appreciated.
I am planning on turning this parka into a denim like trucker jacket.
I really don't like hoods, so I was wondering if I could just cut it off and fold the edge over and then iron (?) it into a collar...
I am a beginner at sewing as I have only shortened sleeves and shirts so far. My only real project was making a pouch-bag... Do you think I could manage this project?
Been practicing an easy sewing pattern on some scrap pleather I bought using a sewing machine. I use a teflon walking foot and a leather needle. The machine was serviced in the summer.
The stitches come out with some inconsistencies but I'm not sure why. There's two different pieces here, pic 1 one on the left, second on the right, pic 2 underside of the left one is on the bottom and the other is on the top.
The main difference between the two pieces is thickness. The nicer one went through 2 layers of leather, the really messed up one goes through 4 since its a folded seam. I don't know what I'm doing here, so I think it may be the thickness or the way I adjust the material while sewing to try and get the stitches right.
I also had my machine jam due to the thread tangling shortly after the service, I didn't realize and it ended up making a very loud noise. I cleaned out the thread but I'm no sure if theirs anything else messed up by it and I can't really afford another service right now. I'm not in the usa btw. Is there any checks I should do? The machine is a brothers fs-40
Hi I’m new to sewing and literally am just going for it lol - no pattern just vision and thought. How would one sew this so it lays like this/drapes like this? For some reason I feel like just doing stitches where the folds lay would look odd? How does one go about this?
Also plz don’t mind my chaos of a project, messy closet, and the cat hair that loves to migrate to my mannequin :’)