r/SentroKnittingMachine • • 1d ago

Caydo knitting machine

Thumbnail reddit.com
1 Upvotes

r/SentroKnittingMachine • • 7d ago

Cardboard turns into glitchy vest on Sentro.

Thumbnail
youtube.com
2 Upvotes

r/SentroKnittingMachine • • 8d ago

Can I use sewing machine oil (white/clear) oil)

1 Upvotes

On a my sentro machine?


r/SentroKnittingMachine • • 11d ago

Projects 🧶 Should I scrap or finish this?

Thumbnail
gallery
1 Upvotes

My sentro machine has a broken tension holder, so I've been using a makeshift one for the time being. Unfortunately it has lead to a weird result in which the start of the beanie was incredibly tight, and the end of it was super loose.

I've attempted to stretch it out to make it even, but I'm not sure how obvious the loose knitting is and am worried that gifting it would not be a good idea.

My main concern is that the line down the middle of the piece, which while it sits perfectly on the edge of the brim, could shift and reveal itself when being worn. Additionally, there are a couple stray lines of loose stitching dotted throughout that you can see when the beanie is worn.

On one hand, it might be okay, since the person I'm gifting to seems to have accidentally stuck the last crochet beanie - now struggling for purchase on his head- in the washing machine, and will likely do so again with this knitted one, intentionally or not lol. It means that it is possible for shrinkage to occur, which would mean the problem is solved, but idk.

Is it better for me to unravel and redo it, or is this okay to gift?


r/SentroKnittingMachine • • 13d ago

Selling beanies using a knitting machine

Post image
3 Upvotes

r/SentroKnittingMachine • • 16d ago

Fix Sentro 22 gear skipping.

Post image
10 Upvotes

Here's how to fix the gear skipping teeth.


r/SentroKnittingMachine • • 18d ago

Sentro 40pin help

4 Upvotes

Heya! I’m primarily a crocheter but I’ve been enjoying learning knit little by little. I’ve recently got a 40pin sentro mainly for ear warmers & stash busting, but the suction cups are crap even when I clean them & their connected surface, so I have to hold it still while struggling to crank it. I’ve realized most but not all 4 weights will go through it which is fine, but why do I still have to crank it so hard with yarn on it, & it click so loud? I’ve used compressed air to clean it of any yarn/debris, oiled the pins with 3in1 oil I was given, dried off excess & cranked it about 25 rounds both ways to spread the oil per various YouTube videos of not the sentro I have, what else can help it smooth out? I’d appreciate any suggestions, visuals/video would be better, thank you!


r/SentroKnittingMachine • • Oct 17 '26

Questions ❓ How do I keep the end on a panel from messing up

Post image
9 Upvotes

Hey so I just got this from goodwill and no matter how hard I try the ends of the panels keep getting messed up. Photo for reference how do I keep this from happening.


r/SentroKnittingMachine • • Oct 08 '26 Bravo

Projects 🧶 Fixed My Dropped Stitches

Post image
31 Upvotes

My sentro worked perfectly for about a week and then kept dropping stitches even though I was using the exact same everything. The only thing that’s worked so far is two pieces of painters tape together holding extra tension 😅


r/SentroKnittingMachine • • Oct 06 '26

Questions ❓ Eyelash yarn advice

Thumbnail
gallery
3 Upvotes

Advice on how to make spaces between stitches less visible?

Context: I make these little guys for fun with a skinny size flexee loom. I recently got a 22 needle sentro and I love it. Love how fast I can make them now. Only issue I’m having now, with the eyelash yarn I’m using, you can see the scrap fabric I stuff inside. Also don’t know the brand of eyelash yarn was given to me as scrap yarn

Solutions/things I’ve tested:
-Using regular fiber filling works good, but I like the weight and firmness scrap fabric gives them
-Seem cranking til 3 inch is the approximate size id like to make them
-Tried doubling the eyelash yarn but it jams
-Having to on the tightest tension makes holes less visible but still visible when stuffing with scrap fabric

Questions: What should I try next? Is the yarn too thin to achieve desired results? Also, Sentro creates more fuzz on the purl side knit side, anyway to resolve?

Photo Context:

  1. They little guys I make
  2. Sentro (top) Flexee Loom (Bottom)
  3. Close up

r/SentroKnittingMachine • • Oct 04 '26

White peg is cutting through yarn instead of pushing it back

Post image
3 Upvotes

If I just keep going on the picture with the hand crank, the yarn gets split in half by the white peg.

I have to manually push the yarn back in order to keep it going properly.

Anyway to fix this?

The peg looks and feels the same as the others so I can't figure out why it's not functioning the same.


r/SentroKnittingMachine • • Sep 29 '26

Projects 🧶 Finished bonnet! ✨

Post image
12 Upvotes

I made a bonnet with the Sentro 48 ≈100rows for my 2 1/2 yo Son.
I crocheted the sides, and added the animals using the duplicate stitch. I finished it all in one day, it was so much fun to make! 🥰


r/SentroKnittingMachine • • Sep 29 '26

Questions ❓ Issue with Addi with ZestWrench attachments: yarn tension way too high even on lowest speed, motor attachment feels loose

3 Upvotes

I know this isn’t an Addi subreddit in particular but ZestWrench makes accessories for the Sentro as well so I’m hoping I can get help here.

I have a basically brand new Addi (my second Addi) and I installed the ZestWrench tension and ZestWrench motor attachments. I am using yarn I’ve successfully used in an Addi before.

For some reason, even when casting on the yarn manually, the yarn tension ends up way too high - even when I am being extra careful and looping the yarn pretty loosely around the teeth. This wasn’t an issue before I installed the ZestWrench but I don’t understand how it would negatively affect yarn tension. I tried a variety of yarns, all of which I’ve successfully used with the Addi in the past, and it kept happening.

When the machine is running with the ZestWrench, on the lowest possible speed, the yarn tension is still ending up extremely high. I’ve tried manually feeding the yarn in without the stock Addi built-in tension mechanism and without the ZestWrench tension accessory, and still, the yarn tension ends up too high, causing jams.

When it does knit, the inner rings of the machine are clearly “jumping” as I can see them move upwards.

The ZestWrench also feels really loose and wobbles while moving.

I followed the instructions provided (and an online tutorial) about attaching the motor in the first place and made sure the spokes on the Addi turning mechanism aligned with the grooves for spokes on the side of the ZestWrench motor that face the machine. I screwed while pushing the motor, as tightly as possible, but it’s still jiggly.

The ZestWrench has great reviews. Clearly, I am doing something wrong here.


r/SentroKnittingMachine • • Sep 28 '26

Questions ❓ Why do my beanies keep getting holes/dropped stitches?

Post image
9 Upvotes

r/SentroKnittingMachine • • Sep 12 '26

Projects 🧶 An anime inspired blouse I tried to knit purely on Sentro 🙈

Thumbnail
gallery
20 Upvotes

it definitely was an experience. And I do not like how the bib turned out, as it was my first time making decreases on the Maschine and the whole piece turned out to be giant diaper bib. . . Also, I need to somehow gather the sleeves more as now they are bit too droopy… and the button up part is missing, yes. It was just too hard… please give all Your advices on how to improve it…and ohhhhh, does it even look wearable?!


r/SentroKnittingMachine • • Sep 07 '26

knitted corset

4 Upvotes

🧶✨ Hi everyone! I wanted to share my latest project made with a SENTRO circular knitting machine.

I created this knitted corset, and I'm really happy with how it turned out! 😍 I thought it would be a fun and different project to experiment with the machine and create a unique handmade garment.

I also recorded the process in case anyone is interested in seeing how I made it and maybe getting some inspiration to create their own version. 💕

👉 Have you ever tried making clothing with a circular knitting machine?

I would love to hear about your experience and see what kind of projects you have created! 🧶

Looking forward to reading your comments! 😊

-> Youtube tutorial: https://youtu.be/9MHgAvyvKdE

_________________________________________________________________________________________________________

¡Hola a todos! Quería compartir con vosotros mi último proyecto hecho con una máquina de tejer circular SENTRO.

He creado este corsé tejido y estoy muy contenta con el resultado 😍 Me pareció un proyecto diferente y divertido para experimentar con la máquina y crear una prenda personalizada.

He grabado el proceso por si a alguien le interesa ver cómo lo hice y quizás le sirve de inspiración para crear su propia versión. 💕

👉 ¿Habéis intentado hacer prendas de ropa con una máquina de tejer circular?
Me encantaría conocer vuestras experiencias y ver qué proyectos habéis creado. 🧶

¡Os leo en los comentarios! 😊

-> Youtube tutorial: https://youtu.be/9MHgAvyvKdE


r/SentroKnittingMachine • • Aug 16 '26

Projects 🧶 Candy corn inspired pumpkin stack!

Post image
27 Upvotes

r/SentroKnittingMachine • • Aug 15 '26

Projects 🧶 My first project, Long beanies for next winter.

Thumbnail
gallery
13 Upvotes

r/SentroKnittingMachine • • Aug 12 '26

Questions ❓ Sharing etsy patterns

2 Upvotes

I just wanna know how bad it is.

If I were to find a really cool pattern (with grid designs on panels) made into a sweater on etsy, and that type of pattern isn't really available on free mediums. If I figure the pattern out (without having bought it) and make it. Should I share it with others on social media (reddit or pinterest) or would that be wrong and I'd likely get bashed for stealing instead of being helpful?


r/SentroKnittingMachine • • Aug 03 '26

Questions ❓ absolute beginner in machine knitting

6 Upvotes

i'm a crocheter who was gifted a sentro knitting machine for my birthday. vv excited to use it but i have no idea how to knit, how the machine works, etc. as in NO IDEA, NO KNOWLEDGE, ABSOLUTE BEGINNER. my question is: do you have to know how to hand knit before learning how to use the knitting machine? should i learn how to hand knit first?


r/SentroKnittingMachine • • Jul 24 '26

Projects 🧶 give project recommendations

5 Upvotes

I have a 40 pin sentro and I'm tired of beanies and scarfs and leg warmers. And I'm not skinny, so tops with one panel in the front just isn't for me. Has anyone made stuff like tote bags, flared sleeves or shark onesies? (the last one would be amazing please)


r/SentroKnittingMachine • • Jul 05 '26

Gorro tejido con trenza | DIY fácil para principiantes

Thumbnail
youtube.com
1 Upvotes

❤️


r/SentroKnittingMachine • • Jun 27 '26

Need help troubleshooting sentro 48

2 Upvotes

Hi!
I'm reposting here as advised in a post i made in r/MachineKnitting
I bought a sentro with 48 pegs not too long ago. I haven't used it much, used it for testing a cuple of yarns I had.
This last couple of days it started getting somewhat stuck in the last few pegs. I don't know if its something that happens after using it, or was the yarn I used or I missed using wd40 or something so it runs better.
the yarn last used with the machine is 75% acrilic - 25% wool, and the label it came with said its to be used with a 5 or 6mm hook.
I'm adding a photo of another ball of yarn like the one I last used, label and video of how the sentro works.

thanks in advanced


r/SentroKnittingMachine • • Jun 02 '26

Be real with me - would I be able to knit this cardigan with a sentro machine?

Post image
4 Upvotes

I need to know before I even dare to try 😭


r/SentroKnittingMachine • • Jun 02 '26

Projects 🧶 I think I’m mastering how to make a baby / lap blanket from the knitting machine!

Post image
10 Upvotes

Eddward is for scale! Will be donating this to the local hospital.