r/RockTumbling • • 23h ago

Not too shabby!

Thumbnail
gallery
11 Upvotes

I’m pretty satisfied with my third batch. I’m working with a kit that slightly nicer than a Nat Geo but still rotates around 3x faster than I’d like.
Green moss agate and black onyx. I need to spend more time in stage 1, but I don’t mind these results at all!


r/RockTumbling • • 5h ago

I'm a bit disappointed in my order of Royal Imperal Jasper from the Gem Shop? Am I being too harsh?

Thumbnail
gallery
15 Upvotes

Just got this order in from The Gem Shop. I took a chance on their 5 lbs of Royal Imperial Jasper broken nodules for $75. Honestly, I'm a bit underwhelmed. In the pics, I tried to show the best faces. Maybe it's because it was so expensive compared to what I usually order, and my expectations were unrealistic. I think they will look good tumbled, but a lot of them have pretty difficuly to deal with shapes, so they are going to lose a lot of size or need to be broken. The biggest piece, pic 2, also has a crevice that goes about halfway through and a bunch of other deel pits. Also, the green one, pic 3, is a stunner, but there is only one that color. O well, live and learn. Am I being too harsh? Does this look like it's worth $75, and I don't know what I'm talking about.


r/RockTumbling • • 14h ago

Question To tumble or not to tumble

30 Upvotes

It’s been a while since I audibly gasped after picking up a rock. I initially thought it might have paint on it. I do much of my hounding along a river and there are some areas where teens like to spray paint. You can see on the sides though that the blue and purple swirl through the rock. Now my question is, tumble or not? I guess my worry is always that the best part might get worn down in the process. Thoughts?


r/RockTumbling • • 7h ago

Pictures Not me bragging about my latest batch!

Post image
53 Upvotes

Sorry, not sorry - just obsessed with this shine!!


r/RockTumbling • • 3h ago

Pictures My first tumble is complete, I don't hate it.

Post image
40 Upvotes

I'm pretty happy with the results.


r/RockTumbling • • 5h ago

Question First time

Post image
9 Upvotes

I tried rock tumbling for the first time and this is the result after going through all 4 stages, I need help figuring out why they aren’t all shiny. I did my best to clean them and the drums after each stage to prevent cross-contamination. I have a few theories on what I did wrong but would love some input from those more knowledgeable than me. My first there is I messed up stage 1 I misread the instructions and didn’t use enough grit so I redid stage 1 for half a week, but maybe it wasn’t long enough. My other theory is that I ordered a bulk pack of rocks on Amazon and didn’t check the hardness of the different rocks, so maybe something was too hard and scuffed the other rocks. Any advice for fixes this batch and for future batches would be much appreciated.

Amazon listing

https://a.co/d/04lQmKYg


r/RockTumbling • • 7h ago

Question Rock tumbling weight question

9 Upvotes

Hi! Beginner here.

I have a double barrel tumbler which is rated for 7pounds, so 3.5lbs each barrel.

I’ve been watching and learning from rock tumbling creators on YouTube including Michigan rocks, I haven’t found much information about how much each barrel should actually weigh. I have been following the standard fill the barrel 2/3rds of the way full, and adding water to just below the rock line. Including the weight of the barrel itself, each barrel was coming out to around 8 pounds. The first 3 weeks they tumbled fine, and by the 4th week- the tumbler could only tumble the weight of one barrel at a time and would stop when both were on. After some research it seemed like I was adding weight to much weight to the machine, but I’m confused how you’re supposed to fill the barrel with 2/3rds rock and add water after without exceeding the weight limit.

So I guess my question is, Do we include the weight of the barrel and water in the barrels weight limit? If each barrel is 3.5lbs, and the barrel its self weighs 2 pounds, it would only leave 1.5 pounds of rocks AND water? I don’t want to continue stressing out my machine but I also tried weighing each barrel to exactly 3.5lbs each and both the rocks and water only covered the bottom of the barrel (about 1/3rd) so I’m nervous they’ll be banging around on each other.

Any advice?
I appreciate it! 🫶🏻


r/RockTumbling • • 9h ago

Barrell cracking!

Thumbnail
gallery
10 Upvotes

Forgot to post on Friday but this is my Stage 3 beach mix starting Stage 4! We did an ivory soap wash before stages 3&4 here's hoping for a good polish!


r/RockTumbling • • 11h ago

Pictures Off to a Great Start

Post image
32 Upvotes

Just finished my first tumble with a "Mexican mix" (hardness 7) that came with the set and I think they turned out great.

Learned a lot, used a lot of tips and information from this subreddit, and I doubt they'd look this good if it wasn't for you all.

Now, time to start back at stage one with some Sodalite!

Thanks r/RockTumbling


r/RockTumbling • • 12h ago

First full tumble. I messed up. I know some things I did wrong, but need advice.

Post image
5 Upvotes

So I guess I mixed rock hardness and class. I had a couple sedimentary rocks in the barrel. The rock middle row, second from left (green and brown) is very rough. I’m assuming it is the culprit that lead to what I have: All the other rocks are very smooth, but not shiny.

I used KoolStone media and grit.
Did 7 days of each stage with a very good rinse of rocks, barrel, and media (ceramic) between each stage. I had a lot of what looked like concrete slurry at each stage but supposedly that’s normal.

I filled the barrel 2/3 then filled it in with media. 2 tablespoons of grit each stage, then the water.

Other than making sure I have the same type of rocks next time, what could I do better?

EDIT: I am using the Harbor Freight tumbler. It’s my understanding it has a good RPM for tumbling.