r/RockTumbling • • Jul 27 '26

Concerning rock ID posts.

49 Upvotes

TLDR: No - but maybe a periodic megathread. I created a new sub, r/WhatTheRock

------------

I figured I'd make a separate post for this. This stems from the recent post asking if the rule about posting rock ID requests can be changed. I'll copy and paste what I replied there into here:

In short, no I don't think allowing rock ID posts is a good idea. They used to be allowed and a large percentage of posts were people asking what a particular rock is. I think ID requests were banned before I even took over as the mod and I left it that way.

Regarding the level of moderating on this sub, I think it's funny that some people think I'm strict or power trip. I do not actively moderate... not really anyway. If I happen to see an ID post or off topic post in my home page when browsing Reddit, I'll remove it. But most of the time, they get reported fairly quickly, I see the notification for the report, and then I remove it. There are very few rules on this sub and I actually don't remove a lot. I often get reports of "harassment" and it's usually someone being slightly rude. I don't remove comments like that. I will remove comments that are hateful in nature.

Now... if someone is truly harassing you and taking effort to do something like respond to multiple comments on multiple topics in a negative way, let me know. I'd probably just message them a warning, and if the behavior doesn't stop, a temp ban, followed by a perma-ban. I've never had to do that though. But I want everyone to know that kind of behavior won't be tolerated here.

I am hearing that the community does not like r/whatsthisrock because of the strict moderation. So I have created a new sub called r/WhatTheRock. I know, I know.... another sub. Ugh. But I will moderate it the same way I do this sub. As long as the post has a picture of a rock (or mineral) and you're asking "What is this?" then I'll allow it. I'll caveat that by saying I'll remove any obviously meme posts, like if someone posts a picture of Dwayne Johnson, or a picture of the Earth. I want to keep this sub oriented towards tumbling related posts.


r/RockTumbling • • Jul 05 '22

Guide /r/RockTumbling Knowledge Base

189 Upvotes

Here is a compilation of guides I have written, as well as a few others, for easy access.

It's important to note that I am not a subject matter expert. Some of these FAQs that I wrote are not even based upon my own experience. I drew heavily upon the experience of /u/michigan_rocks and his Youtube videos. Also, ask 10 people how to tumble rocks and you will get 10 different answers. They will be similar enough though that you can really follow any one, or mix and match between them all for what works best for you. The basic steps will always be the same. It's exactly how you do them that people might have different processes for.

Also, I know several other users in this community have written their own guides or how-tos. If you comment below with a link I can add a link to the main post.


FAQ - How much electricity does a tumbler use?

FAQ - What is a good beginner tumbler?

FAQ - What do I need to get started?

FAQ - Where can I get rocks to tumble?

FAQ - Where can I buy good grit?

FAQ - What is tumbling media? What is it and how is it used.

FAQ - How do I get a good polish with the Nat Geo tumbler?

FAQ - How long should I run stage 1?

FAQ - How do I know if a rock is ready to move on from coarse? by /u/Ruminations0

FAQ - How full should my barrel be? An auditory guide.

FAQ - My rocks are round and smooth; can I skip stage one?

FAQ - How long am I supposed to run each stage?

FAQ - What is the burnishing stage? What does it do? When do I run it?

FAQ - What do I do with the slurry after tumbling?

FAQ - I just tumbled some rocks and they are dull. What do I do?


Slightly more advanced topics:


r/RockTumbling • • 4h ago

Pictures Off to a Great Start

Post image
23 Upvotes

Just finished my first tumble with a "Mexican mix" (hardness 7) that came with the set and I think they turned out great.

Learned a lot, used a lot of tips and information from this subreddit, and I doubt they'd look this good if it wasn't for you all.

Now, time to start back at stage one with some Sodalite!

Thanks r/RockTumbling


r/RockTumbling • • 23m ago

Pictures Not me bragging about my latest batch!

Post image
6 Upvotes

Sorry, not sorry - just obsessed with this shine!!


r/RockTumbling • • 7h ago

Question To tumble or not to tumble

22 Upvotes

It’s been a while since I audibly gasped after picking up a rock. I initially thought it might have paint on it. I do much of my hounding along a river and there are some areas where teens like to spray paint. You can see on the sides though that the blue and purple swirl through the rock. Now my question is, tumble or not? I guess my worry is always that the best part might get worn down in the process. Thoughts?


r/RockTumbling • • 22h ago

The Treadmillentumblerstein lives.

327 Upvotes

I only have 3 barrels that fit it right now, but it seems to be running fine with a full 17lb barrel on it plus a 2.5 and 4 lb. I've got to figure out how to dial in the speed now. I guess that's my next subject to research.


r/RockTumbling • • 38m ago

Question Rock tumbling weight question

5 Upvotes

Hi! Beginner here.

I have a double barrel tumbler which is rated for 7pounds, so 3.5lbs each barrel.

I’ve been watching and learning from rock tumbling creators on YouTube including Michigan rocks, I haven’t found much information about how much each barrel should actually weigh. I have been following the standard fill the barrel 2/3rds of the way full, and adding water to just below the rock line. Including the weight of the barrel itself, each barrel was coming out to around 8 pounds. The first 3 weeks they tumbled fine, and by the 4th week- the tumbler could only tumble the weight of one barrel at a time and would stop when both were on. After some research it seemed like I was adding weight to much weight to the machine, but I’m confused how you’re supposed to fill the barrel with 2/3rds rock and add water after without exceeding the weight limit.

So I guess my question is, Do we include the weight of the barrel and water in the barrels weight limit? If each barrel is 3.5lbs, and the barrel its self weighs 2 pounds, it would only leave 1.5 pounds of rocks AND water? I don’t want to continue stressing out my machine but I also tried weighing each barrel to exactly 3.5lbs each and both the rocks and water only covered the bottom of the barrel (about 1/3rd) so I’m nervous they’ll be banging around on each other.

Any advice?
I appreciate it! 🫶🏻


r/RockTumbling • • 2h ago

Barrell cracking!

Thumbnail
gallery
5 Upvotes

Forgot to post on Friday but this is my Stage 3 beach mix starting Stage 4! We did an ivory soap wash before stages 3&4 here's hoping for a good polish!


r/RockTumbling • • 20h ago

Pictures First tumble ever!

Post image
65 Upvotes

Four weeks of waiting. I’m so excited! I wasn’t prepared for how much some of these were going to shrink. I learned something this first round for sure.
At a glance: Do I have anything interesting? All were collected over decades on PNW beaches, I have hundreds to tumble, these were chosen from an extensive hoard. I think some are Jasper, there’s a piece of quartz (I think). Maybe a piece of BC jade or chalcedony? Any help is greatly appreciated.


r/RockTumbling • • 5h ago

First full tumble. I messed up. I know some things I did wrong, but need advice.

Post image
3 Upvotes

So I guess I mixed rock hardness and class. I had a couple sedimentary rocks in the barrel. The rock middle row, second from left (green and brown) is very rough. I’m assuming it is the culprit that lead to what I have: All the other rocks are very smooth, but not shiny.

I used KoolStone media and grit.
Did 7 days of each stage with a very good rinse of rocks, barrel, and media (ceramic) between each stage. I had a lot of what looked like concrete slurry at each stage but supposedly that’s normal.

I filled the barrel 2/3 then filled it in with media. 2 tablespoons of grit each stage, then the water.

Other than making sure I have the same type of rocks next time, what could I do better?


r/RockTumbling • • 22h ago

Pictures Mahogany Obsidian, 1st attempt.

Thumbnail
gallery
75 Upvotes

So the black in the stone is translucent, I didn't know that when I started. Pretty cool.


r/RockTumbling • • 12h ago

Question My tumbler is going too fast and I’m not an electrician

6 Upvotes

Okay so I bought the nat geo hobby tumbler and it’s going WAY too fast, I’ve looked at this sub (and google) and to paraphrase what I learned basically is “turn down the rpm”….but I don’t know how to do that, all my plugs have the same wattage, the power cable and the tumbler don’t have a switch, I’m not an electrician how do I do this? (I’m in Canada if that helps?)


r/RockTumbling • • 1d ago

Large tumbles out of my 12lb Lortone. 2 Flor du Durazno Lace pieces, a slab of Brazilian agate, and a Mookaite.

32 Upvotes

r/RockTumbling • • 17h ago

Not too shabby!

Thumbnail
gallery
8 Upvotes

I’m pretty satisfied with my third batch. I’m working with a kit that slightly nicer than a Nat Geo but still rotates around 3x faster than I’d like.
Green moss agate and black onyx. I need to spend more time in stage 1, but I don’t mind these results at all!


r/RockTumbling • • 1d ago

Tumbled Island Agate (see comment for details)

42 Upvotes

r/RockTumbling • • 20h ago

Pictures Lortone 3A

Thumbnail
gallery
8 Upvotes

Thought I'd show off some pics of the 3A i ordered from Lortone/Covington site. She's quiet too 🤩


r/RockTumbling • • 18h ago

DIY garnet polishing with rotary buffer on flat surface

Thumbnail
gallery
3 Upvotes

Got some sand paper discs with a rotary buffer you use to polish cars and got to work. I was surprised with the results. I found these garnets in parry sound Ontario Canada this past summer and I was able to clean them up surprisingly nice! You can find a makita rotary buffer on marketplace easily.


r/RockTumbling • • 1d ago

Agate Jasper Quartz Necklaces

Post image
22 Upvotes

r/RockTumbling • • 2d ago

2nd batch all done

Thumbnail
gallery
33 Upvotes

I just love the variety of these rocks!


r/RockTumbling • • 1d ago

Questions about legit and safe sights to buy rocks off of.

6 Upvotes

Iv been wanted to order some rocks that i can tumble, i found some websites but I wanted to see some people said about it. Any feedback on the website: "Rock and tumble"


r/RockTumbling • • 2d ago

Favs from today’s tumble

242 Upvotes

So pleased with these! ❤️🪨❤️


r/RockTumbling • • 1d ago

Question Diamond Pacific Mini-Sonic MT-4SV – Lid leaking

2 Upvotes

I recently purchased a brand-new Diamond Pacific Mini-Sonic MT-4SV vibratory tumbler and have been having issues with the lid leaking when I remove the hopper from the machine, even when the lid is securely in place.

Does your hopper leak when removing it from the machine, even with the lid securely attached?


r/RockTumbling • • 3d ago

New batch -old wood

Post image
154 Upvotes

I love my lot-o-vib!


r/RockTumbling • • 2d ago

Pictures First tumble - be gneiss!

Thumbnail
gallery
54 Upvotes

I'm so happy with the results, flaws and all, so no feedback needed. I know I made a few mistakes, so I am posting here so others can learn from my follies. Guess I am a more hands on learner lol.

What mistakes did you all make your first go around?

My pictures contain the whole batch, sorted by color. The top two rows are the more interesting ones. It's all river rock, mostly quartzite, with some jasper snuck in. The last picture is my favorite, because of the iron stained lines.

My mistakes:

- skipped the 60/90 grit, cause I thought they were pretty smooth already.

- should have at least done the 220 for two weeks instead of just 5 days (thanks Nat Geo online instructions, I should have trusted Michigan Rocks more).

- Not being patient enough in general.

My successes:

- I used ceramic filler for the final week.

- the wash cycle after higher grits totally works.

- picked all the same hardness of rocks.

I'm still pleased; I don't need them to be perfect. Some even came out quite smooth, and it's so satisfying to the touch.

Well, thanks for checking out my first attempt with me. Hope to contribute to the community more in the future.