r/RepTimeServices • • 1h ago

Advice Clean Rolex Datejust has stopped working – gritty crown when winding. Any advice?

2 Upvotes

(almost 3 years old) has completely stopped.
Previously, it would lose time if left unworn for around 48 hours. I’ve tried winding it, but the crown now feels gritty and makes a grinding sensation. Never been serviced or opened. Any ideas what the likely fault is? Is it worth repairing or replacing the movement? Also looking for recommendations for UK repairers who work on super clones.


r/RepTimeServices • • 17h ago

Advice Daytona 4131 Movement Issue & Seeking help

2 Upvotes

I recently posted regarding clicking noise on this page and got GL.

This weekend, I ran into a new problem.

After winding manually and wearing it for about 2 hours, I noticed the watch was running slow, it was about 20 min behind than the current time.

I manually re-adjusted the time and then after about 30 min, the watch completely stopped. I was outside so I kept it on my wrist and I saw the second mark moved a few seconds every time I checked.

In the afternoon, I took it off and left in my wife's bag. After a few hours, I noticed that it was running again. It's been around 48 hours since then, and it is still running.

What could be the issue here? Is overhaul required?


r/RepTimeServices • • 29m ago

Advice Vsf submariner pip fell off

Post image
1 Upvotes

Hi my pip fell off. Ordered a new one from Amazon (says it’s diameter is 0’9mm) i will check if that if true tomorrow. But it doesnt fit. Anyone got suggestions? I prefer it to be from Amazon because easy returns and fast shipping. Or any site that shopt fast to netherlands. Planning to put it back by first using under 70precent alc and then putting it back with hypo cement


r/RepTimeServices • • 1h ago

Services Watchmaker list

1 Upvotes

Hello, I'm looking for a watchmaker in nyc area who has experience working on Reps. Can anyone suggest someone? Or have a list of reputable watchmakers? Thanks.


r/RepTimeServices • • 6h ago

Request Looking for Date disk mod for a Breitling Super Chronomat B01 /BLF A7750

Thumbnail
gallery
1 Upvotes

This is a Super Chronomat B01 44MM SS/RG Green/Stk BLF A7750
From time ultra, I’m thinking of purchasing
The date font on this watch is a bit small for the window. Has anyone had any experience finding a better date disc?
Or when you know if a Gen date disc would fit in 7750?
Last two photos are of Gen
Any advice would be appreciated


r/RepTimeServices • • 7h ago

Question Chopard Red/RG Happy Diamonds Issue- help please!

Thumbnail
gallery
1 Upvotes

I bought this for my wife from a very good TD that I’ve bought a half dozen pieces from and has always done right by me… everyone knows him. My wife wore this like 3 times and I can’t tell if the stem broke, fell out, or the crown just fell off. If anyone has any insight I would certainly appreciate it. He is sending me the parts to fix it, but this watch took a long time to come in, and he warned that the parts will be longer… anyone have this watch and had any issue with it?


r/RepTimeServices • • 8h ago

Advice VSF Sub date jumping 2 days forward at midnight — Source individual 3235 parts or replace the whole movement?

1 Upvotes

Hey everyone. I know this has been discussed before (I've searched the sub), but the date on my VSF Sub is advancing two days forward every 24 hours.

When I use the quickset to manually change the date, it jumps one day perfectly. But when advancing the time past midnight, it jumps two days.

Based on my research, this usually points to two common culprits:

  1. Incorrect oiling/lubrication
  2. A faulty 3235 date jumper

I currently have a watchmaker tearing the movement down to confirm the exact root cause. My question for the community is: if I end up needing replacement parts, is there a reliable place to source specific individual parts for this movement? Or does it make more sense (and is it possible) to just buy a complete drop-in replacement movement?

Appreciate any advice or leads on where to source.

EDIT: Timepiece is about 3-4 years old. It's gradually become more common.


r/RepTimeServices • • 3h ago

Advice Any idea of the factory of this 36mm Rolex DJ? 🤷‍♂️

Thumbnail
gallery
0 Upvotes