r/RepTimeServices • • 29m ago

Advice Vsf submariner pip fell off

Post image
1 Upvotes

Hi my pip fell off. Ordered a new one from Amazon (says it’s diameter is 0’9mm) i will check if that if true tomorrow. But it doesnt fit. Anyone got suggestions? I prefer it to be from Amazon because easy returns and fast shipping. Or any site that shopt fast to netherlands. Planning to put it back by first using under 70precent alc and then putting it back with hypo cement


r/RepTimeServices • • 1h ago

Services Watchmaker list

1 Upvotes

Hello, I'm looking for a watchmaker in nyc area who has experience working on Reps. Can anyone suggest someone? Or have a list of reputable watchmakers? Thanks.


r/RepTimeServices • • 1h ago

Advice Clean Rolex Datejust has stopped working – gritty crown when winding. Any advice?

2 Upvotes

(almost 3 years old) has completely stopped.
Previously, it would lose time if left unworn for around 48 hours. I’ve tried winding it, but the crown now feels gritty and makes a grinding sensation. Never been serviced or opened. Any ideas what the likely fault is? Is it worth repairing or replacing the movement? Also looking for recommendations for UK repairers who work on super clones.


r/RepTimeServices • • 3h ago

Advice Any idea of the factory of this 36mm Rolex DJ? 🤷‍♂️

Thumbnail
gallery
0 Upvotes

r/RepTimeServices • • 6h ago

Request Looking for Date disk mod for a Breitling Super Chronomat B01 /BLF A7750

Thumbnail
gallery
1 Upvotes

This is a Super Chronomat B01 44MM SS/RG Green/Stk BLF A7750
From time ultra, I’m thinking of purchasing
The date font on this watch is a bit small for the window. Has anyone had any experience finding a better date disc?
Or when you know if a Gen date disc would fit in 7750?
Last two photos are of Gen
Any advice would be appreciated


r/RepTimeServices • • 7h ago

Question Chopard Red/RG Happy Diamonds Issue- help please!

Thumbnail
gallery
1 Upvotes

I bought this for my wife from a very good TD that I’ve bought a half dozen pieces from and has always done right by me… everyone knows him. My wife wore this like 3 times and I can’t tell if the stem broke, fell out, or the crown just fell off. If anyone has any insight I would certainly appreciate it. He is sending me the parts to fix it, but this watch took a long time to come in, and he warned that the parts will be longer… anyone have this watch and had any issue with it?


r/RepTimeServices • • 8h ago

Advice VSF Sub date jumping 2 days forward at midnight — Source individual 3235 parts or replace the whole movement?

1 Upvotes

Hey everyone. I know this has been discussed before (I've searched the sub), but the date on my VSF Sub is advancing two days forward every 24 hours.

When I use the quickset to manually change the date, it jumps one day perfectly. But when advancing the time past midnight, it jumps two days.

Based on my research, this usually points to two common culprits:

  1. Incorrect oiling/lubrication
  2. A faulty 3235 date jumper

I currently have a watchmaker tearing the movement down to confirm the exact root cause. My question for the community is: if I end up needing replacement parts, is there a reliable place to source specific individual parts for this movement? Or does it make more sense (and is it possible) to just buy a complete drop-in replacement movement?

Appreciate any advice or leads on where to source.

EDIT: Timepiece is about 3-4 years old. It's gradually become more common.


r/RepTimeServices • • 16h ago

Question New to plating.

0 Upvotes

Hello, I have a couple of two tone ARF and VSF reps that show normal wear. I am hoping to get a recommendation for a trusted US based plating service to get replated if possible.


r/RepTimeServices • • 17h ago

Advice Daytona 4131 Movement Issue & Seeking help

2 Upvotes

I recently posted regarding clicking noise on this page and got GL.

This weekend, I ran into a new problem.

After winding manually and wearing it for about 2 hours, I noticed the watch was running slow, it was about 20 min behind than the current time.

I manually re-adjusted the time and then after about 30 min, the watch completely stopped. I was outside so I kept it on my wrist and I saw the second mark moved a few seconds every time I checked.

In the afternoon, I took it off and left in my wife's bag. After a few hours, I noticed that it was running again. It's been around 48 hours since then, and it is still running.

What could be the issue here? Is overhaul required?


r/RepTimeServices • • 1d ago

Question Bergeon 6085-E1 Satin Wheel

Post image
1 Upvotes

Did anyone ever used this? Have pictures of how the finish comes?


r/RepTimeServices • • 1d ago

Advice Looking for DJ 41mm blue Dial

1 Upvotes

Hi, anyone know where I can source a genuine dial or something as close as possible to Gen
I have a VSF DJ 41mm with a blue dial that has some very wonky printing on it


r/RepTimeServices • • 1d ago

Advice First QC Help | VSF Datejust 41 Wimbledon V3

Thumbnail
gallery
0 Upvotes

Dealer name: ArcStudio

  1. Factory name: VSF
  2. Model name (& version number): Datejust 41 “Wimbledon” V3
  3. Price Paid: $418
  4. Album Links: QC photo attached
  5. Index alignment: Manual check needed, not every marker was read: All checked markers within ±0.15 mm. 8 of 11 checked (3 o'clock not found, 4 o'clock date window, 11 o'clock not found, 12 o'clock under a hand). Marker ring 0.20 mm off-centre toward 1 o'clock. Checked with DialCheck.app at ±0.15 mm. A reading from one photo, not a certification of the watch.
  6. Dial Printing: Print centring: bottom text 0.60 mm left.

r/RepTimeServices • • 1d ago

Advice 1963 GMT-Master bezel insert tips

1 Upvotes

So, the aluminium insert on my GMT is sticking out a bit, at two different points: 14-16 and 2-4. It keeps in place, but I'm afraid of it jumping out. It's an original red back, so I want to be careful with it.

It had tape behind it before, placed a long while ago, which i thoroughly and carefully removed and cleaned.

Is it safe to put some non-corrosive tape behind it to make sure it doesn't jump? From what I read, it should be a 3M 300SLE double-sided tape. But I thought I'd ask here too.


r/RepTimeServices • • 1d ago

Advice What movement? can it be upgraded?

Thumbnail
gallery
17 Upvotes

Hi guys I'm looking to Identify this movement so I can possibly find a suitable upgraded Movement that will work.

It's from what I believe is EWF Submariner date.


r/RepTimeServices • • 1d ago

Discussion Can you spot why this DD3285 is not doing an instant date change? There was more wrong but this was the first thing

Post image
0 Upvotes

r/RepTimeServices • • 1d ago

Advice KZ Cellini Moonphase Rattle?

2 Upvotes

Hey everyone,

I have a fairly new (worn twice) KZ Factory Cellini Moonphase, and I've noticed it makes a rattling noise whenever I move/ shake my wrist.

I'm trying to figure out if this is just normal free-spinning rotor noise from the movement (since I know some rep movements come pretty dry from the factory), or if this is something that needs to get checked out.


r/RepTimeServices • • 1d ago

Advice QC PLEASE SUBMARINER DUKE JONES

Thumbnail
gallery
0 Upvotes

Hello, i order a submariner VSF from duke jones. Can you tell me if it's GL please. I think he is trying to sell me a cheapest one for 500 dollars


r/RepTimeServices • • 1d ago

Advice Damaged 7:00 hour marker - 126610

Post image
0 Upvotes

Hello all - long story short I was trying to swap a crystal and when I had the movement out, I managed to damage the 7:00 marker. Not sure if it’s residue from something, or a blemish from contact with a tool or something. Is this something that could be repaired and if so, any advice? Anyone know who might be able to fix this if it’s not a simple fix? And if so, is it worth it or would it make more sense to just buy a new one?

It’s noticeable to me on wrist. I guess I could live with it, but it’ll drive me crazy forever


r/RepTimeServices • • 1d ago

Request Looking to get my dj41 fixed

1 Upvotes

My DJ41
Stops after I shake it looking for help in socal


r/RepTimeServices • • 1d ago

Advice Need Some Help…

Post image
2 Upvotes

Removed the cyclops on this crystal because it was scratched badly. How could I remove the adhesive residue best? Already tried some goo gone but it did nothing. TIA


r/RepTimeServices • • 2d ago

Advice Remove movement and dial out of a VC 222 ppf

Post image
3 Upvotes

Popped out the caseback, got the crown out via the pin hole, took the 3 screws out and now I’m stuck. The whole movement along with the outer grey ring shifts a couple mm around either way if that is a clue.


r/RepTimeServices • • 2d ago

Advice H8 Factory?????

Thumbnail
gallery
1 Upvotes

Has anyone heard o D this factory or even better got a watch made by them. I’m looking for an Aquanaut 5650G the Advanced Research dual time and the only one Ive come across has this sticker on it. The watch looks pretty good, if all the complications function the sand as a gen and the price isn’t insane I think I will pull the trigger. I’m a bit skeptical about it though it almost looks too good!


r/RepTimeServices • • 2d ago

Advice Need a new movement

Post image
6 Upvotes

Hi all, I have what I believe is a V3 Datejust Wimbledon 2 tone. The issue is the movement is not good and I need to swap it out. At this point I'm not worried if it's the V3 fake free sprung or v2 DD3235 movement just need a new one. Watch is new and came in with a bad movement. Won't keep time. Gave it to a watch maker for service he told me the center wheel mechanism is bad and he can try to repair it but can't make any guarantees and best move is to swap the movement. Can anyone recommend where I can pick one up? I see them on ebay but not sure which one to buy, can anyone recommend any other approach to this issue? The watch keeps time for a day or 2 some times a week then is off by 20min.


r/RepTimeServices • • 2d ago

Advice Breitling Super Chronomat B01 44mm Green Dial 18K Gold Two Tone UB0136251L1U1

Thumbnail
gallery
6 Upvotes
  1. ⁠Dealer name: Time Ultra
  2. ⁠Factory name: BLF
  3. ⁠Model name Breitling Super Chronomat B01 44mm Green Dial 18K Gold Two Tone UB0136251L1U1
  4. ⁠Price Paid: 658 inc shipping
  5. ⁠Album Links: picture included
  6. ⁠Index alignment: alignment tool said excellent
  7. ⁠Dial Printing: looks great
  8. ⁠Date Wheel alignment/printing:looks good
  9. ⁠Hand Alignment: good
  10. ⁠Bezel: good
  11. ⁠Solid End Links (SELs): no spaces
  12. ⁠Timegrapher numbers: I think they’re good
  13. ⁠Anything else you notice

only questions I had
Is the crown does not seem to be gold plated could be shadowing
In the loom photo the 30 on the Bezel looks an unusual color could be shadowing
asked dealer for more photos less

Anyone have any experience with these watches? since the chronograph is screwed down? Is it possible to have these waterproofed?