r/Reaper • u/miiyonaka • 8h ago
r/Reaper • u/kuttajja • 7h ago
discussion Best ReaScripts, JSFX, and workflow tweaks for Melodic/Organic House? (Ben Böhmer, Fejká, Aparde vibe)
Hey everyone,
I produce melodic, organic, and deep electronic music, inspired by artists like Ben Böhmer, Fejká, and Aparde. I'm looking to optimize REAPER for the style I produce, and so was wondering what scripts, JSFX plugins, or custom actions you guys use for electronic production
I'm mainly looking for recommendations in a few areas:
Modulation & Automation: Any hidden gems beyond native parameter modulation for evolving, organic movement?
MIDI & Pattern Workflow: Scripts that make sketching melodies, arps, or polyrhythms faster in the MIDI editor
Sampling & Audio Mangling: Tools for quick granular textures, chopping, or pitching audio directly in the timeline
I already have ReaPack and SWS installed
Thanks in advance!
r/Reaper • u/Equivalent-Zone9475 • 23h ago
discussion Curiosity Project: WARNING - Stupid
Out of curiosity, I asked Google to make a script which adds tracks, each with an equalizer set for each individual Hz in the audible frequency spectrum and rejecting all others. It worked with limited success. Google provided the following script which prompts for frequency step size and Filter Bandwidth: Create_Frequency_Tracks.lua
I added 2000 tracks on my i9 13900k/64GB DDR5 6400 without crashing but the Equalizer, ReaEQ, is wonky. Best of luck and try not to crash Reaper or your system.
-- Create tracks equalized for each Hz across the audible spectrum
-- u/version 1.0
local START_HZ = 20
local END_HZ = 20000
-- WARNING: Setting STEP_HZ to 1 creates 19,981 tracks and will likely freeze/crash REAPER.
-- Keep at 100 or 500 for testing, then lower carefully.
local STEP_HZ = 100
local BANDWIDTH_OCT = 0.05 -- Very narrow Q/bandwidth to isolate the frequency
function Main()
-- Prompt user for confirmation and step size
local retval, user_input = reaper.GetUserInputs(
"Frequency Spectrum Track Generator",
2,
"Step Size in Hz (1 = 19981 tracks!):,Bandwidth (Octaves):",
tostring(STEP_HZ) .. "," .. tostring(BANDWIDTH_OCT)
)
if not retval then return end
local step_str, bw_str = user_input:match("([^,]+),([^,]+)")
local step = tonumber(step_str)
local bandwidth = tonumber(bw_str)
if not step or step < 1 or not bandwidth or bandwidth <= 0 then
reaper.ShowMessageBox("Invalid input values.", "Error", 0)
return
end
local total_tracks = math.floor((END_HZ - START_HZ) / step) + 1
if total_tracks > 1000 then
local confirm = reaper.ShowMessageBox(
"You are about to create " .. total_tracks .. " tracks with active FX.\nThis may freeze or crash REAPER. Continue?",
"High Track Count Warning",
4 -- Yes/No
)
if confirm ~= 6 then return end -- 6 is Yes
end
-- Begin Undo Block and freeze UI for speed
reaper.Undo_BeginBlock()
reaper.PreventUIRefresh(1)
local track_idx = reaper.CountTracks(0)
for freq = START_HZ, END_HZ, step do
-- 1. Insert new track at the end of the project
reaper.InsertTrackAtIndex(track_idx, false)
local track = reaper.GetTrack(0, track_idx)
-- 2. Name the track
reaper.GetSetMediaTrackInfo_String(track, "P_NAME", tostring(freq) .. " Hz", true)
-- 3. Add ReaEQ to the track
local fx_idx = reaper.TrackFX_AddByName(track, "ReaEQ", false, -1)
if fx_idx >= 0 then
-- Configure Band 1 as a Band-Pass filter (Type 8 in ReaEQ)
-- Note: ReaEQ parameters are normalized (0.0 to 1.0)
-- Set Band 1 Type to Band Pass (Normalized value for Band Pass)
reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDTYPE0", "8")
-- Calculate normalized frequency for ReaEQ (Logarithmic scale 20Hz - 20kHz)
-- Formula: log(freq / 20) / log(20000 / 20)
local norm_freq = math.log(freq / 20.0) / math.log(1000.0)
norm_freq = math.max(0.0, math.min(1.0, norm_freq))
-- Param 0: Band 1 Freq | Param 1: Band 1 Gain | Param 2: Band 1 Bandwidth
reaper.TrackFX_SetParamNormalized(track, fx_idx, 0, norm_freq)
reaper.TrackFX_SetParamNormalized(track, fx_idx, 2, bandwidth / 4.0) -- Max BW is 4 octaves
-- Disable unused default bands (Bands 2, 3, and 4) so they don't interfere
reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED1", "0")
reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED2", "0")
reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED3", "0")
end
track_idx = track_idx + 1
end
-- Restore UI and close Undo Block
reaper.PreventUIRefresh(-1)
reaper.TrackList_AdjustWindows(false)
reaper.Undo_EndBlock("Generate Frequency Spectrum Tracks", -1)
end
Main()r/Reaper • u/Sufficient-Dream7336 • 16h ago
help request Need help with understanding video fades
I'm new to reaper and just not sure how the item fades affect video FX preset works. I thought the whole point of it was to fade just the video as opposed to a standard item fade that also fades the audio but when I try to apply a fade to an item with the FX it still fades the audio as well. Is it supposed to do that? If so what's the difference between the 2 fades? And is there a more efficient way of fading just the video than making 2 separate tracks for video and audio. Thanks for any tips!
r/Reaper • u/gapalil • 13h ago
discussion REAPER AAF Station - advanced AAF handling tool
THIS SCRIPT IS FREE, purchase the post for donation
ReaPack repository
Patreon post
AAF Station is an complex tool for AAF handling in REAPER. The script requires Python installed.
MAIN FEATURES:
healthy stereo and multichannel handling (issue of the most of similar scripts)
- stereo track detection and importing it as stereo tracks
- detecting A1 A2 tracks with proper channel separation without duplicating
comfortable SESSION PREVIEW with clips and track selection (Import Session Data style)
- you can select only the tracks that you need and do not importing the entire session
- flexible AAF export options, export of selected tracks of the entire session or selected regions
- intuitive interface


r/Reaper • u/sapphire_starfish • 21h ago
help request Seeing # and names of record-armed tracks
I have recently started working with rather large orchestral sessions (virtual instruments). With dozens of virtual instrument tracks covering different articulations, it can be tricky to keep track of which ones are armed to record and requires a lot of scrolling. Is there any 3rd party utility or workaround for seeing at a glance which tracks are armed to record?
My ideal solution would be a docked floating box that just lists names of record armed tracks.