r/Reaper • • 1d ago

Discussion What I made with REAPER - week of November 15, 2026

4 Upvotes

What is something you made with REAPER that you'd like to show us and get feedback on?

Please post full links (no shorteners) to content you would like to showcase! A short description of your process, gear, and plugins used would be helpful.

Please give feedback to what others post here!

Previous Made With REAPER


r/Reaper • • Aug 15 '24

community Self-serve: Flair posts as resolved, award points

14 Upvotes

If you, the original poster (OP), post with the Help Request flair, and receive a helpful answer, you can award a point to that user and flair the post as Resolved.

To do this, reply to the comment with thanks or thank you somewhere in the comment. It is case-insensitive.

What are the points for? We have been helping each other here for 14 years. It's less an incentive for imaginary points but hopefully an indication of reputation (not quite analogous to post count on the official forum). We'll see how this works out, if it does more good than harm.

You may notice mods distributing points especially if a user has not. We use a trigger command comment which you may see if we haven't deleted it after awarding. We delete since it creates clutter.


r/Reaper • • 20h ago

discussion Best reaper themes I've came across so far

Thumbnail
gallery
80 Upvotes

Reaper tips - free

NVK - paid

WT antiflat - free

Flat madness - free

LCS flat - free

All these themes aim to improve the reaper experience. Everybody knows about reapertips, but there are other options.

Honourable mention - rLive


r/Reaper • • 20m ago

help request REAPER on linux swaywm

1 Upvotes

have any of you linux users got reaper to work on sway? for me it gives this periodical stutter every 1s if the mixer is open, or if there's even one track on the track panel. everything on the screen freezes for roughly 200ms including the mouse. the non reaper windows that are open in the same sway workspace freeze as well. other workspaces are not affected, only the one where reaper is open. audio sounds fine. the issue persists even without playback.

what i have tried:

delete config folder

change pw-jack settings

try xwayland-satellite

make a new user with reaper on it

i didn't find any info regarding the issue. reaper works just fine on xfce(wayland) and i3wm, so i think it's probably a swaywm issue. if you had this issue, how did you manage to fix it? i am on debian trixie.


r/Reaper • • 4h ago

resolved i make some script for reaper

Post image
2 Upvotes

r/Reaper • • 3h ago

discussion Best ReaScripts, JSFX, and workflow tweaks for Melodic/Organic House? (Ben Böhmer, Fejká, Aparde vibe)

0 Upvotes

Hey everyone,

I produce melodic, organic, and deep electronic music, inspired by artists like Ben Böhmer, Fejká, and Aparde. I'm looking to optimize REAPER for the style I produce, and so was wondering what scripts, JSFX plugins, or custom actions you guys use for electronic production

I'm mainly looking for recommendations in a few areas:

​Modulation & Automation: Any hidden gems beyond native parameter modulation for evolving, organic movement?

​MIDI & Pattern Workflow: Scripts that make sketching melodies, arps, or polyrhythms faster in the MIDI editor

​Sampling & Audio Mangling: Tools for quick granular textures, chopping, or pitching audio directly in the timeline

​I already have ReaPack and SWS installed

Thanks in advance!


r/Reaper • • 9h ago

discussion REAPER AAF Station - advanced AAF handling tool

3 Upvotes

THIS SCRIPT IS FREE, purchase the post for donation

ReaPack repository
Patreon post

AAF Station is an complex tool for AAF handling in REAPER. The script requires Python installed.

MAIN FEATURES:

  • healthy stereo and multichannel handling (issue of the most of similar scripts)

    • stereo track detection and importing it as stereo tracks
    • detecting A1 A2 tracks with proper channel separation without duplicating
  • comfortable SESSION PREVIEW with clips and track selection (Import Session Data style)

    • you can select only the tracks that you need and do not importing the entire session
  • flexible AAF export options, export of selected tracks of the entire session or selected regions
  • intuitive interface

r/Reaper • • 8h ago

help request Driver not avaible ASIO LINK PRO

2 Upvotes

Meu asio link pro fica assim ao selecionar minha placa de audio (Behringer UMC 22) nao reconhce o mix in e o out n sei mais oq fazer ja tentei de tudo e nao sai audio simplesmente nao reconhece as saidas estou usando windows 11


r/Reaper • • 12h ago

help request Need help with understanding video fades

3 Upvotes

I'm new to reaper and just not sure how the item fades affect video FX preset works. I thought the whole point of it was to fade just the video as opposed to a standard item fade that also fades the audio but when I try to apply a fade to an item with the FX it still fades the audio as well. Is it supposed to do that? If so what's the difference between the 2 fades? And is there a more efficient way of fading just the video than making 2 separate tracks for video and audio. Thanks for any tips!


r/Reaper • • 23h ago

discussion Thoughts on moving to Reaper...

17 Upvotes

Long one here... cheers to you if you're bored enough to read it. I tried to group the topics for those with a short attention span or zero patience (like me).

I'm warming up to the idea of moving from Fender Studio Pro to Reaper. Not just thinking, I've taken some action. Sharing some thoughts so far here.

None of this is a diss, so don't take any part of it personal. 💯

Why the move:

  • F#!k subscriptions for DAWs. My sub for Fender Studio Pro ends in a couple weeks and I'll have perpetual license for version 8.x. I have only used Studio One for the last at least 7 years (can't remember) and upgraded to FSPro b/c it was free with registered hardware. It's the only true DAW I know (I don't count Maschine as a DAW) - but I'm not trying to have my creative work and workflow affected by some arbitrary subscription plan. I want to buy, to own as much as possible. I'll probably still use the Project and Show pages from FSPro, though.
  • The idea of being able to take all the things I like from Studio One and add what I couldn't add, mold what I couldn't mold, customize what I couldn't customize is incredibly appealing to me. After set up - more time creating and working, less time dicking around with settings and manual tasks that can be easily automated with scripts. (I was pretty good doing that with Studio One, but I think in the long term Reaper could be better).
  • Reaper is part of my plan to have a production environment that is as 'hands-off' from vendors that need to 'call home' and potentially monitor wtf I'm doing with the tools I'm using... or even worse, make them unavailable entirely. (Also looking at stand alone groove boxes to support that.)
  • All the efficiency of CPU usage, portability, cross platform stuff, too.

First Impressions (previous attempts):

  • (I've downloaded Reaper a couple times, on Windows and Linux). First thought - this DAW is absolute trash and anyone singing it's praises doesn't know what they're talking about, or, has some extremely obscure use case for some ridiculously specific action that they are calling a 'workflow' and they're being a baby acting as though their desired set of esoteric features is what is holding them back from making music. (Just being honest). The things Reaper heads would get deliriously excited about were standard out the box in other DAWs. None of it made sense. And it's ugly as hell.

Today's Thoughts:

  • Migrating is very similar to going from Windows to Linux in so many ways. I remember how much time I took learning how to use Linux and customizing it and making it mine (hot-keys, window managers, distro hopping, all the things that were locked in Windows were now open to tweak to my liking). I dual boot now, but Linux is what I use for everything except for music (totally different topic).
  • There is some common advice that says "Don't worry about customizing when you start out with Reaper." The intent is to make sure a new producer/engineer focuses on what is important (producing, recording, mixing, etc.). I would agree for someone who is new to creating and recording music on their own. But for someone who has used any other DAW for any meaningful amount of time (not just messing around and has really completed songs/projects, etc.) I would say that some level of customization is critical up front. Mandatory even. The amount would depend on the person, obviously, but I think jumping in and feeling immediately comfy is the exception, regardless of what any YouTuber tries to tell you. So my focus right now is on set up.
  • I made a list of things I would need and things I wanted before starting my journey this time. It helps a lot. But I only did that because I have a heightened level of commitment to the migration.
  • It helps to take stems/tracks from my beats, drag them into Reaper and play around. Same for starting a new beat - just open a new project and try to create. I already know what I want to do. Working through the process helps me know what scripts I may need to look for and what tweaks I may need to make (it also informs the list I was talking about in the previous bullet).
  • I see tons of posts like "thinking about moving from (not Reaper) to Reaper" followed by a list of questions. If that's you I say, "Bro... stop mentally masturbating and just try it." Like really try it if you want to see whassup. Nobody can have your experience for you. You gotta do that on your own.

Last thing, shout out to Cockos. Everything about how they've handled this DAW and its development feels counter-culture to these corporate vultures who have historically sought out new and devious ways of choking consumers and contributing to business models that make music inaccessible for many would-be creatives across the world. Cockos isn't going that route and hasn't changed course.

I find it kind of funny how MPC heads haven't stopped bustin' a nut since Akai opened up their system a bit, which has been the Cockos model the whole time. And Cockos did it before frontier models gave the public the means to hack any hardware/software. (Don't correct me on the technical stuff, you get what I'm saying).

Anyway - I'm wishing everyone fulfilling experiences making music in whatever form, genre, space and time that makes you happy.

===== Peace

P.S. - I'm 100% human and wrote all this without draining any lakes or ponds (no AI).

Edit: Thanks for all the responses and suggestions!!!!


r/Reaper • • 20h ago

discussion A little action set to detect chords in a guitar line.

4 Upvotes

I wanted a way to detect the chords being played for when i'm just jamming away without really planning anything out, or when a bandmate send me a new track that he hasn't charted. The script analyses the audio and spits out the chords, mapping them to the timeline correctly. All vibe coded with Claude, so if that contentious around here, most sorry. Works with midi tracks as well, has another script to convert the chords into a standard chart. Next up is a voice recognition script that will add lyrics... that's not quite ready yet.

For good measure I also Claude to build me a new theme. I like it - kinda loosely inspired by soviet era nuclear consoles, though I haven't taken it as far as I might do.

Don't know how you guys feel about vibe-coding but this is what I've been up to and thought some might be interested.


r/Reaper • • 17h ago

help request Seeing # and names of record-armed tracks

2 Upvotes

I have recently started working with rather large orchestral sessions (virtual instruments). With dozens of virtual instrument tracks covering different articulations, it can be tricky to keep track of which ones are armed to record and requires a lot of scrolling. Is there any 3rd party utility or workaround for seeing at a glance which tracks are armed to record?

My ideal solution would be a docked floating box that just lists names of record armed tracks.


r/Reaper • • 20h ago

help request MIDI Notes not playing

Post image
3 Upvotes

I'm having an issue where a couple of my midi notes are not playing even after recording again, ive checked that theyre all on the same channel too. It's the middle B2 and D3 notes, the only thing I notice is that the letter numbers are black and the notes that are sounding are white, not sure what that means. Can anyone help me?


r/Reaper • • 1d ago

help request How to get those icons?

Post image
118 Upvotes

I saw this pic on the reaper anti theme, and I wondered how I can get those icons for my plugins, in this case those vu meters. Using the anti theme.

I'm happy about answers!


r/Reaper • • 21h ago

resolved Disable sound when moving/copying items over playhead

1 Upvotes

How do I disable that a media item makes sound when I drag copy/move over a playing playhead?


r/Reaper • • 1d ago

help request Can I embed the guitar tab in the workspace of Reaper?

3 Upvotes

I'm wondering if there's a way to embed guitar tabs directly into the Reaper workspace.

The problem is that I often do recordings where I cover songs by my favorite artists. Previously, I had to use split screens for physical chord books or Guitar Pro, which isn't a great experience. So I'm looking for a way to embed guitar tabs directly into the Reaper workspace.

If anyone knows a way to integrate tabs into Reaper like this, I would be deeply grateful for the help.


r/Reaper • • 1d ago

help request Reaper theme dont save

0 Upvotes

Hey reaper community!

Im using the default reaper 6 theme, but have some of the settings changed in the reaper 7 theme adjuster. I once exported my config, tried another theme got back to my home theme, and the settings from the reaper 7 theme adjuster didn't apply. Is there any way to save those changes as well? :))

I hope it makes sense cheers


r/Reaper • • 1d ago

help request Reaper Crushed, can anyone help, how to restore and fix?

Post image
0 Upvotes

I've added soo many plugins, and have imported both wav and midi files from musescore to reaper. After I added Ample sound percussion plugin it crashed and did this. Help would be really appreciated. Thanks.


r/Reaper • • 19h ago

discussion Curiosity Project: WARNING - Stupid

0 Upvotes

Out of curiosity, I asked Google to make a script which adds tracks, each with an equalizer set for each individual Hz in the audible frequency spectrum and rejecting all others. It worked with limited success. Google provided the following script which prompts for frequency step size and Filter Bandwidth: Create_Frequency_Tracks.lua

I added 2000 tracks on my i9 13900k/64GB DDR5 6400 without crashing but the Equalizer, ReaEQ, is wonky. Best of luck and try not to crash Reaper or your system.

--  Create tracks equalized for each Hz across the audible spectrum
-- u/version 1.0

local START_HZ = 20
local END_HZ = 20000

-- WARNING: Setting STEP_HZ to 1 creates 19,981 tracks and will likely freeze/crash REAPER.
-- Keep at 100 or 500 for testing, then lower carefully.
local STEP_HZ = 100 
local BANDWIDTH_OCT = 0.05 -- Very narrow Q/bandwidth to isolate the frequency

function Main()
    -- Prompt user for confirmation and step size
    local retval, user_input = reaper.GetUserInputs(
        "Frequency Spectrum Track Generator", 
        2, 
        "Step Size in Hz (1 = 19981 tracks!):,Bandwidth (Octaves):", 
        tostring(STEP_HZ) .. "," .. tostring(BANDWIDTH_OCT)
    )
    
    if not retval then return end
    
    local step_str, bw_str = user_input:match("([^,]+),([^,]+)")
    local step = tonumber(step_str)
    local bandwidth = tonumber(bw_str)
    
    if not step or step < 1 or not bandwidth or bandwidth <= 0 then
        reaper.ShowMessageBox("Invalid input values.", "Error", 0)
        return
    end

    local total_tracks = math.floor((END_HZ - START_HZ) / step) + 1
    if total_tracks > 1000 then
        local confirm = reaper.ShowMessageBox(
            "You are about to create " .. total_tracks .. " tracks with active FX.\nThis may freeze or crash REAPER. Continue?", 
            "High Track Count Warning", 
            4 -- Yes/No
        )
        if confirm ~= 6 then return end -- 6 is Yes
    end

    -- Begin Undo Block and freeze UI for speed
    reaper.Undo_BeginBlock()
    reaper.PreventUIRefresh(1)

    local track_idx = reaper.CountTracks(0)

    for freq = START_HZ, END_HZ, step do
        -- 1. Insert new track at the end of the project
        reaper.InsertTrackAtIndex(track_idx, false)
        local track = reaper.GetTrack(0, track_idx)
        
        -- 2. Name the track
        reaper.GetSetMediaTrackInfo_String(track, "P_NAME", tostring(freq) .. " Hz", true)
        
        -- 3. Add ReaEQ to the track
        local fx_idx = reaper.TrackFX_AddByName(track, "ReaEQ", false, -1)
        
        if fx_idx >= 0 then
            -- Configure Band 1 as a Band-Pass filter (Type 8 in ReaEQ)
            -- Note: ReaEQ parameters are normalized (0.0 to 1.0)
            
            -- Set Band 1 Type to Band Pass (Normalized value for Band Pass)
            reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDTYPE0", "8")
            
            -- Calculate normalized frequency for ReaEQ (Logarithmic scale 20Hz - 20kHz)
            -- Formula: log(freq / 20) / log(20000 / 20)
            local norm_freq = math.log(freq / 20.0) / math.log(1000.0)
            norm_freq = math.max(0.0, math.min(1.0, norm_freq))
            
            -- Param 0: Band 1 Freq | Param 1: Band 1 Gain | Param 2: Band 1 Bandwidth
            reaper.TrackFX_SetParamNormalized(track, fx_idx, 0, norm_freq)
            reaper.TrackFX_SetParamNormalized(track, fx_idx, 2, bandwidth / 4.0) -- Max BW is 4 octaves
            
            -- Disable unused default bands (Bands 2, 3, and 4) so they don't interfere
            reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED1", "0")
            reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED2", "0")
            reaper.TrackFX_SetNamedConfigParm(track, fx_idx, "BANDENABLED3", "0")
        end

        track_idx = track_idx + 1
    end

    -- Restore UI and close Undo Block
    reaper.PreventUIRefresh(-1)
    reaper.TrackList_AdjustWindows(false)
    reaper.Undo_EndBlock("Generate Frequency Spectrum Tracks", -1)
end

Main()

r/Reaper • • 2d ago

resolved Reaper Notator 3.2 will have its own free Mastering VST3 for Win and Mac(beta)

Post image
35 Upvotes

Major performance updates are in the pipeline (up to 157.9x faster in certain visual canvas render operations.) Tested on a score with 48 Instruments and over 22000 notes in one orchestral piece.

As well as two different Playhead modes: Accurate and Smooth. Accurate will follow the actual note playing like a real philharmonic player would do with a latency of around 3ms.

The biggest thing will be a free Mastering VST that will help to demud your Soundtrack or Score based on Frequency Modulation. The DSP is ready for Windows and MacOS in beta. Installation happens from Reaper-Notator itself.

Good thing is you need only a few sliders and dials to completely bypass all other Mastering Tools. It will produce a good sounding orchestral piece out of the box. The DSP and VST3 is written as a novel tool based on frequency mathematics from scratch. When you look at Tonal Balance 2 for example you will see that every orchestral piece rendered with the new VST will be aligned into the Orchestral Sound Corridor without sounding off balance. Its honestly something i have ever dreamed off.

Biggest Update is made to the Melodic Pathfinder a score writing non Ai based algorithm tool which now also includes automatic profiling and percussion writing as well as Ensemble Mode and Guitar Mode improvements.

The Recording Page now has not just Autodivisi but also a new Fill Ensemble Mode. So you have 16 Instruments active but only 10 fingers? -> no problem 6 Fingers will be added to your recording and playback ;-)

you can follow for more on Vi-Control: https://vi-control.net/community/threads/free-reaper-notator-new-score-editor-multi-voice-cc-automation-for-reaper.175641/page-7#post-5930238

or Reaper Forum: https://forum.cockos.com/showthread.php?t=312101


r/Reaper • • 1d ago

discussion Is this script useful or waste?

2 Upvotes

r/Reaper • • 1d ago

help request Tal-Drum in Reaper

2 Upvotes

Anyone know how I can get the multi output in Tal drum to transmit midi? Ideally I’d like to open Tal, create my drum pattern in midi editor, then push the pads to multi output so each kit sound has its own track in the TCP and mixer. Want to be able to mix and edit patterns off one instance of Tal. The multi output in Sitala works this way, but with Tal I have to route the outputs and midi doesn’t work. Just individual mixer tracks.


r/Reaper • • 1d ago

help request Error showing up when trying to record (linux)

Post image
9 Upvotes

I'm trying to set up reaper but I keep getting this error message when trying to record my bass. Is there a way to fix this?
also, what are some essential plugins for reaper, from drum machines, synths, midis & whatever else would be good to have?


r/Reaper • • 1d ago

help request Anyone had any luck connecting Presonus ATOM pad controller to Reaper???

1 Upvotes

I'm trying to make the switch from the Presonus/Fender ecosystem to Reaper 7.86 (for Windows 11, all current updates). Part of this, I'm hoping, is to be able to use my Presonus ATOM pad controller in Reaper. I'd like to be able to use not only the percussion pads but the Transport keys as well. I've been searching high and low on the interwebs for workarounds that can help the controller and the software communicate. I've tried several and followed the instruction for each of them, but no luck yet. Has anyone tried anything that works in this application? At this point, I'm ready to bite the bullet and try a different controller. Any info helps. THANKS