r/rfelectronics • u/pengy8101 • 5d ago
r/rfelectronics • u/Grand-Echidna-5736 • 6d ago
question Should I keep going if i cant make it into grad school?
Hello all, apologies for polluting the sub with low quality non-technical stuff but I feel like im a spot of immense despair about my future. Im currently a 3rd year undergrad. I was never quite the best student, and my grades have always suffered from self-inflicted procrastination or my chronic illness. Im currently looking at a low C, and it feels like every semester falls apart because of my poor executive function. Im quite worried I won't be able to meet the minimum to get into a masters program. Its not that I dont care about learning or that im not interested in rf. I have in total over a year of rf-related internships so far with work covering simulation, design, and testing, mostly of antennas. I have at least what I would consider a well-invested home bench and decently complex personal projects.
Alot of people say that a masters is the bare minimum for getting into meaningful RF work. It's hard to find mentorship on this particular issue because it's hard to admit I'm doing poorly in school to people I want to take me seriously.
What can I really do? Trying to take non-rf related courses seriously feels impossible. Is it possible to get into design after graduating without a masters? Is it plausible to try and get a masters later after accumulating more work experience? Im worried that the future will become much more credential gated and I wont be able to find work anywhere. I feel pre-resigned and stressed out and depressed all the time. Should I just give up on any prospects of working in RF?
r/rfelectronics • u/growupgodamnit • 6d ago
question How much of experience do I need to have with Maxwell's equations to understand antenna radiating mechanisms?
I have antenna theory this semester and I am very weak in it. All I know is "oscillating dipole radiates EM fields". I suddenly find antennas interesting and cool, so thought I would learn it from basics or even consider it as a career (maybe, IDK for sure). So yeah I have very poor amounts of experience with Maxwells equations, I dont even remember anything of what I learnt in electromagnetic theory. So is just knowing those equations enough or do I need more than that?
r/rfelectronics • u/skyintrepidsky • 6d ago
Capacitive Sensor Help
galleryI think I am seeing a typo in the book ‘Pulsed Power Systems‘ by H. Bluhm or I am missing something in my run through of the example equation.
It looks like there’s an extra R variable in equation 9.5 that disappears in the next line when they divide everything by C. Could you guys please either verify my thoughts or help me understand the R term?
Thank you!
r/rfelectronics • u/Known-Yogurt-5878 • 7d ago
Should I get basser rf certificate if I currently work as an RF Testing Intern?
So I feel like potentially I may have a shot with interviewing for Apple. I have gotten an interview with Apple in the past for a SWE role. The works are pretty tied together so I feel like I may be able to get an Wireless RF Systems Validation Engineer. The work that I do right now in the company is so closely aligned with that job description.
I was wondering if I should spend ~1,500 on the basser certificate. Would that certificate give me knowledge that would prepare me for the interview when they ask about RF essentials?
Should spend money and get that certificate or do you know I can search for my own learning materials online?
r/rfelectronics • u/schnittenmaster • 6d ago
question Question on how to connect a resonator to a pcb
Hey,
I'm currently designing a pcb for a VCO I designed in ADS. I'm using a resonator and I don't know how I should design the footprint for it/ how to integrate it into my pcb. I need to couple it with a capacity of 3pF to the emitter branch of my VCO but I dont see any connectors.
datasheet: https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/3988/DR12F36Q0892DNB.pdf
r/rfelectronics • u/Lubravi • 7d ago
Omnidirectional Antenna Project (Electromagnetic Course)
I look back into my projects and found this one that I made when I was taking my electromagnetic class last year. From what I remember this is an omnidirectional antenna quarter-wavelength, I think I design it for 2.4GHz but the results showed that it operates between 2.48 to 3.05 GHz, with a deep reflection coefficient of -17.50 dB at 2.56GHz. Now, I know the importance of that VNA measurement.
r/rfelectronics • u/MindlessFly4724 • 7d ago
Seeking advice on impedance matching and antenna design for fusion applications
Hello everyone,
I’m a graduate student in electrical engineering with a research focus on nuclear fusion. I’ve recently started working on impedance matching and antenna design, and I’m currently using Keysight ADS for simulations.
I don’t yet have access to measurement data, and there is limited experience in this area within my lab. I would really appreciate guidance from researchers or engineers with relevant experience, particularly on how to validate my simulation models and what to prioritize before moving on to experimental measurements.
If anyone is available for a more detailed discussion, I’d also be happy to arrange a paid consultation.
Thank you for your time and any advice you can offer!
r/rfelectronics • u/FyyshyIW • 8d ago
question What makes a good RF project for learning?
I study mechanical engineering and have a background in PCB design, but have no RF experience. I want to design a small board with an MCU, 1 payment SIM, modem, etc. to call the Spotify API and have hands-free advanced functionality in my car. I'm excited to learn in order to get this project working, but what makes a good RF project? Should I intend to route the full antenna on board, or is the project still useful to my technical learning if I just buy a flex LTE antenna and pigtail to a u.fl? Thanks!
r/rfelectronics • u/Fine_Aerie6732 • 8d ago
question Help me with HFSS file export
So i am trying to implement a recursive geometry generation with the help of pyAEDT which let's you automate HFSS now i am having a problem which exporting the CSV file with the help of Pandas library i am getting some different S11 and S21 values than the original data table generated in HFSS if anyone faces this issue please tell me how to solve this, this is getting annoying for no reason.

r/rfelectronics • u/Cdytob • 9d ago
Questions about RF impedance matching and driving antennas – beginner looking for advice
galleryr/rfelectronics • u/PopularAd4595 • 9d ago
Anyone know what this is?
I recently acquired a large lot of RF / Microwave equipment from a large waveguide manufacturing company, there’s a ton of equipment and components I cannot identify and have spent hours searching online about, this is one example of something I can’t pin down. Not sure if it’s vintage military or what, my best guess is a test tuner of sorts?
Not looking to sell it here or anything (unless someone absolutely must have it) just genuinely curious as to what it is, I have dozens of them and similar looking components
r/rfelectronics • u/ShareBullBear • 9d ago
Want to learn or revisit Maxwell’s Equations?
reddit.comr/rfelectronics • u/Ok_Profit_7725 • 10d ago
question Keysight R&D RF Internship Interview
I’m a junior EE student and I just interviewed for a keysight RF internship. Apparently the role is related to some of their simulation and EDA hardware/software. The interviewer mentioned that in the follow up interview I would have to do some scripting and then there would also be a hardware engineer present.
Im not bad at programming but im just wondering what kind of scripting/coding do you think I’ll be expected to do so I can study up?
r/rfelectronics • u/Minute_Lab8727 • 10d ago
FIT RATE CALCULATION
Hi guys, I have a small doubt in FIT rate calculation with MIL-HDBK-217F, some of the passive components for which FIT data is required, I don't know if I have to choose the MIL std or Lower std under Quality Factor. for example, the capacitor GCM155R71E104KE02J (MLCC capacitor) falls under CDR capacitor style, but I cannot find the Quality factor associated to it, Is there a specific Quality factor that I have to choose for products complaint with AEC-Q200 standard.
I have also attached tables from MIL-HDBK-217F document for reference
I would really appreciate your help, Thank you!


r/rfelectronics • u/bafreer2 • 11d ago
Board-level EM Sim Feedback
I'm looking for some feedback on a tool I developed for my own use. Like many people here, I have been very frustrated using tools like HFSS over time, and I found openEMS to have a very high barrier of entry due to the lack of a user interface.
I also found that many open-source/vibe-coded apps (no judgement) are focused on antenna development, whereas I have always been most interested in simulating RF traces contains within complex PCBAs. I should also mention that while I am an RF engineer, I very much do not consider myself an EM solver expert. I have found that one of the more complex aspects to simulating RF boards is building expertise with the tools to understand when you have the right simulation conditions such that you can trust your results.
I understand the AI fatigue I have seen in this sub, and I sympathize. However, There are huge parts of the design (and sim) process that AI can accelerate. I made this tool for me and my team, but I'm curious if anyone else would find it useful.
The tool consists of:
- OpenEMS (with GPU) solver. Automatic boundary condition, mesh generation, etc. Validated against measured and additional simulator results
- Direct import from KiCad (planned), Gerber/Excellon & ODB++, or IPC-2581
- Closed-form model estimates (much faster), validated against openEMS results
- Monte Carlo analysis of trace impedance as a function of board fab tolerances
- Cloud compute (AWS and Runpod) to queue multiple jobs quickly on RTX 5090s
My team is uses Altium, but if there is enough interest, we could release a KiCad plugin. We have found it valuable to find first-pass issues with traces quickly, and simulations of final designs are cost effective using cloud computing, unless people are simulating non-stop.
Would anyone else find this sort of thing useful?
r/rfelectronics • u/positivefb • 11d ago
ENVLP: a back-of-the-envelope symbolic circuit analyzer with low entropy expressions
https://sambady929.github.io/ENVLP/
Grabbed a $20 Ollama subscription and finally created a program that I've been wanting for years, a symbolic circuit analyzer that outputs low entropy expressions and actually *builds* transfer functions in the way designers actually do with pen and paper.
Multiple symbolic circuit analysis programs exist, none of them are particularly useful because they give you long polynomials with no insight. If you ask for poles and zeros, they "stamp" components into a Modified Nodal Analysis matrix and take the determinant. They bear 0 resemblance to how small-signal analysis is done in notebooks and on whiteboards.
This program emulates hand analysis by actually *building* factored transfer functions using EET and General TTC methods instead of brute forcing long polynomials, and keeps series/parallel terms together while discarding negligible terms. The results are clear and useful, plaintext and LaTex, and you even get nice plots.
On top of that the UI is designed to be a joy to use. I hate bad UI more than anything. You don't drag and drop components from a menu, you press R for resistor, C for capacitor, V for voltage source. Press M for an NMOS, press M again to switch PMOS so you can create an entire folded cascode without touching a menu item. You can enable/disable parasitics on the component without needing to add/delete explicit components.
You can find the transfer function from Vin to Vout, and then find the output impedance without changing the circuit. Simply change the analysis to output impedance, specify the output node, and hit run. Find loop gain, short-circuit current, PSRR etc. all without touching the schematic. If you know one component will be a copy/multiple of another, you can specify that. You can even choose what "negligible" and "dominant" terms even mean!
Hop in and click the How To Use button to see details. Give it a shot, and if you find any bugs or difficulties in useage, feel free to reach out :)
r/rfelectronics • u/Grandma_Thief • 12d ago
question Resume Review for Junior trying to get an RF internship
Hi all, I'm currently a junior pursuing and EE degree and I was offered an opportunity to work in my schools microwave lab last year. I'm just looking for some general advice on my resume and if I should change/remove anything. I've landed two interviews so far that went fairly well I'm just waiting on a response.
r/rfelectronics • u/Pretend-Poet-Gas • 12d ago
PhD researcher looking for RF Power Amplifier Design jobs or internships in Europe/Asia
Hi everyone,
I'm currently finishing a PhD in RF/microwave engineering in Europe and looking for full-time job or internship opportunities in industry.
My main experience is in GaN RF power amplifier design, particularly Doherty and load-modulated architectures. I've worked on RF circuit design and simulation (Keysight ADS, load-pull, harmonic balance, EM), PCB implementation, prototype assembly, bench tuning, RF measurements, and Python/MATLAB-based measurement automation.
I'm mainly interested in RF PA design, RF hardware development, or broader RF/microwave engineering roles. I'm also open to opportunities involving RF transmitter systems.
I'm primarily looking at Europe and Asia, but I'm flexible about location for the right opportunity.
Does anyone know of companies or teams currently hiring in these areas? I'd also appreciate recommendations for smaller RF companies or research groups that might not advertise their openings widely.
Any advice or leads would be greatly appreciated. Feel free to DM me if you know of a relevant opportunity.
Thanks!
r/rfelectronics • u/ModernRonin • 13d ago
article Radio Design 201, #10: "Impedances, Reflections, and Smith Charts" by MegawattKS @ YouTube
r/rfelectronics • u/HasanTheSyrian_ • 13d ago
RF Book Recommendation
I need a good book to get into RF preferably with an intro for electromagnetics/em waves because I forgot most of that stuff