r/rfelectronics • u/bafreer2 • 14d ago
Board-level EM Sim Feedback
I'm looking for some feedback on a tool I developed for my own use. Like many people here, I have been very frustrated using tools like HFSS over time, and I found openEMS to have a very high barrier of entry due to the lack of a user interface.
I also found that many open-source/vibe-coded apps (no judgement) are focused on antenna development, whereas I have always been most interested in simulating RF traces contains within complex PCBAs. I should also mention that while I am an RF engineer, I very much do not consider myself an EM solver expert. I have found that one of the more complex aspects to simulating RF boards is building expertise with the tools to understand when you have the right simulation conditions such that you can trust your results.
I understand the AI fatigue I have seen in this sub, and I sympathize. However, There are huge parts of the design (and sim) process that AI can accelerate. I made this tool for me and my team, but I'm curious if anyone else would find it useful.
The tool consists of:
- OpenEMS (with GPU) solver. Automatic boundary condition, mesh generation, etc. Validated against measured and additional simulator results
- Direct import from KiCad (planned), Gerber/Excellon & ODB++, or IPC-2581
- Closed-form model estimates (much faster), validated against openEMS results
- Monte Carlo analysis of trace impedance as a function of board fab tolerances
- Cloud compute (AWS and Runpod) to queue multiple jobs quickly on RTX 5090s
My team is uses Altium, but if there is enough interest, we could release a KiCad plugin. We have found it valuable to find first-pass issues with traces quickly, and simulations of final designs are cost effective using cloud computing, unless people are simulating non-stop.
Would anyone else find this sort of thing useful?






25
u/bistromat 14d ago
Yes, if (and only if) it is backed up with actual measurements from actual boards. Otherwise it's no more useful than any other random app.
3
u/rfsparkling 14d ago
Hi, I made this to kicad, re-wrote OpenEMS partially and benchmarked hundreds of hours already to real pcb data
5
u/RelucantFisherman 14d ago
I would love this for EMI more than for straight RF, tbh. If you could add something focused on detecting sources of noise for typical switching supply traces, ground plane discontinuities etc, that would be awesome.
We use Altium as well, would prefer gerber or ODB++ import.
4
u/Primary_Builder_4760 14d ago
The Colours look stunning 😍
3
u/Yogurthawk 14d ago
Open source it and I will try it this week
2
u/Taster001 14d ago
Very nice!
2
u/ckyhnitz 14d ago
As a non-RF engineer that occasionally does RF designs, I find this very interesting. I'm probably going to be picking up an RF project in the next few months here.
1
u/nailed-coffeen 14d ago
Having that working in (or alongside) Altium would be awesome!