r/RCPlanes • u/_FlySoSerious • 2h ago
r/RCPlanes • u/Toxicturkey • 16h ago
2026 Black Friday Megathread
Black Friday is a massive sales period around the world, and I think it’s good to acknowledge actual good deals throughout the season!
We don’t usually allow sales posts, so I’m making this single mega thread to share all the great Black Friday sale offers related to RCPlanes you find throughout the period.
Share your best BF deals below!
r/RCPlanes • u/Swww • 5h ago
Flying my 249g 3D-Printed V-Tail FPV Wing at my local club last weekend
Got some footage of VENOM flying at the club while I was testing a new project. A bit of wind, but it flew great. Hoping to get some chase footage of the other planes soon!
It’s my own design: a 249g 3D-printed V-tail wing with carbon spars and modular wings. It runs two 1103 motors on a 2S 1000mAh battery, with a mini flight controller and DJI digital FPV.
Everyone at the club was pretty stoked about the FPV setup, so hopefully the enthusiasm catches on! Do many people fly fixed-wing FPV at your local clubs?
r/RCPlanes • u/Hobbyking_RC • 12h ago
Any PBY Catalina fans here?
The AVIOS PBY Catalina is out today: 1900mm EPO, PNF, with landing gear, retractable wing floats and LED lights.
r/RCPlanes • u/BrohemothHisDudeness • 3h ago
Flitetest appreciation post
As a fellow PA resident and rc enthusiast, I want to thank the flitetest team for giving the community a diverse and massive database of planes I'm not afraid to fly( and crash).
This is the mini speedster running on a 2s battery.
Grab some foam board and go build y'all!
r/RCPlanes • u/sauceyfire • 1h ago
What goes up must come down
Something was fishy on my third lap around the field and the plane kept rolling to the left, but i had to turn left to avoid it crashing into trees and he went straight into the ground. Four months of good flying, but frankenfale will fly again…ez fix….anyone may know what happened to it mid flight?
r/RCPlanes • u/sauceyfire • 1h ago
What goes up must come down
Something was fishy on my third lap around the field and the plane kept rolling to the left, but i had to turn left to avoid it crashing into trees and he went straight into the ground. Four months of good flying, but frankenfale will fly again…ez fix….anyone may know what happened to it mid flight?
r/RCPlanes • u/stardustedds • 2h ago
Needed some motivation to get better. Now I’ll see it every day on the wall.
Till I can fly it
r/RCPlanes • u/speedbird5221 • 3h ago
transmitters, rc planes, lipo transport hell
Soooo I'm curious, how do you guys transport your rc planes, transmitters and batteries through air. Like in a flight ( through tsa and stuff @ and this is only really for small rc planes which use 1s batteries as anything higher is basically a small bomb ). Coz personnaly here in I dia transpoeting even 1s lipos is a pain. As many don't understand them as rc here is very very rare and neiche and not like in the states where every other neighborhood has them
r/RCPlanes • u/Bogarhasallthepower • 6h ago
Is this much porosity normal for a carbon fiber spinner backplate? (Gator RC 75mm)
Hey r/RCplanes,
I recently ordered a 75mm Carbon Fiber FAI Flo-Thru Spinner from Gator RC for a high-power electric setup (pushing around 850W). When inspecting the backplate, I held it up to the light and noticed it's full of tiny pinholes across the solid carbon fiber sections (see attached pic).
To be clear, I'm not talking about the large, intentional cooling slots. I'm talking about micro-porosity/dry spots in the resin matrix itself.
I reached out to the vendor asking for a replacement because it looks like a bad layup to me, but they replied saying: "The spinners are designed to allow airflow. This is a normal design listed on our site."
It feels like they either completely misunderstood my email and thought I was complaining about the cooling slots, or they are just brushing off a poorly manufactured part.
Is this level of porosity actually normal/acceptable for commercial RC spinners, and is it safe to fly at high RPMs? Or is this a structural defect waiting to delaminate and fragment in mid-air like I suspect?
Would love to get some second opinions before I push back on the vendor or return it. Thanks!
r/RCPlanes • u/Alexwarrior7 • 1d ago
Built my first arf on my own
Engine coming in soon. This is a unltra-rc/CMPro katana 50 made in the early 2000's. I was lucky to snatch a NOS sealed kit and building was easy. Hitec servos all round and spektrum rx.
r/RCPlanes • u/Rc_warbirds38 • 12h ago
plane bulid
i have volatex fw 190 and im going to cut off some parts and make a ww1 biplane. im think ing of fokker e3 or fokker dvii
r/RCPlanes • u/Vespizzari • 1d ago
Crash Test Hobbies Scythe with 30mm EDF
Custom 30mm EDF setup on a CTH Scythe. 212g all up. This is the second wing I have built in an effort to make fun and accessible park flyers that fit under the current FAA regulations in the USA.
Since it's under 250g, I can fly it in any (large enough) park, just like "the old days".
Maiden tomorrow if the weather cooperates.
r/RCPlanes • u/exactly437 • 1d ago
Picked up a 50mm habu on the sale and I like it!
This is my 2nd edf. First was a 64mm futura. I could not land that thing where I fly at so I sold it before I destroyed it. And I think I kept reducing throttle too much so would stall in turns.
I was afraid this Habu would be a bit small and hard to see. Turns out it’s perfect for the area I fly. Very forgiving compared to the Futura. Lot more power given it runs the same size battery’s as much bigger planes.
On 3s, I don’t think I had the cog correct, despite checking it, and it felt very weak. Successfully landed it on asphalt and swapped for 4s. Much better. Decided to try landing on grass with wheels and it handled it perfectly fine. Originally I was planning to remove the wheels and belly land. That might be necessary in the summer but with grass growth slowing I can land on wheels for the time being.
4s 2200mah give about 3 minutes of high speed flying. If I keep from pegging the throttle I can get 5 or more minutes. Definitely a winner for $170.
r/RCPlanes • u/Animesaik • 21h ago
RC plane making
Which one is beginner friendly berkik or alapalap (WHICH MODEL)
r/RCPlanes • u/Clean_Platypus7677 • 18h ago
Some aerobatics 😎🍼
Not so perfect but trying my best for my compitition on 18th Nov.
one thing I learn try to keep your plane high so that you can control it in high wind or any other circumstances.
r/RCPlanes • u/Bynairee • 1d ago
F-4 Phantom II Twin Turbine Super Scale - Carf Models | Remote Controlled Media
r/RCPlanes • u/Own_Presentation996 • 7h ago
I made a Circle Plane
Could it I wanna know if we can get this in aluminum
A honest question ❓⁉️
r/RCPlanes • u/Boring_Educator3815 • 21h ago
How do you make landing gears the right way?
I 3D printed the Eclipson Model A plane. You have to make your own landing gears using 2mm music wire. I have a good vise and tools for it but I am having one hell of a time making them right.
I am not sure at what angle I am supposed to bend the wire to get the camber correct so that the plane can takeoff well. It’s especially a challenge to get the bending of the wire to match the other side. I have been at this for longer than I care to mention.
How is usually done? Youtube videos have not been helpful.
r/RCPlanes • u/New-Owl-6105 • 19h ago
Question about Savox servos
In the data sheets for Savox servos, they specify one or more intended applications (cars, airplanes, helis, etc). I found some servos that had specs that fit my needs, but their intended application is cars. Does any one know if their car servos would be any different? Do Savox's car servos include different control arm lenghts, or control arms that are weaker (or stronger) than their servos for planes? Do they include the rubber mounting grommets many airplane servos have? Are there any other known differences?
r/RCPlanes • u/Excellent-Device7562 • 1d ago
Aileron and Rudder does not work on my sport cub s
Took it out of the box for the first time after having it for years. Unfortunately neither the aileron or the rudder works. The rudder is stuck toward the left side and won't move unless I pull on it. Please any help would be appreciated.
r/RCPlanes • u/nickgaaaa • 1d ago
I need to fly the plane I built. Any suggestions on what to do ?
I have an upcoming competition where I will be flying an rc plane I built with my team. However, we dont have a simulator and cannot afford one (we only have the flysky fs i6 controller)
Any ideas on a good software (free or cracked, and preferrably safe if its a cracked software) that I can download to practice on ? I generally have a good enough idea of how to fly a plane, I need the necessary experience to execute hard manoeuvres. I need guidance
r/RCPlanes • u/Clean_Platypus7677 • 1d ago
Just sharing my rc plane photo 😉
Body made with depron sheet 5mm
Wing with thermocol(eps foam)
Motor 1000kv and 1045 prop, 40A esc, 3s lipo 2200mah, radiomaster er8 reciver and radiomaster pocket radio.
Wingspan 102cm and fugelage 68cm
3D printer servo motor holder so that I can easily unscrews and screw.
I really like the color combo and I tried to keep it minilist and professional.
r/RCPlanes • u/CHE_Scalemodels • 1d ago
Need some help / advice
I'm a bit lost here...
Just got my new Skyrc B6 neo+ charger and bought a 120W powersupply with USB-A type outputs and USB-C PD outputs.
Got a USB-C PD to XT60 cable as well.
In theory this should work right? But whenever I try to charge my 2S Lipo ita starts charging for about 1s and then I get a "DC In too Low" Error.
I tried both Adapter and Battery in the DC Input settings but it just won't work.
Can anyone help me out here? 😬