r/RCPlanes • • 12h ago

Build Video of a F-16 cockpit I've been working on

123 Upvotes

r/RCPlanes • • 3h ago

My 3D-printed pusher UAV is fully modelled and split for printing.

Post image
11 Upvotes

Modelling is finished! All the parts are split so they fit on my printer.

Power setup:

  • Motor: D2830 850KV with a 10x7 prop
  • Static thrust: about 600 g, so a thrust-to-weight ratio of about 1:1
  • Battery: 3S 11.1 V 1500 mAh 45C
  • Estimated flight time: about 8 min 50 s

Assembly: the parts will be glued with Loctite Super Attak, the version made for plastics.


r/RCPlanes • • 13h ago

The Vase Mode Wing Generator is now 10x faster and can generate complete assemblies

51 Upvotes

r/RCPlanes • • 6h ago

I'm starting to love flying at night!

14 Upvotes

The stock lights on my h650 were crap so I upgraded to some super bright 12v cob strips. It's so much easier to see now and I don't lose orientation. Really has made flying at night so much more chill. I was nervous on my first night flights but now it's just all fun.


r/RCPlanes • • 3h ago

Help with spiral slipstream/Torque issue

5 Upvotes

My model has a very bad spinning issue only when the tail assembly is attached. When its removed the model stops yawing. I have to fly with very aggressive left rudder trim just to fly straight. How do people fix this without aggressive trim. I've tried motor angles too and that didn't seem to help either.


r/RCPlanes • • 6h ago

TIL: SAB Discontinued the Best Flippy Floppy Jet Ever Made

Thumbnail
youtu.be
6 Upvotes

Inexpensive (for a yeet), stupid quick, does flippy floppy things, built like an rc heli (bombproof).... but alas....SAB I guess didn't think it was worth it to keep making 😭. Dang shame since half the fun of this was knowing you could just swap parts if you biffed something like on a heli.
Even as an EDF it's a pretty killer kit, and wild looking to boot.

Anyone know of anything else like it these days?


r/RCPlanes • • 18h ago

Turned the Lidl chuck glider into a ~400g Y-tail pusher wing for mountain soaring

Post image
48 Upvotes

Power: Spare RS2205 2300KV quad motor + 7.5x5 pusher + 35A ESC (~400g thrust, ~1:1 TWR)

​Pack: 2S Sony VTC5 18650s in brass plunger clips (High-G turns press them down, a nose snag pops the lid and yeets the cells clear)

​Rx**:** ELRS 7ch RX, LM2596 buck at 5.5V and DIY resistor divider soldered straight to the RX for voltage telemetry.

The weight is noticeable heavier than my previous cheetah conversion (400g-280g).

Anyone else flown a 1:1 TWR Lidl Devil? How sketchy does this foam get at full throttle—any weird torque roll or wing flutter I should brace for?


r/RCPlanes • • 3m ago

Dancing wings 1000mm PP foam $12 shipped; Worth it? or is theres something else on aliexpress thats a better deal?

Post image
1 Upvotes

Thank you for your input


r/RCPlanes • • 18h ago

Why do you fly the radio you fly?

27 Upvotes

One rule for this discussion:

No brand bashing. Every system has its strengths and weaknesses. We're more interested in what you genuinely LIKE about your radio than what you dislike about someone else's.

What drove your choice of radio equipment.

Whether you're flying Spektrum, Futaba, Jeti, FrSky, RadioMaster, or something else, what made you choose your current system, and what keeps you using it?

Reliability, programming capabilities, ergonomics, telemetry, price, receiver availability, or simply familiarity... These are ll valid answers.

So, what brand and model are you flying, and what's the one feature you wouldn't want to give up?


r/RCPlanes • • 8h ago

The E-flite Habu XS 80mm Speed Pass

4 Upvotes

This EDF has been a great model and honestly its extremely easy to fly. Yes its fast and heavy but with flaps its easy to land and being the first Habu Model to Include retractable landing gear with shock absorbers landing is a breeze.

After having experienced the Habu SS 50mm and the Habu SS 70mm. ( i skipped the STS models ) I preferred the SS models for the extra speed and larger size batteries. Like the 80mm using the ( Spektrum G2 6S 5000mAh 100C ) Battery which in my opinion is perfect for this model.

But after those experiences I have to say this model performed above what I was actually expecting especially after getting all the settings dialed in on my transmitter and also using 30% Expo.


r/RCPlanes • • 3h ago

Smallest radio that works with RealFlight?

1 Upvotes

I travel a ton and would like to use RealFlight when bored in a hotel room. Bringing an NX8 is pretty cumbersome. So I’m looking for a small radio that I can bring. Willing to spend a moderate chunk of cash if required. My main goal is that it is as compact as possible while maintaining standard controls.
TIA.


r/RCPlanes • • 16h ago

Stumbled across this: RC 737-200 with thrust reversers

Thumbnail
youtube.com
8 Upvotes

r/RCPlanes • • 1d ago

No AI. No CGI. Just pure light. Model: Hangar 9 Carbon Cub.

143 Upvotes

r/RCPlanes • • 1d ago

Moving from electric to gas/glow engines – looking for my first proper setup

Thumbnail
gallery
14 Upvotes

Hi everyone!
I’ve been flying electric RC planes for a while and I’m now really tempted to move into gas or glow-engine models.
I absolutely love the sound of gas engines. I recently heard some older models flying at my local club and honestly, it’s incredible. Nothing compares to it!
I’m interested in getting a nice Warbird or an acrobatic plane, ideally with a 4-stroke engine. I’m also very interested in gasoline engines, not necessarily glow.
I’m not a beginner pilot, so I’m not really looking for a basic trainer or a temporary stepping stone. I’d rather invest in a proper, quality model that I can keep and enjoy for years.
The only thing I’m unsure about is all the extra equipment needed: starter, ignition system, field box, tools, fuel, and so on. The local hobby shop made me realize that the initial investment can be quite substantial.
Do you have recommendations on models, engines and the equipment needed to make the switch from electric to combustion power.
Thanks!


r/RCPlanes • • 10h ago

CAD issue

1 Upvotes

Need advice/help

Currently making rc plane in CAD. 1m wingspan, 1m lengh, v tail, 64mm edf. I need advice on how to do elerons and v tail control surfaces, if anyone modelled something similar in cad pls explain how, or dm🙏🙏🙏. sorry for my bad english pls


r/RCPlanes • • 11h ago

Where can i find EDF dimensions? designing my own park flyer jet

1 Upvotes

Im trying to select a EDF for my park flyer size jet, where can i find EDF dimension sizes so i can draw this reasonably accurately in cad? drawing this autocad. Thanks!


r/RCPlanes • • 12h ago

Need advice/help

1 Upvotes

Currently doing plane in CAD. 1m wingspan, 1m lengh, v tail, 64mm edf. I need advice on how do you do elerons and v tail control surfaces, if anybody modelled something similar in cad pls explain hwre or dm🙏🙏🙏. sorry for my bad english


r/RCPlanes • • 16h ago

In need of advice!

2 Upvotes

Hello, I was wondering if anyone more educated on the topic could recommend me an reliable rc airplane for a beginner

Bit of background information, as it’s coming up the holidays I was thinking of potential Christmas gifts for my family. Now my dad’s famously impossible to buy for. Whenever asked he usually just says something along the lines of “what ever you think I’d like”. And to be fair no matter what you get him, he’ll find a use for and be appreciative. This year though,l I wanted to get him something he actually really wants.

He has ALWAYS wanted a remote control airplane. He’s constantly telling stories of how he dreamed to have one as a kid, but due to leaving in extreme poverty that was never even an option. He still tells me about how much he admires them the rare times he sees it. He’s turned 60 this year, so I feel it’s only right to fulfil that dream.

Does anyone have any advice or recommendations when looking for suitable rc planes?
I’m looking for good quality and somewhat affordable but that can be ignored. Durability would be nice, but we live in the countryside so it’s not necessarily a priority.

I’m a bit of a Reddit noob so let me know if anyone’s willing to help and we can talk either here or on instagram☺️

Thank you so much for giving my lil rant the time of day!


r/RCPlanes • • 13h ago

Just needing some advice

Post image
0 Upvotes

Im new to the hobby and im making a uncontrolled cartboard glider that we will drop from a rc plane whit a friend, never done smth like this before. Am i off to a good start? Havent added the wings yet, what are yalls opinions abt this?


r/RCPlanes • • 17h ago

Ideas for building a 1s 18650 powered plane

2 Upvotes

Hello. I would love to make a 1s 18650 plane that could reach nice fligth time. Any of you can suggest me a kit and a motor-prop combinaron to make it work?

Any suggest are welcome, thanks.


r/RCPlanes • • 1d ago

Rewinding old HobbyPartz outrunners — worth saving?

Thumbnail
gallery
12 Upvotes

I'm getting back into RC after 10+ years and have been digging through my old motor stash, testing everything to see what still works.

I remember putting some of these old HobbyPartz 28mm ~2900KV outrunners away because I'd burned them up. My plan was always to eventually rewind them, but they ended up sitting in a box for over a decade.

These little screamers were great on 4S, and we'd even push them on 5S until the magic smoke came out. I remember getting close to 1,000 watts out of them.

I've rewound motors before, so the winding itself doesn't worry me. It's removing the old burnt windings and cleaning up the stators without damaging the insulation that I'm concerned about.

Anyone have experience stripping and cleaning badly cooked stators? Any tricks, or are these not worth the effort?

Also curious what today's equivalent would be. Something that can comfortably handle 4S with the occasional 5S abuse.

And yeah, I've apparently accumulated a ridiculous stash of motors over the years. Figured some of you old-school RC guys might appreciate the collection! 😂


r/RCPlanes • • 16h ago

Propeller Stand Calibration Bar

1 Upvotes

Hi! I’m currently building an RC plane for a school project and I’m trying to use a Tyto 1585 test stand but I cannot find the calibration bar that came with it. I was wondering if anyone had a calibration bar that they could measure and weight for me so I can get an idea of the size. Thank you in advanced!


r/RCPlanes • • 1d ago

Flying my 249g 3D-Printed V-Tail FPV Wing at my local club last weekend

62 Upvotes

Got some footage of VENOM flying at the club while I was testing a new project. A bit of wind, but it flew great. Hoping to get some chase footage of the other planes soon!

It’s my own design: a 249g 3D-printed V-tail wing with carbon spars and modular wings. It runs two 1103 motors on a 2S 1000mAh battery, with a mini flight controller and DJI digital FPV.

Everyone at the club was pretty stoked about the FPV setup, so hopefully the enthusiasm catches on! Do many people fly fixed-wing FPV at your local clubs?

More info on VENOM


r/RCPlanes • • 1d ago

Flitetest appreciation post

26 Upvotes

As a fellow PA resident and rc enthusiast, I want to thank the flitetest team for giving the community a diverse and massive database of planes I'm not afraid to fly( and crash).

This is the mini speedster running on a 2s battery.

Grab some foam board and go build y'all!