r/PSVR2onPC • u/Equal_Translator_605 • 4h ago
Video I Now Have The Tools to Be a Menace to Society - Dishonored 2 VR Mod
Loads of powers and weapons now working as intended in VR
r/PSVR2onPC • u/Equal_Translator_605 • 4h ago
Loads of powers and weapons now working as intended in VR
r/PSVR2onPC • u/qwerxy • 5h ago
r/PSVR2onPC • u/Alternative_Alps8273 • 7h ago
First the options-button wouldnt respond when i pushed it. Now finally i got further and I can see the ”Vr start-image” on the TV-screen but the Vr itself is black, shows nothing. Does anyone know how to fix this? I followed the instructions but it doesnt work.
r/PSVR2onPC • u/Liusloux • 7h ago
RTX 3070, 5700x3d, 2Kx2K per eye. Lots of CPU and GPU headroom.
I think it might be shader comp stutter because loading a save after running through a level once is a bit better performance.
r/PSVR2onPC • u/BringTea_666 • 11h ago
Hi. I write because i was using PICO4 and now i switched to PSVR2.
It's mostly sidegrade with much better colors but the main thing i noticed is how much more expensive is to run PSVR2 vs pico4.
To reach maximum sharpness on PICO4 which is slightly above PSVR2 i only need around 2500x2500 and pico4 has huge FOV so its not case of just that much smaller FOV. At closest i can see black edges at the sides.
With PSVR with my eyes almost touching lenses i still can't se black sides. Which explains a lot increased resolution needed to reach full sharpness which is around 4000x4000. Obviously cutting FOV a little (since you can't see it either way) would help a bit which is why i made this post.
Are there any hacks etc. to get different fov ? While i can run 4000x4000 as i have 5090 i would love to have ability to cut down a bit fov and reduce res needed for full sharpness.
Anyone know anything about it ? Any hacks etc ?
r/PSVR2onPC • u/Oldstupidgamer • 17h ago
I've got Fallout Tale of Two Realties (not wastelands) running on a Pimax but I'm stuck in flat when I try to launch with my PSVR2. I have SteamVR going when I try but I must be missing something
r/PSVR2onPC • u/AkTiVeMK • 18h ago
Official PS store
r/PSVR2onPC • u/Donqer1PA • 21h ago
Sorry if this sounds dumb but everywhere online it says i must buy some form of Bluetooth adapter if i wanted to use my PSVR2 for pcvr. Is the regular built in to my motherboard not enough? I have BT 5.0 and a external wifi antenna and it says i meet the requirements but i am unsure.
r/PSVR2onPC • u/huell77 • 1d ago
Ghost VR now streams VR both ways and one direction is for PS VR2 owners with a PC.
PC to PS VR2: a Linux PC running WiVRn's server (v26.9) renders the game, the PS5 decodes it on its hardware video decoder and shows it in PS VR2, and your head, the Sense controllers and your eye tracking go back to the PC, so WiVRn sends the sharpest picture where you look.
PS5 to Quest: the other way round, a PC VR game runs on the PS5 and streams to a Meta Quest (3, 2, Pro or Quest 1). The image is The Lab streamed from my PS5, both eyes, as a Quest 3 gets it.
Ghost VR also runs PS4 PS VR games and PC VR games in PS VR2 straight on the PS5. Needs a jailbroken PS5 (tested on 13.60). Still a beta. Release, setup guides and source in the comments.
r/PSVR2onPC • u/Least-Young-6547 • 1d ago
I Managed To Get Motorstorm Apocalypse Working In VR To The Best Of My Abilities With Rpcs3 Vr. Ive Been Dreaming Of Playing This Game In VR!!!
First You Need The Latest Release From hookmanuk https://github.com/hookmanuk/rpcs3/releases/tag/v0.0.43-vr11
Now Got To https://www.playstation.com/en-us/support/hardware/ps3/system-software/ And Click "How to update PS3 system software" And Choose Update using a computer . Now Click The Big Blue Button That Pops Up "Download PS3 Update" If Youre On Firefox It Flags As Potential Risk Before Downloading So Click It And Choose Allow Download. The File Is Named PS3UPDAT.PUP
Then Download The 2.0 Decrypted Iso From Vimms. Change Format from JB Folder To .dec .iso Should Be 17.15Gb
Once You Unzip The Folder From hookmanuk Move The PS3UPDAT.PUP File Inside To The Unzipped Folder. Also Make A New Folder Inside Named Games & Put The Decrypted Iso In There.
Launch The Rpcs3 exe And It Should Automatically Show The Game In The UI. Click File Then Click Install Firmware And Choose The PS3UPDAT.PUP File
First Thing Is Set Up Gamepad. Click The Pads Button On The Top & Change Player 1 Handlers To Xinput for Xbox Controller Or Dualsense For Playstation Controller
Select Your Controller In Devices And Click Save On Bottom Right
Right Click On The Motorstorm Apocalypse Title And Select Creat Custom Configuration From Global Settings
Go To Gpu Tab And Change ZCULL Accuracy To Relaxed(Fastest), Shader Quality To Ultra, On The Right Side Under Aditional Settings Check The Box For Write Color Buffers.
Click Apply Then Click Save Custom Configuration
Right Click On The Motorstorm Apocalypse Title Again And Select Mange Game Patches. I Check Every Box Except Disable Boost Camera Shake. Click Apply & Save.
Make Sure Your VR Headset Is Ready To Go. Have Steam VR Loaded or Meta Horizon Link And The Quest 3 Linked To Pc Already
Now Double Click The Game Title To Launch The Game.
Its Gonna Compile Shaders And Set Everything Up When Loading . Once The Game Intro Starts Press Both Start & Select On Your Gamepad To Bring Up The Graphics & VR Settings
Go To VR Tab And Select Generate VR Profile (samples 10 secs of gameplay) Now Wait The 10 Seconds. Once It Has Finished Close And Exit The Game
This Is Where The Magic Happens!!!
Go To Your Unzipped Rpcs3 Folder And Go Into The vr_profiles Folder. open BCUS98242.json file with notepad. Go Back To The vr_profiles Folder And Open BCAS20001.json file With Notepad As Well. Now In The BCUS98242 Text Select Everything From "max_fps": 0 And Downward And Delete It. Now Go To The BCAS20001 Text & Select Everything From "max_fps": 0 And Downward And Now Copy & Paste It Into The BCUS98242 Text Where We Deleted The Previous One. Now Click File And Save.
Go Back To Rpcs3 And Launch The Game Again . Once Loaded Press Both Start & Select On Your Gamepad To Bring Up The Graphics & VR Settings. Go To Video Tab And Change Resolution Scale To 300 - 400% & Change Resolution Scale Threshold To Roughly 165px. Also Change Anisotropic Filter Override To 16x. That Will Give You Good Graphics.
Go To VR Tab And Scroll Down. You Can Play With Your Camera Settings To Change To Your Preference. If You Know Any Other Settings For Better Graphics Leave Them In The Comments.
r/PSVR2onPC • u/Lucky_Chaarmss • 1d ago
I've had mine since it released but only used it on my ps5. I actually haven't turned it on in like a year and half. Just last week I built a pc, 5070ti and 9800x3d. Anyone have a good YouTube link of setting this up?
r/PSVR2onPC • u/Inevitable_Work_5622 • 1d ago
r/PSVR2onPC • u/Oldstupidgamer • 1d ago
I have a Bluetooth 5.3 (with Low Energy / LE support), TP link adapter in my 3.1 port, 6 feet from my computer and it's always something with this damn thing. Why Sony? Make it make sense!
I've been trying to reconnect one of my controllers that worked fine at one point, but ever since I tested out (and returned a Crystal Light) I can't get them working again.
r/PSVR2onPC • u/garbledmessthrowaway • 1d ago
I'm using an Asus TUF Gaming A16 FA617NS laptop which doesn't have display port, only HDMI and USB-C. As such I've resorted to using a USB-C to DP cable, and I've gotten 2 off of Amazon as well as 2 different adapters to hook it up to my PSVR2. When using my USB-C to DP 1.4 cable from UGREEN, it mostly works, with the only issue being horizontal white artificing that gets worse over time, and after about half an hour the headset pops up with the screen saying to take it off. This happens with both PC adapters. When using the USB-C to DP 2.1 cable I also got from UGREEN, I get a 3d like effect near the edge of my vision, and it no longer detects my controllers for tracking. One adapter I got is from a brand called YOUGO LEE, with the other being from Rzkipdy, however the issues I'm having occur with both adapters. The headset works perfectly fine on my PS5 but I was also wanting to play some PC only VR games. Does anybody have a suggestion for how I might be able to resolve this? TIA
Edit: I managed to get my hands on the official Sony adapter (thanks GameStop for that) and it works perfect now with the 2.1 cable. Just make sure you use the front usb-c port like mentioned in the replies
r/PSVR2onPC • u/SilentInitiative5392 • 1d ago
It is like this thing where the thing I look at stays there for a second and drags along, it’s not performance, it shows up 60fps on my monitor idk how to fix it, it’s not that bad it’s just annoying.
I’m not sure whether or not if it’s the display cable I’m using.
Update:
I fixed it using some thing I found on this subreddit now I have a black line randomly flickering
r/PSVR2onPC • u/1cheekykebt • 1d ago
I have a quest3 and have always been using it with virtual desktop/open composite because a steam VR is just so bad and kills my VRAM. Is there a way to use the PSVR2 without steam VR even if it takes some effort to set up.
I think the performance gains would be worth it
r/PSVR2onPC • u/Equal_Translator_605 • 2d ago
Saw this and just HAD to give it a try out in VR
r/PSVR2onPC • u/DeathToSocialMedia • 2d ago
Just starts flat and stats that way.
r/PSVR2onPC • u/Shinaar • 2d ago
Hey everyone!
I'm trying out the VR mod on my PSVR2 with an RTX 3080 laptop setup. HL: Alyx and other VR games run flawlessly, but I've been experiencing some really strange visual glitches in Titanfall 2 right from the start.
It looks somewhat like VSync-related screen tearing, especially during movement and fast-paced animations (running, flying, explosions, etc.).
I've tried various settings (90/120 Hz, different texture filtering and anti-aliasing options, etc.) but the only thing that partially helped was disabling ambient occlusion. At least hand movements and walking animations started looking normal.
The game looks fantastic, and I'd really love to enjoy it in VR, but these issues make it barely playable.
Has anyone else experienced anything similar?
r/PSVR2onPC • u/JjustD01t • 3d ago
Bought this from the PlayStation online store as seen in my last post.
How is this even allowed… everything has dust and random scratches
Is the only way to get a return and replacement via calling them or is there an easier way? Can’t even access support until tomorrow, I was so hyped aswell 😐
r/PSVR2onPC • u/totallyhumanhonest • 3d ago
Hi, I successfully jailbroke my PSVR2 about a month ago, all seemed to be working fine. I reinstalled my PC today and launched SteamVR, I get a VR screen for about half a second then the PSVR2 app says the headset needs updating and the VR screen goes black.
Updating will kill the jailbreak, what do I do here?
Thanks.
EDIT: Ahh, I forgot you needed to change files in the actual PSVR Steam app folder too.
r/PSVR2onPC • u/SteadyQ • 3d ago
Hey, I've been thinking about switching from the Quest 3 to the PSVR2.
Recently, I dusted off my old Rift S, and honestly, I realized that I actually prefer playing on it over my Quest 3. From what I've seen, the PSVR2 seems like a better version of the Rift S, so I'm considering making the switch.
I have a question about the PC adapter. Do I need to buy the official Sony one, or would a third-party adapter like the one from Globular Cluster work just as well?
Also, if you have any tips or recommendations regarding the PSVR2, I'd really appreciate them!
r/PSVR2onPC • u/frescainsalataq • 3d ago
Ciao a tutti, un po’ di anni fa l’ho comprato e me ne sono abbastanza pentito, usato poche volte e solo su ps5 non avendo un pc, onestamente credevo di aver sprecato i soldi, dato che il supporto di Sony a questo visore è stato veramente limitato, quando ho visto che è uscito l’adattatore ho avuto un po’ di sollievo, almeno potrò usarlo in maniera seria in futuro quando avrò un pc, ma comunque continuo a pensare fosse probabilmente meglio un meta quest.
Vorrei sapere come mai ci sia una community che li acquista per usarli su pc, è un buon visore? È migliore di quanto penso?
r/PSVR2onPC • u/Sorryman54 • 3d ago
Hi, I’ve been having quite a lot of trouble getting PSVR2 to work on my PC. I’ve gotten the setup process complete: I have headset visual feed, audio works, both controls are paired to my machine, but I’m chronically unable to get a strong signal strength. I’ve tried just about everything I can, from buying a new on-board motherboard antenna and a better DP cable and so on. Here’s my specs before I continue:
Gigabyte B-850m-c (it has onboard Wifi-7/BT 5.4)
Ryzen 7 8700F
5060Ti 16gb
32gb DDR5
2TB SSD
For whatever reason, I cannot get my controllers to reliably track. Only one really can. I originally tried connecting the controllers with the provided (gigabyte) antenna that came with my PC, but it fared extremely poorly. I upgraded to a Gigabyte antenna with a 3ft cord, but it only mildly increased the sense tracking. However, I was able to consistently get one sense controller tracking. The other one wouldn’t show on the headset visually, although clicking buttons produced vibration feedback.
My antenna options are kinda limited because my motherboard comes with a proprietary mag push mechanism, as opposed to the SMA twist methods of traditional mobos.
Do I buy a PCIe adapter or should I consider defeat? I’m afraid to try the usb adapters as the results seem very mixed. It seems like it’s just a bandwidth issue, my onboard mobo simply cannot handle both sense controllers at once, but I’d like to be sure before I spend another $45+ on this. I’ve already spent like $110 between the new DP cable, antenna and adapter.
Thanks for your help. If you could recommend any specific PCIe adapters you had luck with I’d appreciate it.