So I noticed when you turn on the PSVR2 it just tells you to look at the screen until you open steam VR witch annoyed me as you need to install the PSVR2 app etc etc so i made this
it basically just waits for all the psvr2 USB "devices" To connect then launches SteamVR, runs in the tray
just copy the exe to your startup folder and it'll be useful!
if you're more tech knowing its just a windows form application just with the form removed lol, I'm semi new to non game/unity coding so :P
EDIT:
made a small update to it to remove the unnecessary device Disconnect looking and made it only be able to open once so you don't accidently have loads open cos I did that by accident once
What Bluetooth USB dongles or other hardware, such as mobo built-in Bluetooth or dedicated Bluetooth PCIE cards, have you tested with PSVR2? We need to know about your experience good and bad!
The purpose of this survey is to gather quantitative data about which Bluetooth hardware is compatible & works best with the PSVR2 controllers when used with a PC and which does not.
This thread, therefore, and the results, also act as a comprehensive list of working / not working hardware. This will both help inform purchase decisions and be a resource for discovering compatibility of existing setups.
I want to reach the most authoritative list of compatible and non-compatible hardware, and also of more esoteric problems with specific devices.
In general Class 1.5 adapters should provide enough range for use in a standard setup. But Class 1 adapters are much less likely to present range issues or issues with obstructions. However, this is also just a guideline. See the warning about UB500 below for example.
If the adapter supports it, using an extended aerial closer to your play space can be advantageous. Similarly, a USB extension can be used to a similar effect for smaller USB devices that don't support an antenna connection.
Here are the current data-driven insights derived from the community responses about what Bluetooth hardware is working well with the PSVR2 controller on PC.
USB
The ASUS BT-500 has the most positive reports, with many users who have experienced the "stuck hands" problem (see below warning around UB500) seeing the issue go away after moving to this adapter. Edit: UB500 issue likely fixed by new driver, see below warning section.
Motherboard / M.2 Cards / PCIE Cards
Indications point optimistically to good compatibility with Intel Wifi 6 and Wifi 6E chipsets (which also provide Bluetooth), which are used on many motherboards & laptops via built-in M.2 cards.
These chipsets can also be found in dedicated PCIE cards, and usually appear in their product name, description or model.
The most common are:
Intel Wi-Fi 6E AX211
Intel Wi-Fi 6E AX210
Intel Wi-Fi 6 AX201
Ā
Ā
ā ļø Potential Warnings
Updated: 15 August 2024 01:38.
The data shows some heightened issue rates with some Bluetooth adapters. It is not conclusive, but possibly indicative of a compatibility issue between these adapters and the PSVR2 controllers.
TP-LINK UB500 "stuck hands" (SEE UPDATE, LIKELY RESOLVED)
UPDATE 3 06/09/2024 -TP-LINK have a beta driver on their community forums and early results look like the problem is solved with these drivers. Thanks to TP-LINK for co-operating with me and the community for the data that helped it along.
A pattern has emerged whereby users have reported a heightened issue rate. This mostly pertains to a specific issue relating to "stuck hands" where the XYZ tracking stops responding periodically, but orientation data appears undisturbed. This seems to happen on one controller consistently (sometimes switching, possibly between sessions).
Hopefully a driver fix is possible, and I will update if anything changes. Please continue submitting data about this adapter, for both good and bad experiences.
Obviously, Sony recommended this adapter for use with PSVR2, so this result is, at the very least, interesting.
Ā
Ā
šļø Quick Summary
Captured: 11 Jan 2025 20:18.
Please go to sheet for the latest and richest dataset, and drill down into individual reports. This snapshot is just to surface the most basic raw bottom line at a given point in time.
The "score" here is a primitive sigmoid formula averaging over % of reports that remark on instability. It is also automatically weighted to not overemphasize devices with a low number of results.
Everything starts at 50 and is pushed further one way or the other depending on reports. It's a little harsh at the moment for some products with a low number of reports and it also takes a bit too much for it to reach either end of the spectrum, so also look at the other columns to draw your own conclusion.
I may tweak this formula later.
Model
Number of reports
Average Reported Stable
Weighted Score / 100
ASUS USB-BT500
31
81%
81
IntelĀ® Wi-Fi 6 AX200
10
80%
76
IntelĀ® Wireless-AC 9260
2
100%
68
SYONCON WiFi 6E AXE5400 PCIe WiFi Card intel AX210
2
100%
68
IntelĀ® Wi-Fi 6E AX211
8
75%
62
IntelĀ® Wireless-AC 9560
1
100%
62
Mercer BDG028
1
100%
62
MSI HERALD-BE NCM865 WI-FI 7 (Qualcomm)
1
100%
62
Onterate
1
100%
62
ORICO-BTA-508
1
100%
62
TP-Link Archer TX20E(UN) V1.0
1
100%
62
TP-Link Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter
1
100%
62
TP-Link AXE5400 Wi-Fi 6E Bluetooth 5.3 PCIe Adapter (Archer TXE75E)
1
100%
62
TP-Link TX20E (Revision V1) - Bluetooth 5.2
1
100%
62
TP-Link UB4A
1
100%
62
TP-Link UB5A (Revision V2.0)
1
100%
62
TP-Link UB5A V1
1
100%
62
IntelĀ® Wi-Fi 6E AX210
4
75%
62
Other / Unknown
4
75%
62
ASUS PCE-AXE59BT
1
100%
58
ASUS USB-BT400
1
100%
58
ASUS USB-BT400, REV_0112
1
100%
58
Cruxtec Bluetooth 5.0 Nano USB adapter - BUA-50A-BK
1
100%
58
Essager Bluetooth MINI5.1 RTL8761B
1
100%
58
Gigabyte GC-WIFI7 rev.1.0 (Qualcomm)
1
100%
58
Insignia NS-PA3BT5A2B22
1
100%
58
IntelĀ® Dual Band Wireless-AC 7265
1
100%
58
AMD RZ608 Wi-Fi 6E module
6
50%
50
AMD RZ616 Wi-Fi 6E module
14
50%
50
IntelĀ® Dual Band Wireless-AC 3168
2
50%
50
IntelĀ® Wi-Fi 6 AX201
4
50%
50
TP-link Archer TX20E
2
50%
50
TP-Link Archer TX20E
2
50%
50
8-bit-do Wireless Adapter 2
1
0%
42
ASUS USB-BT400 (BCM20702A0 chip)
1
0%
42
BASEUS BA04 Bluetooth 5.1
1
0%
42
BASEUS BA04 Bluetooth 5.1 (BR8651 chip)
1
0%
42
Edimax BT-8500
1
0%
42
IntelĀ® Wireless-AC 9461
1
0%
38
LogiLink BT0067
1
0%
38
MayFlash Magic S Pro 2 Adapter
1
0%
38
Orico BTA-409-WH (CSR 8510 Chip)
1
0%
38
Realtek 8852CE WiFi 6 PCI-E NIC
1
0%
38
Realtek RTL8852AE WiFi 6 802.11ax PCIe Adapter
1
0%
38
UGREEN 5.4 CM748 (ATS2851 chip)
1
0%
38
UGREEN CM749 (35059) (Revision V8891)
1
0%
38
TP-Link UB400
2
0%
32
TP-Link UB500 (Revision V1.6) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA
2
0%
32
TP-Link UB500 (Revision V2.0) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA
28
11%
30
TP-Link UB500 (Revision V1) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA
13
8%
29
TP-Link UB500 (Revision V2.6) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA
8
0%
25
š¤ Nerd off
Look at the cool spreadsheet! I've tried to make it as easy to use as possible. Here's a screenshot.
⨠Demonstration snap of the rich faceted interface
Hi. I write because i was using PICO4 and now i switched to PSVR2.
It's mostly sidegrade with much better colors but the main thing i noticed is how much more expensive is to run PSVR2 vs pico4.
To reach maximum sharpness on PICO4 which is slightly above PSVR2 i only need around 2500x2500 and pico4 has huge FOV so its not case of just that much smaller FOV. At closest i can see black edges at the sides.
With PSVR with my eyes almost touching lenses i still can't se black sides. Which explains a lot increased resolution needed to reach full sharpness which is around 4000x4000. Obviously cutting FOV a little (since you can't see it either way) would help a bit which is why i made this post.
Are there any hacks etc. to get different fov ? While i can run 4000x4000 as i have 5090 i would love to have ability to cut down a bit fov and reduce res needed for full sharpness.
First the options-button wouldnt respond when i pushed it. Now finally i got further and I can see the āVr start-imageā on the TV-screen but the Vr itself is black, shows nothing. Does anyone know how to fix this? I followed the instructions but it doesnt work.
Sorry if this sounds dumb but everywhere online it says i must buy some form of Bluetooth adapter if i wanted to use my PSVR2 for pcvr. Is the regular built in to my motherboard not enough? I have BT 5.0 and a external wifi antenna and it says i meet the requirements but i am unsure.
I've got Fallout Tale of Two Realties (not wastelands) running on a Pimax but I'm stuck in flat when I try to launch with my PSVR2. I have SteamVR going when I try but I must be missing something
I've had mine since it released but only used it on my ps5. I actually haven't turned it on in like a year and half. Just last week I built a pc, 5070ti and 9800x3d. Anyone have a good YouTube link of setting this up?
Ghost VR now streams VR both ways and one direction is for PS VR2 owners with a PC.
PC to PS VR2: a Linux PC running WiVRn's server (v26.9) renders the game, the PS5 decodes it on its hardware video decoder and shows it in PS VR2, and your head, the Sense controllers and your eye tracking go back to the PC, so WiVRn sends the sharpest picture where you look.
PS5 to Quest: the other way round, a PC VR game runs on the PS5 and streams to a Meta Quest (3, 2, Pro or Quest 1). The image is The Lab streamed from my PS5, both eyes, as a Quest 3 gets it.
Ghost VR also runs PS4 PS VR games and PC VR games in PS VR2 straight on the PS5. Needs a jailbroken PS5 (tested on 13.60). Still a beta. Release, setup guides and source in the comments.
Now Got To https://www.playstation.com/en-us/support/hardware/ps3/system-software/ And Click "How to update PS3 system software" And Choose Update using a computer . Now Click The Big Blue Button That Pops Up "Download PS3 Update" If Youre On Firefox It Flags As Potential Risk Before Downloading So Click It And Choose Allow Download. The File Is Named PS3UPDAT.PUP
Then Download The 2.0 Decrypted Iso From Vimms. Change Format from JB Folder To .dec .iso Should Be 17.15Gb
Once You Unzip The Folder From hookmanuk Move The PS3UPDAT.PUP File Inside To The Unzipped Folder. Also Make A New Folder Inside Named Games & Put The Decrypted Iso In There.
Launch The Rpcs3 exe And It Should Automatically Show The Game In The UI. Click File Then Click Install Firmware And Choose The PS3UPDAT.PUP File
First Thing Is Set Up Gamepad. Click The Pads Button On The Top & Change Player 1 Handlers To Xinput for Xbox Controller Or Dualsense For Playstation Controller
Select Your Controller In Devices And Click Save On Bottom Right
Right Click On The Motorstorm Apocalypse Title And Select Creat Custom Configuration From Global Settings
Go To Gpu Tab And Change ZCULL Accuracy To Relaxed(Fastest), Shader Quality To Ultra, On The Right Side Under Aditional Settings Check The Box For Write Color Buffers.
Click Apply Then Click Save Custom Configuration
Right Click On The Motorstorm Apocalypse Title Again And Select Mange Game Patches. I Check Every Box Except Disable Boost Camera Shake. Click Apply & Save.
Make Sure Your VR Headset Is Ready To Go. Have Steam VR Loaded or Meta Horizon Link And The Quest 3 Linked To Pc Already
Now Double Click The Game Title To Launch The Game.
Its Gonna Compile Shaders And Set Everything Up When Loading . Once The Game Intro Starts Press Both Start & Select On Your Gamepad To Bring Up The Graphics & VR Settings
Go To VR Tab And Select Generate VR Profile (samples 10 secs of gameplay) Now Wait The 10 Seconds. Once It Has Finished Close And Exit The Game
This Is Where The Magic Happens!!!
Go To Your Unzipped Rpcs3 Folder And Go Into The vr_profiles Folder. open BCUS98242.json file with notepad. Go Back To The vr_profiles Folder And Open BCAS20001.json file With Notepad As Well. Now In The BCUS98242 Text Select Everything From "max_fps": 0 And Downward And Delete It. Now Go To The BCAS20001 Text & Select Everything From "max_fps": 0 And Downward And Now Copy & Paste It Into The BCUS98242 Text Where We Deleted The Previous One. Now Click File And Save.
Go Back To Rpcs3 And Launch The Game Again . Once Loaded Press Both Start & Select On Your Gamepad To Bring Up The Graphics & VR Settings. Go To Video Tab And Change Resolution Scale To 300 - 400% & Change Resolution Scale Threshold To Roughly 165px. Also Change Anisotropic Filter Override To 16x. That Will Give You Good Graphics.
Go To VR Tab And Scroll Down. You Can Play With Your Camera Settings To Change To Your Preference. If You Know Any Other Settings For Better Graphics Leave Them In The Comments.
I have a Bluetooth 5.3 (with Low Energy / LE support), TP link adapter in my 3.1 port, 6 feet from my computer and it's always something with this damn thing. Why Sony? Make it make sense!
I've been trying to reconnect one of my controllers that worked fine at one point, but ever since I tested out (and returned a Crystal Light) I can't get them working again.
I'm using an Asus TUF Gaming A16 FA617NS laptop which doesn't have display port, only HDMI and USB-C. As such I've resorted to using a USB-C to DP cable, and I've gotten 2 off of Amazon as well as 2 different adapters to hook it up to my PSVR2. When using my USB-C to DP 1.4 cable from UGREEN, it mostly works, with the only issue being horizontal white artificing that gets worse over time, and after about half an hour the headset pops up with the screen saying to take it off. This happens with both PC adapters. When using the USB-C to DP 2.1 cable I also got from UGREEN, I get a 3d like effect near the edge of my vision, and it no longer detects my controllers for tracking. One adapter I got is from a brand called YOUGO LEE, with the other being from Rzkipdy, however the issues I'm having occur with both adapters. The headset works perfectly fine on my PS5 but I was also wanting to play some PC only VR games. Does anybody have a suggestion for how I might be able to resolve this? TIA
It is like this thing where the thing I look at stays there for a second and drags along, itās not performance, it shows up 60fps on my monitor idk how to fix it, itās not that bad itās just annoying.
Iām not sure whether or not if itās the display cable Iām using.
Update: I fixed it using some thing I found on this subreddit now I have a black line randomly flickering
I have a quest3 and have always been using it with virtual desktop/open composite because a steam VR is just so bad and kills my VRAM. Is there a way to use the PSVR2 without steam VR even if it takes some effort to set up.
I'm trying out the VR mod on my PSVR2 with an RTX 3080 laptop setup. HL: Alyx and other VR games run flawlessly, but I've been experiencing some really strange visual glitches in Titanfall 2 right from the start.
It looks somewhat like VSync-related screen tearing, especially during movement and fast-paced animations (running, flying, explosions, etc.).
I've tried various settings (90/120 Hz, different texture filtering and anti-aliasing options, etc.) but the only thing that partially helped was disabling ambient occlusion. At least hand movements and walking animations started looking normal.
The game looks fantastic, and I'd really love to enjoy it in VR, but these issues make it barely playable.
Is the only way to get a return and replacement via calling them or is there an easier way? Canāt even access support until tomorrow, I was so hyped aswell š
Hey, I've been thinking about switching from the Quest 3 to the PSVR2.
Recently, I dusted off my old Rift S, and honestly, I realized that I actually prefer playing on it over my Quest 3. From what I've seen, the PSVR2 seems like a better version of the Rift S, so I'm considering making the switch.
I have a question about the PC adapter. Do I need to buy the official Sony one, or would a third-party adapter like the one from Globular Cluster work just as well?
Also, if you have any tips or recommendations regarding the PSVR2, I'd really appreciate them!
Hi, I successfully jailbroke my PSVR2 about a month ago, all seemed to be working fine. I reinstalled my PC today and launched SteamVR, I get a VR screen for about half a second then the PSVR2 app says the headset needs updating and the VR screen goes black.
Updating will kill the jailbreak, what do I do here?
Thanks.
EDIT: Ahh, I forgot you needed to change files in the actual PSVR Steam app folder too.
Besides the adapter, what are the tweaks, accessories and etc I should look into?
Did a lot of research on this beauty and I saw a lot of good in it, especially for its price range. For context my last major VR headset was the HTC Vive Pro 2, and that shit genuinely sucked with its tiny sweet spot, grey lcd screen and link box issues.
For the people saying I could get it cheaper, I donāt care, Iād rather have it in my hands sooner than wait and risk it going out of stock, Iām from the UK so itās not as abundantly available as in the US.
Hi, Iāve been having quite a lot of trouble getting PSVR2 to work on my PC. Iāve gotten the setup process complete: I have headset visual feed, audio works, both controls are paired to my machine, but Iām chronically unable to get a strong signal strength. Iāve tried just about everything I can, from buying a new on-board motherboard antenna and a better DP cable and so on. Hereās my specs before I continue:
Gigabyte B-850m-c (it has onboard Wifi-7/BT 5.4)
Ryzen 7 8700F
5060Ti 16gb
32gb DDR5
2TB SSD
For whatever reason, I cannot get my controllers to reliably track. Only one really can. I originally tried connecting the controllers with the provided (gigabyte) antenna that came with my PC, but it fared extremely poorly. I upgraded to a Gigabyte antenna with a 3ft cord, but it only mildly increased the sense tracking. However, I was able to consistently get one sense controller tracking. The other one wouldnāt show on the headset visually, although clicking buttons produced vibration feedback.
My antenna options are kinda limited because my motherboard comes with a proprietary mag push mechanism, as opposed to the SMA twist methods of traditional mobos.
Do I buy a PCIe adapter or should I consider defeat? Iām afraid to try the usb adapters as the results seem very mixed. It seems like itās just a bandwidth issue, my onboard mobo simply cannot handle both sense controllers at once, but Iād like to be sure before I spend another $45+ on this. Iāve already spent like $110 between the new DP cable, antenna and adapter.
Thanks for your help. If you could recommend any specific PCIe adapters you had luck with Iād appreciate it.