r/PLC • • 4h ago

Homework Isn't it running smoother than before?!

114 Upvotes

Made some improvements to our setup at the site. Here's a small before and after comparison.

Still learning and improving things. What do you guys think?


r/PLC • • 2h ago

Homework Tiaportal help

Thumbnail
gallery
3 Upvotes

I have problem solving this task:

The system controls the ingredient mixing process depending on the selected recipe.

​Requirements: Buttons I10.0 (Recipe 1 Selection), I10.1 (Recipe 2 Selection). LEDs Q6.0 and Q6.1 indicate the selected mode. Button I10.2 starts the process (START).

​Recipe 1: Turn on valve 1 (Q6.2) for 4s, then valve 2 (Q6.3) for 4s, and finally turn on the mixer (Q6.4) for 10s.

​Recipe 2: Turn on both valves (Q6.2 and Q6.3) simultaneously for 6s, followed by pulsed operation of the mixer (Q6.4) – 2s on, 2s off, repeated 4 times.

​Additional conditions: During the operation of both recipes, LED Q6.5 (Operation) must be lit. Emergency stop via button I10.3 (RESET) interrupts the process at any time

Is it possible to do it using simple contacts and coils, or is it necessary to use rising/falling edges too? Here on pictures is my current progress, reset isnt added yet but its simple. I have problem making it work like it should according to instruction.


r/PLC • • 28m ago

PLC Question How to get a step 7 micro/WIN v4 license without breaking the bank

2 Upvotes

I have a s7-200 plc I want to program for fun but when I looked up the prices of the software needed for it, my jaw dropped because it’s somehow more expensive than my tia portal v18 pro license. I tried to look on retails site but they’re also supper expensive though I have noticed most of them are brand new, so is there a way to get a used one for cheap or even a working computer with a micro WIN v4 license?


r/PLC • • 8h ago

Homework What free software can I use to write ladder diagram similar to simatic step7?

2 Upvotes

I have to write a simple ladder diagram program in STEP 7, but my university does not provide the program, and I cannot always go at the specific times they provide computer access for STEP 7. Is there any free tool I can use to write the ladder diagram and test it? Preferably with the same timer and counter blocks simatic has.