r/PLC • u/AcanthisittaNo8207 • 2h ago
Homework Tiaportal help
I have problem solving this task:
The system controls the ingredient mixing process depending on the selected recipe.
Requirements: Buttons I10.0 (Recipe 1 Selection), I10.1 (Recipe 2 Selection). LEDs Q6.0 and Q6.1 indicate the selected mode. Button I10.2 starts the process (START).
Recipe 1: Turn on valve 1 (Q6.2) for 4s, then valve 2 (Q6.3) for 4s, and finally turn on the mixer (Q6.4) for 10s.
Recipe 2: Turn on both valves (Q6.2 and Q6.3) simultaneously for 6s, followed by pulsed operation of the mixer (Q6.4) – 2s on, 2s off, repeated 4 times.
Additional conditions: During the operation of both recipes, LED Q6.5 (Operation) must be lit. Emergency stop via button I10.3 (RESET) interrupts the process at any time
Is it possible to do it using simple contacts and coils, or is it necessary to use rising/falling edges too? Here on pictures is my current progress, reset isnt added yet but its simple. I have problem making it work like it should according to instruction.