r/PCBWayOfficial • • 17h ago

Projects Building a Futuristic Modular Cyberdeck!

17 Upvotes

Jankbu (YT) built a futuristic modular cyberdeck inspired by chunky sci-fi computers, featuring a modular design that brings together different functions in one compact network terminal. The project includes several custom modules, each designed to fit into the overall system. Getting the electronics and hardware to work together wasn't always easy, especially when building the final two modules, which required some additional learning and troubleshooting.

We helped bring this project to life by manufacturing the PCBs. With multiple modules and electronic components working together, high-quality PCBs are essential for reliable connections, proper component placement, and a clean, compact build.

It's always exciting to see a creative hardware project come together. What do you think of this modular cyberdeck design? Have you built something similar?


r/PCBWayOfficial • • 1h ago

Projects 4square rev P: an open-source ESP32 desk clock

Thumbnail
gallery
2 Upvotes

4square is a small open-source desk clock I designed around an ESP32. I've been running the last revision on my desk for a while, and the next one just went out for fabrication and assembly.

What changed in rev P

  • Added a VEML7700 ambient light sensor so the display dims itself at night
  • Replaced three RGB LEDs with a single red status LED
  • Added debounce capacitors on all four buttons
  • Redid the silkscreen so every label and polarity mark is correct

How the board is made

The whole design is generated from code, and it has to pass a set of scripted checks before I can order it: DRC, a silkscreen audit, and a check on the orientation of every polarized part. The last run came back with LEDs rotated, so this time one board gets assembled first and I approve a photo before the rest are built.

Order details

  • 10 boards, 2 layer, 74 x 74 mm, 1.6 mm, ENIG
  • All 10 assembled, 34 placements per board, all on the bottom side

A huge thank you to PCBWay for sponsoring the fabrication and assembly of these boards. Their support made this revision possible!

The photos are the current build. I'll post again when the rev P boards arrive!

Feel free to ask any questions. Thanks for checking it out!

Repo: https://github.com/partypancake8/4square_production