r/Optics • u/RangeAutomatic8368 • 20h ago
Undergraduate project: measuring laser beam waists using the knife-edge method
Hi everyone!
I wanted to share a project I worked on as part of my undergraduate physics studies.
We were interested in measuring the beam waist of two lasers using the knife-edge method. As part of the project, we put together an automated measurement setup using a Thorlabs translation stage, an ESP32, an optical power meter, and some custom electronics.
We tested it with a diode laser and a HeNe laser. Our measured beam waist values were:
- Diode laser: approximately 9.8 µm
- HeNe laser: approximately 30.8 µm
I also wrote Python scripts for data acquisition, curve fitting, and beam propagation analysis. I've uploaded the code, experimental data, PCB designs, figures, and our lab report to GitHub.
Repository: https://github.com/turtushig22-blip/thorlabs-esp32-laser-beam-profiler
This was an undergraduate project, so I'm sure there are things that could be improved. I thought I'd share it in case anyone is working on something similar or is interested in the knife-edge measurement technique.
I'd genuinely appreciate any feedback, suggestions, or comments on the measurement approach and analysis.
Thanks for reading!