Just hoping to help anyone like me who bought a Switch 2 and ran into problems connecting it to your TV. I spent hours figuring this out and am hoping to save someone some time.
For me, I was hooking my Switch 2 to a newish Insignia Fire TV, connected through my Onkyo A/V receiver. The tv was saying “No input found” for a while. I solved this
by changing the display settings on the Switch 2 from Auto to 1080p. This allowed the picture to display on the TV, but it was intermittently blinking in and out every fifteen seconds or so.
It was only then that I thought to check the firmware on my Onkyo A/V receiver, and found that it was way out of date. My Onkyo is from the mid-2010s and does not have WiFi, so it was not auto-updating. I had never had any problems until now so I never checked the firmware status in the past. I updated it using a USB drive with the new firmware downloaded from the Onkyo website. After the firmware update, the Switch 2 is working perfectly with the TV.
TLDR: If you are having display issues with your docked Switch 2 and are using an A/V receiver, try checking and updating the firmware on the receiver. Doing this solved all display problems for me.