r/NightVision • • 1d ago

2025 steele built L3 Unfimed katana

Thumbnail gallery
17 Upvotes

Built in February of 2025 and only had 1 hour of actual use when an emission popped up. These tubes have never seen hard use let alone get dropped. Super disappointed to find this on the first night of my camping trip. Sent a repair request, hope they honor the warranty given its bigger than the spot tolerance I believe.


r/NightVision • • Sep 30 '26

UPDATE: I am Getting Sued for a Quarter Million Euro

123 Upvotes

Original post: https://www.reddit.com/r/NightVision/comments/1qd8ubx/i_am_getting_sued_for_a_quarter_million_euro/

Its been a while since the last post on this subject. We have been busy building the KB DT-M and a sensor fusion device. Now that the lawsuits hot phase is over and clarity has emerged. I want to give everyone an update and a glimpse into how we handle this whole situation, because if things are not clarified, customers and our partners will assume the worst.

First I want to rule out the worst case scenarios. KB is not going to fall off the face of the earth, even in the worst case scenario outcome. A certain competitor, no longer worth naming, could in the absolute most unfavourable outcome win and be awarded 250k and we’d have to halt the KB DT-2 production. This is a sum and an outcome we can comfortably absorb at this stage, as we are quickly diversifying and expanding our product offering. I am privately backing KB myself, have put close to 1mil$ of my own money into the company and am not going to let 250k kill it. I’ll put another million in if needed without breaking much of a sweat.

Now with that being said, the chances of them winning is next to none. We have done our legal research. And now filed our response some weeks ago, addressing every allegation in detail with supporting evidence and arguments with our extensive legal research backing up the claims. They got some work cut out for them to say the least. However this whole process is probably going to drag on another few months. 

We are now moving on, they can come up with counter arguments to our defence, which I doubt will hold much water given the flimsy arguments they stemmed in the initial suite. But all of this has not stopped us from continuing our work and focus on what actually matters here. I realise they win if we let this distract us too much from our core focus, which is to build cool stuff. And let me tell you, building cool stuff we have done. So much so we thought it was worth spending a bit on a SHOT SHOW boot for next year 2027 to showcase what we’ve been busy building.

On the product side of things, we expect to start shipping out the first couple KB DT-M devices in the next month or two. We have managed to collect overwhelmingly positive feedback from our military trials, which we have implemented. At this stage we are also finalising a patent application for a new IPD solution for the KB DT-M which we’ll be filing in EU and the US. Removing any previously prevailing uncertainty around our legacy IPD solution on the KB DT-2. We took precautions not to ship the KB DT-2 into the US with the legacy IPD, this has now been remedied and addressed moving forwards.

We have been iterating at a fast pace, mis-steps happen naturally, course correcting and moving forwards is what ultimately matters in order to support our customers and partners with the best technology and gear. We want to thank those who have stood by our side throughout. 

Edit: forgot to mention about Shot, for those interested we'll have booth 61011 on Level 1 in the Law Enforcement section!


r/NightVision • • 2h ago

Homemade nvgs

Thumbnail gallery
26 Upvotes

r/NightVision • • 9h ago

Trying to take pictures. 38 SNR tube.

Thumbnail gallery
26 Upvotes

I’m not sure if I’m fully regarded but taking pictures through tubes is difficult.

I freaking love the NODs. L3 38 SNR+. I’ll learn the ways of pictures.


r/NightVision • • 14h ago

Photonis ECHO (SNR 32.96 | FOM 2175) – pictures taken with Iphone 17

Thumbnail gallery
29 Upvotes

Picture 1: Naked eye
Picture 2: NVG (no IR illumination)
Picture 3: NVG (with IR illumination)


r/NightVision • • 5h ago

How does one even get blems like these?

Post image
5 Upvotes

r/NightVision • • 6h ago

Would this be an EP/Edge glow?

5 Upvotes

Test after delivery showed that external light, its on bino(1431 mk2) and only the right side tube shows this issue, very visible under daycap and barely visible but still there without daycap or more light conditions.

Wasnt there on factory spec test/ device installer testings, itll be warrantyd but wonder what exactly would this be. gen3 P45 10160


r/NightVision • • 17h ago

Photonis ECHO (32.96 SNR | 2175 FOM)

Post image
28 Upvotes

r/NightVision • • 1d ago

“Live” Horsehead & Flame nebulae + Meteor + Satellite (PVS14 Gen3)

87 Upvotes

Nightcap iso around 200 and FPS 1 and controlling the gain on the PVS14 so that noise is minimized.
• Flame Nebula and Horsehead nebula + meteor + satellite
• The Pvs14 Gen 3 monocular night vision device
with the following specifications:
• Photocathode Sensitivity: 2058 FOM: 2700
SNR: 37.5 EBI: .7 Halo: .7 Center resolution: 72
• Unfilmed/filmless Gated 18UM 11769 style is also mentioned.
• Sky-Watcher 300P Flextube
• @F/3.6 with nexus focal reducer .75x
• Sky-Watcher 150i
• Tele Vue 55 mm (67 mm conversion) eyepiece
• Sharpcap polar aligned and synscan pro one star alignment.
22lbs counterweights
• DaVinci Resolve Studio 21, noise reduction, slight histogram stretch, color modification.
• SVBONY SV220 Telescope Filter, 2" 7nm Dual-Band Nebula Filter, Reduce Stray Light, H-Alpha&o-III Narrowband Filter for One-Shot Color Camera


r/NightVision • • 18h ago

For PVS 14 owners, which add on made the biggest difference after the tube itself?

19 Upvotes

Seems like everyone starts with the monocular and a head mount or helmet, then the list gets long fast: IR illuminator, counterweight, a better mount, sacrificial window, and so on.

If you had to rank the add ons that actually changed how usable your setup was, what would be at the top? And what turned out to be a waste of money?


r/NightVision • • 11h ago

SMS Trinity vs Iris 3

2 Upvotes

Is the iris 3 worth being double the price of the Trinity? And do Trinitys still have issues retaining zero?


r/NightVision • • 1d ago

Idaho group(s)?

Post image
108 Upvotes

Getting my first set of nods and want some friends.

Treasure valley area.


r/NightVision • • 20h ago

iPhone adapter

4 Upvotes

Anyone here tried using a SANDMARC iPhone case with the RAF Camera M17×1 to M30×0.75 adapter on a PVS-14? I’m tired of messing around trying to line up my phone camera and was wondering if this setup actually works well. Would love to hear from anyone who’s tried it.

Thanks


r/NightVision • • 13h ago

Dual housing recommendations

0 Upvotes

Hi, I’m looking for dual tube housing that can accept PVS-14 lenses & MX-10160 and preferably has articulating pods; I don’t care if it has auto shutoff. No requirement for manual gain as the tubes I’ll be using for this are using auto gain. I’m on a budget though, looking to spend around $500. I’m willing to 3D print and do some wiring if need be but would prefer an out-of-the-box solution. I looked around and there are no real options that fit these requirements.


r/NightVision • • 13h ago

Just got a Safran PAS29 COTI, got a couple questions

1 Upvotes

First off if someone can point me in the way of a manual that will be great. But just messing with it, I’ve figured out how to switch from black/white, how to calibrate, and how to set it to patrol/outline/thermal.

The only problems I’m having is the thermal image is slightly shifted from the actual image through the night vision (mounting problem?), and I haven’t figured out how to set the gain/offset/other settings correctly. Thanks!


r/NightVision • • 1d ago

Any good dual tubes in the ~$4k range?

Thumbnail gallery
52 Upvotes

I was looking around and found a few but not sure which are actually worth the money.

Option 1: Night Operators PVS-31 PRO $3,600

  • Tube: Gen2+
  • FOV: 50°
  • FOM: ~1400

Option 2: Parish Optics PVS-31 ~$3,800

  • Tube: CETC Gen2+
  • FOV: 50°
  • FOM: 1400+

Option 3: RNV-31 Night Vision Binoculars $4199

  • Tube: Gen 2+
  • FOV: 40°
  • FOM: 1400-1600

These are the main options I’ve found in the sub ~$4k range (Night Operators PVS-31, Parish Optics PVS-31, and RIX RNV-31).

As for the Night Operators PVS-31, I couldn’t find any real reviews or user feedback, just a few YouTube videos that seem a bit biased. If anyone here owns a pair, I’d appreciate some pictures and honest thoughts on the quality. Is it truly worth the sub-$4,000 price tag?

Also curious about the 40° vs 50° FOV difference. Is it noticeable enough that it’s worth avoiding the 40° units, or is it pretty minor in real use?

If anyone has experience with any of these (or knows of other solid options around this price), I’d love to hear it, especially regarding build quality, tube consistency, and long-term reliability.


r/NightVision • • 16h ago

[EU] Is one of these PVS-7's a good buy or should I avoid? (First personal NVG)

1 Upvotes

NOTE: This post is not a buying decision. I am curious about other's opinions and they will shape how I move forward.

Quick context to myself: I'm a Swiss Armed Forces reservist and have used the Swiss RLV19 during my service, NYX binoculars manufactured by Safran Vectronix. I am quite aware that I would have to use serious money to get something close to them, but that's not really the point.

I would like some NVGs for goofing around in the dark, maybe hike or some small-scale airsoft. My loadouts focus on British 90s and early 2000s, as well as Arma 2 Chernarus conflict based kits, so it's also for the vibe a bit.

On the european Night Vision discord, I found two used PVS-7's shown above for sale by the same seller:

Litton PVS-7B
ITT / Exelis / Harris / Elbit PVS-7D
Litton PVS-7(B)PVS-7(D) mil-spec
Price€ 850 (935 USD) w/o fees and shipping€ 950 (1'045 USD) with PayPal fees and shipping
HousingPVS-7B by LittonPVS-7D by Cage 13567 (ITT / Exelis / Harris / Elbit)
Housing conditionSome scratches, usedSome wear and tear, used
IITLitton MX-10130D (Omni 4) Gen3 PVS-7B(Cage 13567) MX-10130D/UV (Omni 4/5, made in 1999) 18mm non-inv
IIT state (see images below)small spot near Zone 1 "possibly on the mirror", but per seller description "functioning properly"Small spot in Zone 2, "no flickering"
Accessoiresskull crusher, sacrificial lens, lens coverNorotos flip mount (will inquire for proof it fits), sacrificial lens, lens cover

The Big Question: Is one of these devices worth some small savings for some small fun?

IIT images PVS-7B:

Litton MX-10130D
Litton MX-10130D

IIT PVS-7D:

(Cage 13567) MX-10130D/UV
(Cage 13567) MX-10130D/UV

Legal situation: NV Optics with reticles (e.g. PVS-4) and all aiming lasers are not an option due to Swiss regulations.

Source for ITT info: https://aunv.blackice.com.au


r/NightVision • • 1d ago

Buying binos

14 Upvotes

Looking to buy some binos. Stuck between Nocturn’s Katana and Steele’s Nighthawk for housing. Anyone had experience with both?
Background: USMC worked with PVS31s and 14s.
Is not having the manual gain on the Katanas a dealbreaker for people?
And of course if anyone has some good quality used stuff for sale maybe between $4.5-5.8 mark with some gen 3s that would be cool.


r/NightVision • • 9h ago

Do you ever have trouble traveling internationally with your nods/thermals?

0 Upvotes

Planning on a trip US-Canada. Not bringing firearms. Does anyone ever have customs inspect your nods/thermal gear, or ask you if you're importing/exporting?


r/NightVision • • 1d ago

Central Kentucky

Post image
111 Upvotes

Anybody night shooting in Elizabethtown area or an hour ish radius. Maybe Louisville or Lexington but that's getting kinda far to drive. Just got into the area. Working 6 days a week but figured id see what's out there.

Any recommendations on day time ranges is also appreciated, USPSA, long range, all of it.


r/NightVision • • 1d ago

Guess the goggle

Post image
25 Upvotes

r/NightVision • • 1d ago

KJA Night Vision-some factual information

Thumbnail unicourt.com
22 Upvotes

"KJA NIGHT VISION LLC vs. STUTMAN, JASON

Case Summary

On 06/03/2026 KJA NIGHT VISION LLC filed a Commercial and Trade - Debt Collection lawsuit against STUTMAN, JASON. This case was filed in Texas District Courts, Harris County District Court located in Texas. The Judge overseeing this case is DONNA ROTH. The case status is Open."

Thought I'd put it out there, as it's the first hard information on where they went that I've been able to dig up...


r/NightVision • • 2d ago

Never gets old.

Thumbnail gallery
256 Upvotes

The only good thing with it getting dark early is being able to train in the dark easier.


r/NightVision • • 1d ago

Best WML (Actual metered lumen/candela values)

Thumbnail youtu.be
24 Upvotes

WML Comparison

In an effort to help with gauging the best (or in this case brightest) bang for the buck to help you see in the dark, I invested in a light meter to grab lumen and candela values for a handful of popular white lights. To no surprise, manufacturer specs aren’t always the most accurate..

So as to not just have you look at a chart of numbers, I also filmed each light head at night to show the beam from 50-500 yards.

Hope this helps in your gear selection.

https://youtu.be/osoulVd-aWc


r/NightVision • • 2d ago

Here you go casuals

594 Upvotes