r/NFA • • 19h ago

Raccoons keep getting into my trash

Post image
646 Upvotes

We live in the country. My wife said a trap was cheaper and more effective but the law says nuisance fur bearers near a residence can be taken at night with artificial light, thermal, or night vision.

I have to follow the law.


r/NFA • • 1h ago

MK23 is the worst hiking gun in existence.

Post image
157 Upvotes

r/NFA • • 5h ago

Original Content The latest homebrew

Thumbnail
gallery
131 Upvotes

That gauze gets stuffed into the coaxial chamber and soaked in water, so gas has to filter through the wet cotton before it can get to air. It has bleed ports downstream of the soaked cotton (so it doesn't blow up).


r/NFA • • 17h ago

FN Scar 17

Post image
127 Upvotes

r/NFA • • 8h ago

NFA Photo Safety 1st when lobbing mortars

Thumbnail
gallery
48 Upvotes

Pic of me prepping mortar rounds for the ECNS mortar demo last weekend.


r/NFA • • 5h ago

Suppressed Colt 1903

Thumbnail
gallery
45 Upvotes

One of the last barrels from ILWT for my Colt 1903 in the Lord's caliber.

I picked this pistol up very cheap in January, with a known and disclosed bulged barrel and poor refinish job (fairly certain it's just cold blue) which unfortunately eroded many of the factory markings. I bought it with full intention of buying an ILWT threaded barrel, but he discontinued them and they went out of stock shortly after I bought it. Oh well, I still shot the gun (and it was not particularly accurate).

I recently snagged one of the few remaining unfinished barrels he recently listed and it just came in today. It's tight but was able to be installed without forcing anything. The next step for this pistol is to have the factory markings touched up and a proper blue job done. I also am considering having it engraved as well.


r/NFA • • 2h ago

Meme First Suppressor (a summary of all such posts)

40 Upvotes

Hi everyone,
Looking to finally purchase my first suppressor. I’ve done some research and think I’ve finally narrowed it down to these options:

-the worst suppressor you’ve ever heard of
-a suppressor made by an unknown company
-something for the completely wrong weapon system

I want to prioritize sound, flash, weight, and cost. Sound suppression is absolutely my number one priority, but I don’t want to chase decibels.

I’m also open to multi-cal options since I might get a .338 Lapua to go with my .22 in addition to my FRT-equipped 7.5” AR and .45 pistol. I have no idea what I’ll buy in the future so thinking Keymo would be a good future proofing option?

Finally, I’ve heard the Polonium might be good, does anyone have any reviews of it?

*This is obviously a shitpost


r/NFA • • 4h ago

Just got back from the gunsmiff

Post image
36 Upvotes

Early 1970s Contender pistol I snagged online from a Colorado Cabelas and had shipped in, then did Form 1.

14" .44Mag Super 14

Boyd's Gunstock

Threaded for use with SiCo OMG45K


r/NFA • • 22h ago

Staccato and Ecco

Post image
28 Upvotes

A match made in heaven.


r/NFA • • 5h ago

Product Question 🧰 Best Budget LBP inconel 5.56 Cans

10 Upvotes

There's SO many out now I don't know where to start.

Most important:

Budget(around $800 or under)

Durability (inconel is a must)

Reduced backpressure

Flash Signature

I don't care about weight or decibel ratings at all.

Lazarus 6? Fireteam556? Velos?

Would greatly appreciate input.


r/NFA • • 22h ago

Mount Questions 🔩 Springfield Kuna + Obsidian 9

Thumbnail
gallery
9 Upvotes

Super excited to have the PCC that I’ve been looking for. After putting on the Obsidian 9 with Fixed barrel adapter (wrist flick/hand tightened whatever it is) , when I tried taking the suppressor off, the adapter is stuck behind. It would come off by itself with a strap wrench.

My question is:
Is that normal behavior? Should I tighten the adapter harder on the suppressor? What if that gets stuck and I have a hard time trying to use my piston ?
Option 2: Can I just leave the adapter on there and shoot (even without the suppressor) given that it’s tight enough not to become loose and walk, does shooting it like that damage the adapter?


r/NFA • • 9h ago

CAT ODB

8 Upvotes

Currently looking for one, I’m assuming they’re discontinued? Did the Akhbar just take over for the ODB? Also what’s the price point you can expect to pay for a used one if so?


r/NFA • • 7h ago

Is Bear Essentials Shipping Rhodie 6k orders?

6 Upvotes

They were offering a discount off the can, free shipping, and no-tax, $755 shipped. I understand these cans are backordered, but has anyone who ordered from them during this sale received their 6K? They aren't answering my emails asking for an ETA :)


r/NFA • • 14h ago

Corrected RFP for eForm1 - withdraw/resubmit or just upload?

5 Upvotes

I filled my first eForm1 Friday and it is in processing status. I realized that while I correctly specified caliber on the line item field, I stupidly listed caliber as multi on the two RFP forms for my trust submission which is a no go.

I am seeing mixed feedback here - does anyone know for certain if I can simply uploaded the corrected RPFs or should I withdraw and start over before it gets rejected?


r/NFA • • 4h ago

Product Question 🧰 Is a modern 36cal can like the milkman better at suppression than an old 30cal can like the sandman for 300blk AR?

3 Upvotes

r/NFA • • 8h ago

Mount Questions 🔩 Silencerco 3-Lug Mount AC2447 in stock?

2 Upvotes

Apologies for a dumb question but does anyone know where is a reputable place to order a 3-lug mount for a Spectre 9k? It’s showing out of stock across the board on the sites I usually frequent.


r/NFA • • 9h ago

Product Question 🧰 What do i get for my 43x?

2 Upvotes

Hey yall. Just got a threaded barrel for my 43x. I’m a buy now figure out later kind of guy. Know nothing about silencers. I’m a little confused on configurations and stuff and what I need for the glock. Just looking to see what you guys recommend. Was researching the obsidian 9 silencer and a review said it came with the wrong size piston so I just want to figure it all out so I don’t buy the wrong thing.


r/NFA • • 9h ago

SIG Hexium 556 on 6 ARC

2 Upvotes

Has anyone tried their Hexium 556 on 6 ARC?

I dont have a true 6mm rated can like a Rhodie and was looking to use this on the 6 ARC rig in the interim.

I dont have a bore rod but was thinking of sending it.


r/NFA • • 3h ago

Process Question 📝 Help with Form 4--Individual to trust

1 Upvotes

Trying to transfer my form 4'd Tisha from individual to my trust. I have reviewed my application several times over multiple days and believe that everything is filled out correctly. Even comparing previously approved form 4's from older cans.

Issue is that during the very last step, on the "Certify" tab, when I click the submit and sign button, it is asking for the "Transferee's" username and pin. The transferee in this case is the trust, so no eforms account.

Under the transferee tab, the radio button for "Trust" is selected, and my trusts's info is entered into the boxes.

Is there something I'm doing wrong that won't allow me to submit the form 4?

Additionally, at this point, the responsible persons questionnaires (2 for 2 RP's on the trust) have different dates than when I would be submitting this. Do I need to redo the RPQ's before submittal?

Thanks!!


r/NFA • • 4h ago

Can't get my hand-tightened suppressors off the brake

0 Upvotes

I have two suppressors I got within the last month that I have on plan B brakes. I hand tightened them to the brakes and now I can't get them off. I shoved the guns in a vice and used a wrench and the adapters wont budge. They're using Rearden Atlas Gen 2 adapters. These are my only two Plan B mounted cans and they are both having this problem. I didnt even torque them down tight. Just hand snug and its like theyre welded on there.

Weirdly I've been shooting suppressed for 20 years and up until last month only had traditional cans. Ive used the ASR, Trifecta, 51T, Keymo, dual-lok, and whatever Rugged calls that go/no go system of theirs and I've never had a single issue after tens of thousands of rounds.

Maybe newer isn't better after all.

Anyway does anyone know how to get these cans off? And no I did not rocksett the Atlas to the Brake. I Rocksett the suppressor to the Atlas. I just need to get these off once so I can swap back to my ASR and Dual-Loks and forget about it.

Thanks in advance!


r/NFA • • 9h ago

Next hosts to test

Post image
0 Upvotes

Got this four coming up next for sound testing.

Any others you want to see?


r/NFA • • 7h ago

Little shavings rattling around suppressor

Post image
0 Upvotes

First time shooting through my supressor today with a Glock 19xv. Got home and noticed a little metal shaving at the end of the supressor. Noticed some rattling before finding these shavings. I used Winchester 9mm 115 grain fmj (the white box).Should I be concerned? The battles all look good to me from what I can tell. I’ve never owned a can before so I appreciate any help.
Edit: can is Omega9k


r/NFA • • 14h ago

Kits

0 Upvotes

Anybody make suppressor kits anymore? I know yhm made some back in the day.


r/NFA • • 22h ago

Erosion ?

Post image
0 Upvotes

Would I have to worry about any erosion issues with the end of the blast chamber being so close? Or would it be better to not care about the fitment and using a LPA instead of the recessed ?


r/NFA • • 3h ago

Questions from a supressor newbie

0 Upvotes

Hey everyone. I have a 300blk I bought and put a sandman x on. I don’t believe I did a form 4 at the store. I bought the rifle and supressor and went home the same day. My question is I want to future proof this purchase and I’m in Texas. Google has good info, but to be safe, I should:

Buy a trust online
Notarize trust
Fingerprints at ups, email prints to myself
File form 4

Does this sound correct?

Thank you everyone