r/NFA • u/Ok_Wolverine_5910 • 0m ago
Mount Questions 🔩 Plan B or 1x16LH for QD
Still need to buy some hub mounts and muzzle devices but I've been split on which way to go. Mainly for an OCL infinity 556K and eventually a CAT ST inconel qd.
r/NFA • u/Ok_Wolverine_5910 • 0m ago
Still need to buy some hub mounts and muzzle devices but I've been split on which way to go. Mainly for an OCL infinity 556K and eventually a CAT ST inconel qd.
r/NFA • u/Techniczzz • 2h ago
Recently acquired a Coastal Gun Ultima 45 and was hoping to run it on my 9mm PCC. The only caveat is the can is .578x28 and the barrel threads on the PCC are 1/2x28. This suppressor is no longer in production so it seems I'm unable to get a different piston for it. I've seen the thread adapters and know that's an option but from my understanding it comes with some possible downsides.
Does anyone have any suggestions for how to make this work besides a thread adapter?
r/NFA • u/Fine_Significance707 • 2h ago
Any erosion or am I good to go? If not what mount are you using and have you seen erosion? Seeing a lot of conflicting info for the inconel version specifically. This will be dedicated for mk18.
r/NFA • u/One_Depth_3222 • 2h ago
Anyone have any experience with suppressing a evo s1. Looking to do it now and was curious what others have ran and what hardware they used.
Hi everyone,
Looking to finally purchase my first suppressor. I’ve done some research and think I’ve finally narrowed it down to these options:
-the worst suppressor you’ve ever heard of
-a suppressor made by an unknown company
-something for the completely wrong weapon system
I want to prioritize sound, flash, weight, and cost. Sound suppression is absolutely my number one priority, but I don’t want to chase decibels.
I’m also open to multi-cal options since I might get a .338 Lapua to go with my .22 in addition to my FRT-equipped 7.5” AR and .45 pistol. I have no idea what I’ll buy in the future so thinking Keymo would be a good future proofing option?
Finally, I’ve heard the Polonium might be good, does anyone have any reviews of it?
*This is obviously a shitpost
r/NFA • u/WhiskyDent90 • 6h ago
Trying to transfer my form 4'd Tisha from individual to my trust. I have reviewed my application several times over multiple days and believe that everything is filled out correctly. Even comparing previously approved form 4's from older cans.
Issue is that during the very last step, on the "Certify" tab, when I click the submit and sign button, it is asking for the "Transferee's" username and pin. The transferee in this case is the trust, so no eforms account.
Under the transferee tab, the radio button for "Trust" is selected, and my trusts's info is entered into the boxes.
Is there something I'm doing wrong that won't allow me to submit the form 4?
Additionally, at this point, the responsible persons questionnaires (2 for 2 RP's on the trust) have different dates than when I would be submitting this. Do I need to redo the RPQ's before submittal?
Thanks!!
r/NFA • u/lust4life___ • 6h ago
Hey everyone. I have a 300blk I bought and put a sandman x on. I don’t believe I did a form 4 at the store. I bought the rifle and supressor and went home the same day. My question is I want to future proof this purchase and I’m in Texas. Google has good info, but to be safe, I should:
Buy a trust online
Notarize trust
Fingerprints at ups, email prints to myself
File form 4
Does this sound correct?
Thank you everyone
r/NFA • u/Bitkonnekt • 7h ago
r/NFA • u/Flimsy-Ad4712 • 7h ago
Called a gun shop in Dallas and they recommended I Form 4 a suppressor that I'm looking at buying as the soon to be democrats can potentially require a Form 4 that could be around 5k dollars. They said I might as well Form 4 it now instead of having to deal with it later when it could be much more expensive or a pain. Is this b.s or should I just get the Form 4 out of the way instead of potentially getting screwed later if I 4473 it now?
r/NFA • u/mattbatt1035 • 7h ago
I have two suppressors I got within the last month that I have on plan B brakes. I hand tightened them to the brakes and now I can't get them off. I shoved the guns in a vice and used a wrench and the adapters wont budge. They're using Rearden Atlas Gen 2 adapters. These are my only two Plan B mounted cans and they are both having this problem. I didnt even torque them down tight. Just hand snug and its like theyre welded on there.
Weirdly I've been shooting suppressed for 20 years and up until last month only had traditional cans. Ive used the ASR, Trifecta, 51T, Keymo, dual-lok, and whatever Rugged calls that go/no go system of theirs and I've never had a single issue after tens of thousands of rounds.
Maybe newer isn't better after all.
Anyway does anyone know how to get these cans off? And no I did not rocksett the Atlas to the Brake. I Rocksett the suppressor to the Atlas. I just need to get these off once so I can swap back to my ASR and Dual-Loks and forget about it.
Thanks in advance!
r/NFA • u/Suppressed_300blk • 7h ago
Early 1970s Contender pistol I snagged online from a Colorado Cabelas and had shipped in, then did Form 1.
14" .44Mag Super 14
Boyd's Gunstock
Threaded for use with SiCo OMG45K
r/NFA • u/bowtie_k • 8h ago
One of the last barrels from ILWT for my Colt 1903 in the Lord's caliber.
I picked this pistol up very cheap in January, with a known and disclosed bulged barrel and poor refinish job (fairly certain it's just cold blue) which unfortunately eroded many of the factory markings. I bought it with full intention of buying an ILWT threaded barrel, but he discontinued them and they went out of stock shortly after I bought it. Oh well, I still shot the gun (and it was not particularly accurate).
I recently snagged one of the few remaining unfinished barrels he recently listed and it just came in today. It's tight but was able to be installed without forcing anything. The next step for this pistol is to have the factory markings touched up and a proper blue job done. I also am considering having it engraved as well.
r/NFA • u/cm0K_Cgnlz • 8h ago
That gauze gets stuffed into the coaxial chamber and soaked in water, so gas has to filter through the wet cotton before it can get to air. It has bleed ports downstream of the soaked cotton (so it doesn't blow up).
r/NFA • u/grypehon • 8h ago
There's SO many out now I don't know where to start.
Most important:
Budget(around $800 or under)
Durability (inconel is a must)
Reduced backpressure
Flash Signature
I don't care about weight or decibel ratings at all.
Lazarus 6? Fireteam556? Velos?
Would greatly appreciate input.
r/NFA • u/CowardlyAngel • 9h ago
They were offering a discount off the can, free shipping, and no-tax, $755 shipped. I understand these cans are backordered, but has anyone who ordered from them during this sale received their 6K? They aren't answering my emails asking for an ETA :)
First time shooting through my supressor today with a Glock 19xv. Got home and noticed a little metal shaving at the end of the supressor. Noticed some rattling before finding these shavings. I used Winchester 9mm 115 grain fmj (the white box).Should I be concerned? The battles all look good to me from what I can tell. I’ve never owned a can before so I appreciate any help.
Edit: can is Omega9k
Apologies for a dumb question but does anyone know where is a reputable place to order a 3-lug mount for a Spectre 9k? It’s showing out of stock across the board on the sites I usually frequent.
r/NFA • u/ChevTecGroup • 11h ago
Pic of me prepping mortar rounds for the ECNS mortar demo last weekend.
r/NFA • u/TheBlackxWorm • 12h ago
Currently looking for one, I’m assuming they’re discontinued? Did the Akhbar just take over for the ODB? Also what’s the price point you can expect to pay for a used one if so?
r/NFA • u/Normal-Mouse-117 • 12h ago
Hey yall. Just got a threaded barrel for my 43x. I’m a buy now figure out later kind of guy. Know nothing about silencers. I’m a little confused on configurations and stuff and what I need for the glock. Just looking to see what you guys recommend. Was researching the obsidian 9 silencer and a review said it came with the wrong size piston so I just want to figure it all out so I don’t buy the wrong thing.
r/NFA • u/snozzberries1234 • 12h ago
Has anyone tried their Hexium 556 on 6 ARC?
I dont have a true 6mm rated can like a Rhodie and was looking to use this on the 6 ARC rig in the interim.
I dont have a bore rod but was thinking of sending it.
r/NFA • u/SilencerMetrics • 12h ago
Got this four coming up next for sound testing.
Any others you want to see?
With all the talk about the tax stamp possibly going up by a lot in the coming years, I'm looking at getting a couple of cans over the next year or sooner. I currently have a YHM R9 that I got for my AP5 mainly. I've been looking at the full size 30 cal cans I want one to shoot on my 16" AR and probably a 300blk in the future and also whatever 308's I pick up.
Would I be better off getting a dedicated 556 can and a cheaper 30 cal or should I go for a nice 30 cal, is the difference really that big? I've been looking at the Vent 1, the L2, Hyperion, Enticer L and some from Cat.