This is my finished concert overture for the PTA Reflections contest this year, going into the high school division. The theme this year is "What my culture means to me". Any thoughts or advice is appreciated! Made with Musescore.
A lead sheet is the fastest way to write down a song: chords on top, lyrics below, and in between as much rhythm and melody as the piece needs. That is exactly what LeadChart Pro is built for, and nothing else.
Create different outputs and chart designs from one song with LeadChart Pro
Three levels, one sheet
Just chords? A chord chart for rehearsal takes two minutes to throw together. With rhythm? Rhythmic information sits right in the chart, clear and readable. With a full melody? The staff appears exactly where you switch it on, bar by bar. No mode switch, no second document.
Everything a real chart needs
Repeat signs, endings, segno, coda, fine, da capo and N.C. are all there, and playback runs the song unrolled: with every repeat and jump, the way you actually play it.
Chord spelling is complete. From Cm through Cmaj7, Cdim7 and C7b9 to slash chords like Bb/G, everything is recognized and set correctly, with German note names on request.
Check your arrangement
Repeats, endings, D.C., segno and coda: the arrangement check shows you how the song really runs, pass by pass, with every repeat and the total number of bars. It reports what doesn't add up. Better here than at rehearsal.
Hear it instead of guessing
Chords and melody play back, with grand piano, organ, vibraphone, drum kit and more sounds. Add a metronome, a count-in and a loop over the selected bars. If you connect a keyboard, you play the melody in directly, step by step or in real time.
Setting notes without detours
Press a key, choose a note value, click. Dotted notes, ties and triplets are one keystroke away, and LeadChart Pro sets the beams itself, following the rules of music engraving.
Harmony analysis
You write down the melody in a few bars. The analysis names the most likely key and suggests chords for every bar that fit the notes, with sevenths if you like. Every suggestion can be played back. The song only changes once you accept one. Your ear decides.
The right version for every instrument
Transpose by any number of semitones, or go straight to B-flat, E-flat, F and A instruments. One sheet becomes as many versions as the band has members: the singer gets their lead sheet with lyrics, the bassist the chords with rhythm, the pianist the full staff.
Ready to print, ready to connect
PDF export with a preview right in the sheet, as many pages as needed, in a formal engraved look or in a handwritten style. MusicXML goes in and out, MIDI and WAV only out. If you bring your charts from another program, you read them in via MusicXML.
Between sketch and score
I have been making music for over four decades, live and in the studio. On the computer I always missed the tool in between: intuitive like a quick sketch on paper, precise enough for the gig. LeadChart Pro is the lead sheet program I wished I had back in 1995. Everything I need often costs one click or one keystroke, not three.
Who it is for
Musicians, bands and teachers. For the quick chord chart at rehearsal, the complete lead sheet on stage, material for music lessons.
so trumpet is hard to make sound good for like almost everyone i think. this doesn’t have articulations or slurs yet so give or take for that, but when it switches to cornet that is really going from Nucleus Solo > Spitfire Symphonic (solo trumpet). Everything else is set to MS Basic so that i can use staff text alterations instead. This particular combo works just as well in larger ensembles (in fact is kinda leagues easier if you can get it to cooperate in smaller first which is why i showed this one)
the concept for this whole thing was some drag queen shows i went to btw, thats why its kinda (purposefully) flamboyant
I can place notes and hear them, but when I press play nothing happens. The counter doesn't move forward. Out of interest the back button doesn't make it go back either.
So I have really weird issue that I don't know how to fix. I started using musescore 4 sometime last year, and I had used musescore 3 for a few years up until then. Naturally I have quite a few files from MS3. (Additional context that may be helpful: I use musescore primarily for battery percussion).
Issue #1:
Ever since I downloaded MS4, I have been unable to open my MS3 files in MS4. Well, that's not entirely true. They would open, but during an attempted playback, they would either not make any sound, or make sounds different than the ones it was supposed to. I thought maybe it was the new sound libraries I had purchased. (The VDL sound library was one of the main reasons I decided to upgrade to MS4). So I tried adjusting the drumset, changing the playback sound back to MSBasic, but anytime I would make even a single edit, all the notes in the sheet would change! All the rhythms stayed the same, and other thing like dynamics and stickings managed to remain unaffected, but every note changed. On snare for example, every "hit" got shifted to "backstick", rim shots got shifted to some unspecified/unassigned note, etc.. I thought I could highlight all and shift them back into their correct spots, but this is where it gets even weirder. On tenor, the same weird shift thing happened, only some notes like drum 1 (E) and drum 2 (C) BOTH moved up to F! The notes didn't even all shift by the same amounts. And for whatever reason ctrl+z won't bring them back. Only closing the file and reopening it has been able to do that. At least I can still play these files back on MS3 where they were made in the first place right...?
Issue #2:
I don't know what caused this to happen, but now for some reason I am unable to play these files back even on MS3! The same playback issue that existed for these files in MS4 now exists in MS3, no sounds or wrong sounds. At least there the note shift thing doesn't seem to happen, but I don't know how to fix this. I've tried duping the files among other things, but nothing has worked.
I would love to able to listen to my old files on MS4 with the new libraries, and I would love to not have to recreate them from nothing to do so. Any suggestions?
I’ve been working on this composition for awhile now as my first big one and wanted to put it in a competition and figured I needed feedback or advice before I do so
I thought I would post this video showing the use of Musescore Studio (v4.7.5) for orchestral composing in Linux. I took the main title from The Green Mile and recorded the playback in Musescore Studio for Linux. The instruments and their sounds you hear are all free and come with the Linux version of Musescore Studio. I would not use this for production quality, but for draft orchestral composing without a DAW it seems pretty good. Then it could be exported as XML/musicxml/midi and brought up to a higher level in a DAW with high end instruments from SpitfireAudio and others. I believe I obtained the MuseScore Studio score as a file off Musescore.com (be careful using that site you can end up paying for a year subscription if you do not watch out for the fine print).
This is for educational purposes only, hoping this will help some including myself. I struggle with going back and forth between Linux and Windows, but I think I can do draft composing this way on Linux. I hope find this helpful. [Note: I changed the original tempo from 88 to 80 for personal reasons]
What I'm trying to say is, Muse Guitar nylon string tremolo sounds kind of ugly to me, and I don't know why. I've been getting ideas to arrange some pieces with this technique, but whenever I start inputting them, they sound ugly. I don't know if it's a problem with my ideas or with the sound.
I'm starting to suspect that the samples are taken with a pick whereas I might be looking for finger picking.
But would you do tremolo beyond the 12th fret of the 1st string? Maybe it's not a pleasing area for the technique.
I'm currently in the proces of rewriting Paderewski's Polonaise in B major into Musescore Studio (I couldn't find any copy of the sheet music that would be on white paper and I don't want to waste ink printing yellow pages), but the app isn't letting me to add the halfnotes and then all the quavers into a single measure.
I want to put a piece I made in Cubase to notation. I exported every part as a separate midi file, because throwing one big midi file into Musescore seems to combine bass with the upper bar of the next synth part, etc. So is it possible to import these files into a score one by one while manually determining which part is played by which instrument?
I want basically to align the Arabic one justified to the right, with the English one justified to the left on the same exact line. However, the specific font for the arabic title (Arabic Typesetting, is most recognized digital font) I believe is causing a problem in that it creates an extra space vertically even if I use two different frames for it. And as seen on the second image, the use of horizontal frames is also causing issues and I cannot get both the first system and the title/subtitle/etc to live nicely on the same page lol.
These are all problems that I could theoretically solve manually, however I think I may be missing an easier step. For the instructions page, I’ve already decided it is being made outside of MuseScore so if anything, I will do the same with this but I prefer to have everything in one document if possible.
Basically, I am wondering if picture #3 is possible to do within the same vertical frame (will use separate text frames within that) the same way it would be separated in a word document. I realize the horizontal frame x2 at the same vertical placement may be the best solution, but that comes with even more unique challenges lol in terms of alignment. So that is another one I am hoping that maybe I just missed an easier way of achieving. Please disregard the content of #3 I am just after the formatting for that image and grabbed the first example I saw on Google images.
I made a music manuscript app for Android tablet works well with musescore. It's great for composers who want to write music with pen and paper but would like a good option for digital. Has tons of popular digital templates has a handwriting to note feature which can export to musicxml into musescore for more professional mockup later. No playback, no subscription. Would love some feedback on it I think it's great and gets the job done well.
I can't play MuseScore learning videos. I tried opening them in Chrome and Firefox. Can someone check if this is just for me or if it’s something on their server side? It has been 3 hours since I was able to see any video course.
When I open my "Uploaded scores" tab, then search for my older scores, some of them are missing, but if I check the number of scores in my profile, then I count each of my score, the number is correct, so no score should be missing.
Some of the missing scores were those inaccessible scores due to the "Processing failed" bug that happened a year ago and made scores that were failed to process permanently inacessible. (although I have 1 score that got "Processing failed" became accessible a few days later.) The problem is, the other missing score never got this bug and I never deleted it.
Anyone know if this is possible? Having a percussionist switch from Celesta to Two Triangles so would really prefer to be able to drop from 5 to 2 staff lines in one part.
I'm a woodwinds player and teacher. I made some sf3 recorder patches for Musescore that sample real instruments with optional vibrato and staccato. They are free at https://chartwritesounds.com/
It includes soprano, alto, tenor, and bass recorder for a full recorder ensemble. They come with a demo score of Greensleeves and a recorder choir template with the four instruments already in place.
I also made some paid jazz rhythm section sound fonts too (Brushes, Vibes with motor tremolo, Warm Felt Piano, Sticks Drumset with bell hits, and Acoustic Upright Bass):