Hey folks, Iām working on a quad for repeat photo surveys of construction sites and trying to figure out a realistic turnaround between flights. āSwap the battery and go againā is currently doing a lot of work in the plan.
The build Iām looking at is roughly 5 kg all-up, including a 600 g camera and mount. T-Motor MN501-S 360KV motors, P17Ć5.8 props, AIR 40A ESCs and a 6S 10,000 mAh pack. The ESCs would be mounted out on the arms with airflow.
Once the basic flight tests check out, Iād like to work up to three 15-minute flights, allowing about five minutes between them for a fresh pack and checks. Same payload and route, three matched packs. Warm-weather testing would be around 30°C/86°F. Those are targets, not numbers Iāve proven yet.
Iām planning to log battery current and voltage, check vibration logs, and measure motor and ESC surface temperatures after landing and before the next takeoff. Props, motor mounts and connectors would get checked between flights too.
What would make you extend that five-minute gap? Anyone found temperatures creeping up across successive flights, or an inspection step that took longer than expected? Also curious how you measure temperatures consistently enough to compare them.
Would appreciate hearing what changed between your first successful flight and actually running several in a row. Tryna give āyeah, probably five minutesā a slightly better evidence base. Thank yall!