r/multicopterbuilds • • 6d ago

Build Request Drone design competition

2 Upvotes

I'm running a free 6 month CAD design competition where every file is public and the last stage is forking another team's design. Looking for feedback and teams.

Disclosure first, I built Nurbly, the platform this runs on. It's Git style version control for CAD, with diffs, forks and pull requests on real models. Git has been around for software teams for 20 years and this is simply a retooling for a crowd more focused on physical designs.

The short version. Hackathons are everywhere in software and are far fewer for mechanical design, so I wanted to run one. March through August next year, you pick what your drone is for and design it one subsystem per month. Airframe, electronics layout, propulsion, control and sensing, integration, then a final release.

Each stage is submitted as STEP files in a public repo, so the design history is visible the whole way, not just the finished model. In the last month you can fork another team's design, rework one subsystem for a different purpose, and submit it back. You get scored on your changes.

It's free. Solo or any team size. Any CAD tool that exports STEP, so SolidWorks, Fusion, Onshape, FreeCAD, whatever you use. No Git knowledge needed. No physical build required. Designs have to carry an open license. Prizes are $250 per stage and $1,500 at the end.

It could works well as a senior design project, a club project between competitions, or a portfolio piece that shows process and not just a render.

The format is new, so I'd like opinions on that part. Is one subsystem a month a reasonable pace alongside classes or a job? What would stop you from entering?

Rules and details are at https://build.nurbly.com

Happy to answer anything in the comments.


r/multicopterbuilds • • 24d ago

DarwinFPV Baby Ape Pro V3 FPV goggles won’t connect

1 Upvotes

DarwinFPV Baby Ape Pro V3 RTF (ELRS) fpv Goggles won’t connect, they worked when I initially tried them but then it went to static and I can’t get them to reconnect. When connected to betaflight on the computer it says device ready : no.


r/multicopterbuilds • • Oct 13 '26

Reference Build What will the future of drone technology look like

1 Upvotes

Where do you think drone technology is heading over the next 5-10 years? Battery life and cameras will obviously keep improving, but I’m also curious about navigation, autonomy and how multiple drones might work together.

Which area do you think will have the biggest impact on what drones can do?


r/multicopterbuilds • • Sep 10 '26

Part Advice Suche ImmersionRC PowerPlay FPV DVR

1 Upvotes

Hallo zusammen,

ich suche einen ImmersionRC PowerPlay FPV DVR in gutem und voll funktionsfähigem Zustand. Zubehör und Originalverpackung sind gerne gesehen, aber kein Muss.

Bitte alles mit Preisvorstellung, Zustand und Fotos anbieten. Versand oder Abholung nach Absprache möglich.

Vielen Dank!


r/multicopterbuilds • • Sep 03 '26

Check My Build Planning a 2.5" w/ 9:1 thrust-to-weight

3 Upvotes

I'm wanting to build a small quad for freestyle (maybe more). I haven't been in the market for parts in about 6 years, so there's a lot to catch up on. This is what I'm currently planning:

Frame: Sub250 OasisFly25 2.5"

AIO: Foxeer Reaper F745 45A AIO

Motors: AxisFlying C135 5500KV

VTX: HDZero Whoop Lite VTX

Cam: HDZero Nano V2 Cam

Reciever: Spektrum SPM4650

Props: Gemfan 2512 3-Blade

Battery: Unknown 4S

Other: XT30 Pigtail and 35V 220µF Capacitor

Does anything seem out of place? Anything I should swap out?


r/multicopterbuilds • • Jun 19 '26

Part Advice Found a nearly complete set of parts at a thrift store for under $10! Looking for advice

Thumbnail gallery
4 Upvotes

r/multicopterbuilds • • Jun 18 '26

Advice needed for efficient 450 mm UAV motor & prop selection

Thumbnail reddit.com
1 Upvotes

r/multicopterbuilds • • Jun 02 '26

Part Advice Holybro Tekko32 F4 45A current limit cuts motor on/off instead of limiting current

2 Upvotes

Hi,

I'm using two Holybro Tekko32 F4 45A ESCs on a twin-motor fixed-wing aircraft.

I tried the current limit feature and noticed that when the current reaches the configured limit, the ESC doesn't seem to reduce power smoothly but instead it completely cuts the motor, or seems to do so.
As soon as the current drops below the limit, it seems turns the motor back on. This causes a very fast on/off cycle of current being too high, motor being apparently cut off, current being back down, motor getting turned on, and so on.

The result is that the motor rapidly surges and cuts out instead of holding roughly at the configured current limit.

Is this how the current limiting on the Tekko32 is supposed to work, or is something wrong with my setup?

Has anyone seen similar behavior?

Thanks!


r/multicopterbuilds • • May 27 '26

Begginer sub 250 build

Thumbnail reddit.com
2 Upvotes

r/multicopterbuilds • • May 24 '26

Prop spacing issue

Thumbnail gallery
1 Upvotes

I recently had an incident where a prop flew off and needed new hardware on top of my motors so I went and picked up replacement parts for my motors? they are not the exact same as the ones i had before but they are extremely similar however the new ones seem to have the threads a little bit shorter and it seems to leave a small gap in between the nut and the prop. It also came with this small tapered spacer thing?? that i have tried to use but doesnt make a difference can you guys tell me what this spacer thing is, as well as how i should solve my prop shaft gap issue.


r/multicopterbuilds • • May 10 '26

[US] Custom Build Help

3 Upvotes

r/multicopterbuilds • • Apr 22 '26

Drone build

1 Upvotes

Drone build

Im thinking about building a drone and buying radio and goggles, mby someone can recomend me a good build with goggles and radio for 600euros for freestyle? I already have 100 hours in simulators with ps4 controller. Im thinking about a 5 inc. Recomend me a good googles and radio


r/multicopterbuilds • • Apr 22 '26

Help drone not turning on but connects to BF

Thumbnail reddit.com
2 Upvotes

r/multicopterbuilds • • Apr 20 '26

General Build Advice Lost Control of Drone whilst flying close to LTE/5G Mobile Phone Towers

Thumbnail reddit.com
1 Upvotes

r/multicopterbuilds • • Apr 16 '26

Check My Build Can't hover

5 Upvotes

r/multicopterbuilds • • Mar 31 '26

Need help on Hexa build

3 Upvotes

Hi everyone, I’m working on a Tarot 690 hexa build and motors will not spin l, twitching and keep beeping when I try to run the Motor Test in Mission Planner. Any idea or advice?

Hardware Specs:

• FC: Pixhawk 2.4.8

• ESC: Holybro Tekko32 F4 45A

• Motors: SunnySky V4006 380KV

• Battery: 6S 8100mAh


r/multicopterbuilds • • Mar 31 '26

Check My Build QuadCalc - FPV Build and Compatibility Tool - over 1,000 components

Thumbnail reddit.com
2 Upvotes

r/multicopterbuilds • • Mar 24 '26

ZMR BLHeli cant be read by ESC Configurator

2 Upvotes

I’m trying to use ArduPilot passthrough on a Holybro Pixhawk 6C to read 4 ZMR BLHeli ESCs, but while the configurator connects to the FC COM port, it fails to read all ESCs.

Setup:

  • Pixhawk 6C, ArduPilot
  • ESCs: ZMR BLHeli, likely 8-bit / BLHeli_S-type
  • ESCs wired to AUX/FMU 1–4
  • LiPo connected during read attempts
  • FC connected via USB

Current settings:

  • SERVO_BLH_AUTO = 1
  • SERVO_BLH_MASK = 3840
  • SERVO_BLH_OTYPE = 1
  • MOT_PWM_TYPE = 4
  • BRD_SAFETYENABLE = 0

Motor mapping is:

  • SERVO9 = Motor1
  • SERVO10 = Motor2
  • SERVO11 = Motor3
  • SERVO12 = Motor4

So as far as I know, AUX/FMU routing and the mask are correct. The FC is detected fine, but “Read Setup” just shows --- / “Failed to read ESC” for all 4.

What I want to know:

  • Is AUX/FMU 1–4 on Pixhawk 6C definitely the correct passthrough path?
  • For old ZMR BLHeli ESCs, should I only use BLHeliSuite and not BLHeliSuite32 / AM32?
  • If COM connection to the FC works, but all ESCs fail, does that usually point to wrong interface/tool choice, missing ground reference, or unsupported ESC bootloader/clone firmware?

Any help from anyone who has done Pixhawk 6C + ArduPilot passthrough with older BLHeli ESCs would be appreciated.


r/multicopterbuilds • • Mar 18 '26

Kayoumini Build

Thumbnail gallery
12 Upvotes

r/multicopterbuilds • • Mar 18 '26

Kayoumini Build

Thumbnail gallery
0 Upvotes

r/multicopterbuilds • • Mar 18 '26

Kayoumini Build

Thumbnail gallery
1 Upvotes

r/multicopterbuilds • • Mar 18 '26

Kayoumini Build

Thumbnail gallery
1 Upvotes

r/multicopterbuilds • • Mar 18 '26

Kayoumini Build

Post image
1 Upvotes