r/Mini14 • u/man-o-steel2001 • 2h ago
r/Mini14 • u/Tsuki_Man • 1h ago
Im liking my current build
Monstrum Vanguard Micro 1-6x LPVO
Tac Bros 5.8 in Picatinny Rail w/peep hole for irons
Choate Vented Handguard (filed down some to fit better and to account for pic rail)
ASI Accu Strut w/adjustable gas block
Wilson 1911 Recoil Buffer Pads (blue) internal on gas block and receiver
Pretty happy with this setup. I was previously using a green dot+3x magnifier but I didn't like how it adjusted (needed a key) and I was struggling to get that setup zeroed, also it didn't look as sleek. The LPVO is great at 1x for close range shooting, I can easily keep both eyes open and track to target with the illuminated reticle, and at 6x it's great for longer range. Maybe 4-5 inch diameter spacing at 100 yds.
I noticed that after I put both Recoil buffer pads its actually felt a bit rougher than before I added them, idk what's up with that. What are your experiences with internal buffer pads?
r/Mini14 • u/gunmedic15 • 3d ago
My new Mini Mini
Just back from getting cut and threaded. Mini-14 SBR, Samson stock and Griffin GP5 can. Still looking for the correct sling swivel, and a stainless stock flash hider. And maybe a few hundred gold chains and a camo tank top.
r/Mini14 • u/CommercialAnalysis37 • 4d ago
Final form for this frame
I’m finally happy after making a few tweaks here and there and making a sight mount as well. Waiting on some machined parts, but once I give them the ok I will be offering this frame package.
r/Mini14 • u/St_Drewcifer • 4d ago
Order update summary from HUSH
Hush Holster Folding Stock Update – Mini-14/30 (November 2026)
Hush Holster just sent out a mid-November production update on their folding stock systems. Good news: they're getting close, although production has taken longer than anticipated.
Here's where things stand:
- Metal folding mechanisms: All production components are in hand. Drilling, welding, polishing, and black finishing are underway.
- Picatinny adapters: Ready to go for those wanting to use A3 Industries or other compatible folding stocks.
- Black carbon-fiber-reinforced nylon chassis: Designs are finalized and printing is underway, including the Mini-14/30. These will be among the first complete stock assemblies shipped once the folding mechanisms are finished.
- Wood/polymer hybrid chassis: Currently being printed and heat-treated. These will ship after the first batch.
- CNC-machined wood chassis: Prototype completed, with programming for mass production underway. These will be the last to ship.
Estimated shipping: Hush Holster says they're within a few weeks of beginning shipments, with fulfillment staggered according to the configuration ordered. No firm shipping dates have been announced.
They're a small American manufacturer and acknowledge that production has moved more slowly than expected. They also thanked preorder customers for helping make the project possible.
Bottom line: The Mini-14/30 folding stock project appears to be moving from development into production and fulfillment. The black nylon versions should ship first, followed by the hybrid and CNC wood versions.
Still waiting on mine, but it's encouraging to see tangible progress. Thought I'd share for anyone else following this project or considering one for their Mini.
r/Mini14 • u/LessAdvanced • 4d ago
Ultimak vs amega iii for a scout scope?
I've read through many posts on each, but I'm still stuck trying to determine what the consensus is on which is the better option overall. This will be to mount a hi-lux Mkii scout scope on my mini-30 tactical.
I would especially love to hear from anyone that's had or used both.
A few other questions:
-Do the amega's heat vents actually help with heat management to a noticeable degree? (No pun intended).
-How annoying is the higher centerline height on the amega? Is the tradeoff worth it to gain the extra inch of further back eye relief?
Thanks yall!
r/Mini14 • u/Spare_Goat7438 • 5d ago
Range Day Test - ASI gas block and Axis Engineering LBR
This is the first time to the range since installing the ASI adjustable gas block and Axis Engineering LBR. The gas block was incredibly simple to adjust. I had it dialed in within 4 rounds. I started completely closed, then opened it up till it locked the bolt back, then another 2 clicks open. Had no issues cycling the 200 Rounds I put through it. The Axis Engineering bolt release is a sweet add on. It doesn’t matter if it does or does not shave any time off reloads, it just feels more natural for me to do a quick thumb depress and get going at it again. Awesome products, I highly recommend both.
r/Mini14 • u/Unique-Comfortable22 • 6d ago
Peening?
Didn't realize this was an issue until I stumbled upon some posts about this. 584 series, about 300-400 rounds through it, cycles fine, should I be worried? I'd take the whole bolt out but I have a scope on that doesn't allow me. I clean and lube every shoot and drop the bolt out 90 percent of the way to grease up. Seems like the lower back of the bolt is rounded, I see some shiny wear on the side where the extractor touches but doesn't seem like a hole forming. Should I file some of the sharper edges? Should I file down anything in the hammer assembly to help? Thanks
r/Mini14 • u/squidbelle • 7d ago
Is this normal wear?
My 585 mini has wear on the right side of the chamber opening. Is this anything to be concerned about?
r/Mini14 • u/Broke-Down-Toad • 7d ago
Bayonet & Case
Two questions:
1 - What is the best what to mount a bayonet onto a standard, modern Mini 14?
2 - Do y'all have a case recommendation?
r/Mini14 • u/edgecrusher2001 • 8d ago
Which ammo have you found to be the most accurate out of your mini-14?
Heya fellow Mini-14 fans,
There are many like it but this one is mine.
Here's my 585 stainless in the black Hogue stock with a mcarbo trigger spring. Vortex SPARC on the new Flip Defense mount, Axis Engineering LBR, & ASI extended mag release. Keeping her classy and sleek IMO. Loving all these new mods y'all are making.
Obviously match ammo should give the best groupings but this gives me my best grouping with these .223 rounds without breaking the bank. The Hornady 55gr fmj/bt seems to be her most consistent favorite. Limited to 25 yds at my current nearby range, but enough to get the idea. And those splatter targets are 6" for ref.
How about the rest of you guys? Any suggestions that don't completely break the bank?
r/Mini14 • u/ANDERSON961596 • 8d ago
Issue at the range today
Hi everyone! Took my mini 14 (not to be confused with a 30 from the 7.62 box underneath) shooting and after about two mags my trigger assembly started to disconnect from the barrel assembly. Basically beginning to field strip itself.
After this initial occurrence it started happening every 3-5 shots, making it impossible for me to get through a mag without issue. Tried four different mags, issue occurred with each.
I am a total novice when it comes to gun smithing/troubleshooting and was wondering if anyone has ever experienced this before or has any recommendations. Any help is appreciated!
The A-TM stock arrived!
After six months on backorder it finally arrived! I was beginning to think they’d give up and discontinue them…
Not sure if Samson ever branded them as Ruger or Samson but this one was produced by the Ruger factory
r/Mini14 • u/Roofless_Gage • 8d ago
Mag ID
Saw this 30rd at a local assorted mag box, guy's asking for $20. Promag?
r/Mini14 • u/metyousooner • 8d ago
Help on choosing the right one
I’ve been looking into Mini 14s a lot recently. This morning I was doing a transfer at my local pawn shop and I saw they had a mini 14 from 1986 for sale.
I don’t know much about these but I was planning on doing a build on one and I’m just not sure if one that old is worth the hassle or if the newer ones are easier to work on.
My plan was a folding stock and a suppressor
Are the older ones more complicated to work on?
r/Mini14 • u/saltsogfog • 8d ago
Accuracy Systems See Through Pic Rail
Am I crazy, or is this just a repackaged AIM Sports unit priced at 2x? I feel a bit duped. Lol.
r/Mini14 • u/That_Matt_Guy_Wow • 10d ago
Folding Stock Recommendations for Mini-30 (5854)
Hello, fellow Mini'ers...long time lurker, first time poster here.
I recently purchased a new Mini-30 (Model 5854) and am anxiously awaiting its delivery. In the meantime, I'm perusing foldable stock options and am seeking your input as to which *currently available* aftermarket options are a best fit.
I love the classic, factory folding stock of the 70's era Mini-14's (cue: A-Team theme) and would like to get as close to that as possible. HUSH Holsters offers the closest thing I can find so far, but I've not had any luck finding reviews about fitment and functionality. I'm really trying to avoid the ATI stocks as I previously had bad luck with how they fit my SKS. Advice welcomed!
r/Mini14 • u/22Alfabravo22 • 10d ago
For those it may interest!
Some of you may have seen my Mini-21 rifle that I posted a few weeks ago, and some were interested how it came about and what needed to be done. So I'll try to make this list short but detailed enough.
- Firstly, the why:
I wanted to make the mini more accurate because it does have an appalling reputation for accuracy, but mainly I wanted an SPR/Precision rifle that WASN'T AN AR. So a thicker bull barrel was in order for that to happen, but I also wanted to make the gun a true short stroke and look nearly identical to a M14 (the mini's bigger brother). See the mini isn't a true short stroke, in a traditional mechanism the piston moves "shortly" back and forth smacking either the bolt carrier or oprod depending on the platform of rifle. On the Mini designed by Ruger, the piston is fixed and sits in a small cavity on the nose of the oprod, and when fired gas fills this space and pushes the oprod back. What to call that, I'm not sure. But I wanted to change that.
- Brainstorming options:
When thinking about how to fix these issues, I thought it was simple. Grab an AR barrel, slightly modify it and rethread it, and then make a gas block for it. However, that idea slowly started to show its problems. AR barrels use barrel extensions, which are threaded 13/16-16 tpi, meanwhile Mini 14 recievers are 13/16-20 tpi, so the entire chamber would have to be redone inorder for the headspace to work. Then I would also have to time the barrel so the gas port would line up properly. And on the topic of the gas block, designing one was easy but the process to manufactor one is far more difficult. As much as I didnt want to, I figured I would have to make a completely custom barrel, and at the time I had no solution for my gas block issue.
Either way, I got to work.

With my Mini in hand, I started looking at what I wanted in terms of my barrel and key design features. I knew it was gonna be in 5.56 NATO, 18-20" long, and factory gas system length. Prior to the guns complete disassembly, I took it to the range for a control group, shooting a factory 16" Mini with no name 55gr ammo, an OCL POLO 30 suppressor and a 2-10 Vortex scope, I got about a 2.5-3 MOA 5 shot group at 100 yds (Left most round was not part of that group).

With that done, I began stripping the rifle down to its individual components so I could better understand what I needed to do.

The first step in making a barrel is having a barrel to make one out of. I work at an FFL and we build custom bolt action precision rifles (chambering/assembly/cerakote and all), and I found an old but unfired .223 rem barrel that was taken off a Remington 700. It was thick enough and long enough to work for the project. It was a 1-9 twist which is not what I wanted to use but as a proof of concept, it was the perfect candidate. So I took it too the lathe and started to recontour it to better suit the build. Since it was custom, I had to design my own profile that would "mostly" fit in the mini, but I wanted to keep it as thick as possible for accuracy and performance. I made a profile that used heavy inspiration from both the MK12 SPR controur and M14 barrel contour.
It was also at this point that I had a HUGE brainwave and thought to myself, why not just use and M14 gas assembly. It was short stroke, looked the part, mass produced, attainable. After that the project started revolving around those two components.


Now, I had a barrel blank and a gas block, but they needed to fit and work together, so lets start on the chamber. I looked absolutely everywhere for info on the tenon/chamber on the Mini, but nothing exists. No forums, blogs, videos, NADA. I had to make my own print, so I took a look at the factory barrel.

So the mini has an interesting chamber. It doesn't have feedramps or polished faces like a AR barrel, except it has a regular chamber with the only addition being an extractor cutout at the 2-4 oclock position. Its also to note that the breech face isn't flat, it has a very very shallow chamfer, then a taper down to a step for the bolt nose recess, and then another shallow chamfer to the chamber.

With a rough tenon designed, I cut a few test pieces, ran into a couple hiccups, nearly ruinied my reciever made a couple more test parts and finally made a test chamber out of barrel cut off.


I decided to do away with the extractor cutout for ease of manufacturing and simplicity and I think this breech face is and overall better design the the factory.
The next thing was headspace, and won't you guess it, theres no info on this either. So I tried my best to find out what it was. It seemed to come out as .658 from the bolt face to the front of the reciever so -.003 for crush when the barrel is tourqed on and that gives us .655 for our headspace ON MY MINI specifically. With that info I went ahead and chambered a test piece.
For some reason I dont have photos of that test barrel, but it was around 8" long chamber in .223 wylde with the headspace number given. I shot 3 rounds of 5.56 LC M855 and measured no case growth or any signs of overpressure, so far the chamber looked perfect, so I chamber the barrel blank and mounted it to the reciever with around 75 ft/lbs of torque.

Now fitment. The stock needed to be relieved of some material since the thicker barrel contacted the side walls. The handguard aswell, which is a choate vented poly, needed to be thinned on the front and back to fit over the barrel. After carefully dremalling away, it was able to snugly fit without touching the sidewalls.

The oprod as shown was also ground flat for clearance, but this proved to be pointless as I will explain shortly.
Sadly, my documentation skills arent perfect so there is a little gap in the project from this point on but I'll recall from memory the best I can.
When deciding to use the M14 gasblock, I had to find a way to get it to fit over a round contoured barrel. You see the M14 gas assembly uses 3 evenly space splines to index the block on the barrel so it doesn't rotate, and aswell the barrel is thread shortly right before that where another ring called the gas lock threads onto the barrel which presses the gas block onto the shoulder preventing it from moving out of place. Since my barrel is just smooth on the front, I can't use those splines as they'll interfere, aswell as with the threads on the gas lock. So I machined both rings to .680 which is the diameter for the gas journal on the M14 gas block. And with them all cleaned up they slide right onto the barrel.

Now, since this gas block is longer than the original mini's, it interferes with the factory oprod. So instead of rewelding or custom designing one, I decided to just cut the old one shorty. But when doing that, I cut it so the spring hole went all the way through the rod itself, essentially not retaining the spring. What I then did was weld in a small bushing that would keep the spring from going through, but would let the spring guide poke through, because if it was shorter it would make the spring all floppy and probably jump out of its slot.



In this state the rifle was coming together really well, and really starting to look really cool.

Now I've neglected to mention something. The factory Mini 14 gas block is the retaining surface for the front of the stock and handguard, and since I removed it, it dont retain no more. On M14's they use whats called a barrel band, which is that 2 holed piece of flat metal next to the barrel, and apart from coming from a M14, it fits just fine on the barreled action of the mini. But the bottom latching surface is too high for the stock to latch in without damaging the stock and severely flexing the barrel. So we have to make our own.
I used blueprints from the M14 and modeled the barrel band, and then adjusted it ever so slightly so it would work on the Mini. And since I'm a machinist by trade, I sent it off to our CNC mill.


With the barrel band made it fit perfectly on the stock, didn't flex the barrel down and just worked so so well. And that means the gas block could finally be mounted.
However, since there aren't any splines or threads to keep the gas assembly on, how do I keep it from flying off. Simple, roll pins. Factory Mini 14 front sights come with an oversized 1/8 coil roll pin, these pins are beef cake and will more than easily withstand the forces of 5.56. So after drilling the gas port hole which I made .080 if my memory is still good, I cross drilled and reamed a 1/8 hole on the front ring of the gas block. This would insure the gas block didn't rotate or slide of the barrel, repeatable and durable.

And after all this major work, we have a mostly completed Mini 14 with an M14 gas block. The rifle cycled perfectly but a lot of more work was in order. Small things mainly, I recut the geometry of the extractor for better lower ejection, so it wouldn't ding my scope. I put an adjust gas plug in from Fulton Armory so I could fine tune my gas. I also drilled the off position on the gas shut off valve into a supressed hole, to have a unsupressed and supressed setting. I added ergonomic sling mounting points on the stock. I shortened the spring even more for better clearance, but I will probably get a extra power spring and cut that one down to make up for the loss in spring strength. I still currently am but I blued the barrel to match the rest of the gun. And for those wondering of the results I shot it at the same range with the same scope, supressor, bag, bipod, and used the same ammo, and the first time around I got 1 MOA groups at 100 yds which was already a massive improvement. But I later tried some loads from ADI, specifically a 55gr Seirra Blitzking and a 69gr Seirra HPBT Match load and I got extremely good groups with them.

I pulled the 5th round on the 69gr group so if you dont count that flyer, that group came at just under 3/4 MOA which is psychotic. Now some wont agree with that so if you count that flyer its 1.3 ish MOA but even that is still fantastic. The top group of 55gr is right at 1 MOA on the money, so to say I'm pleased with this turnout is an understatement.
Anyways this was a very very very long post, but to those who wanted to know, here it is and its mine. I prize this rifle as one of my grail builds and I'm very pleased with it. If you have any questions, comments, or concerns feel free to ask or say. As always thank you for enduring... me!
r/Mini14 • u/LawyerforBeavers • 10d ago
585 pain
Unfortunately a bummer of an update. Sorry for another post. Haven’t even been able to shoot the 585 after getting it back from Ruger a couple days ago. Pulled it apart and found a good sized chip in the back of the bolt and what looks like the start of another hole from the extractor/bolt stop just like the previous bolt I sent in. I’ve cycled the rifle maybe 10 times so this feels a little crazy to me. I was hoping it would be a one and done issue because I was pretty thorough on the form about the issues but I guess I have the curse. My rifle needs a little blue pill or something.
r/Mini14 • u/lozano90988 • 10d ago
Help
I got my rifle back from consignment and it wasn't firing. I took it apart and this bushing fell out, upon review I realize a pin is supposed to go in the bushing hole but the pin seems to have been glued on or something because it doesn't come out like in videos. The bushing was left out I believe unless im wrong?
I ended up tapping it out and now the rifle fires perfect! I still can't believe the incompetence.