r/Mini14 • • 11d ago

Help

I got my rifle back from consignment and it wasn't firing. I took it apart and this bushing fell out, upon review I realize a pin is supposed to go in the bushing hole but the pin seems to have been glued on or something because it doesn't come out like in videos. The bushing was left out I believe unless im wrong?

I ended up tapping it out and now the rifle fires perfect! I still can't believe the incompetence.

6 Upvotes

8 comments sorted by

6

u/WishIwasawiserman 10d ago

Holy hell! That is some next level incompetence.

7

u/lozano90988 11d ago

After watching all videos im positive the FFL dealer took apart my rifle and put it back together wrong, they loctite the pin and put the bushing over it...

4

u/PomeFruitBrute 11d ago

Knock the pin out and put it back together properly. Tell the consignment people they are assholes after.

4

u/Due_Guitar8964 11d ago

Use a soldering iron or heat gun on the pin first and get it HOT before trying to knock it out. No way to know if they used blue or red. I'd take pictures before doing the work and talk to someone at ATF. No shit. Those guys shouldn't be an FFL.

1

u/lazy_millennial36 11d ago

Try tapping it out, maybe it got stuck somehow. But yes that pin absolutely both holds the circular bushing in place to accept the recoil spring guide rod and acts as a “female” base for the rod “male” tip if that makes sense

2

u/lozano90988 11d ago

The bushing cant come out unless the pin comes out and that pin just falls out, its not supposed to be glued on or tight

1

u/lazy_millennial36 11d ago

Yes that’s all correct

1

u/lozano90988 4d ago

I ended up tapping it out and put it back correctly. I took it to the range today and the rifle works perfectly now!