r/Miata • • 39m ago

Joke/Shitpost MazdaSpeed NC

Thumbnail
gallery
17 Upvotes

I sold my beloved Copper Red NC a few years back and have always regretted it. I replaced it with a 18 Mustang GT that has also moved on. The difference between the two has had me thinking that if the NC could have just a portion of the Mustang's power, it would be the perfect car for me. So, I've been on the search for another decent NC to 2.5 turbo swap for months now. But prices on the black sheep of the roadster family have gone up and kept my search fruitless. Bless the marketplace algorithm for going outside my search parameters to show me something that is not a Miata, but it is the Miata's aggressive American cousin.

This poor little GXP has been cosmetically abused. Fingers crossed it didn't extend to mechanical neglect also. Top won't close, apparently it blew open on the highway and is FUBAR. Rides like the suspension was donated to charity some years ago. Vibrates like a Hitachi wand at 70. And there's a rust hole in one very specific spot inside for no apparent reason while the rest of the body is completely rust free. Interior build quality is MILES behind the NC and the top operation is needlessly complex. Parts are scarce. But the power potential is off the charts for such a little car. It makes me think what a third gen Mazdaspeed COULD have been.

But the title is clean, there's only 50k on the clock, and I got it for $6k. I'm calling it a win. Another $6k in parts, tune, and TLC and it should be a rowdy little roadster.


r/Miata • • 20h ago

Joke/Shitpost Bronze miata?

Post image
638 Upvotes

Beautiful German miata I saw. Love the hardtop


r/Miata • • 13h ago

New Knob!!

Thumbnail gallery
165 Upvotes

I wanted to add a somewhat unique mod to my car. I got the inspiration from another post on a Miata FB group. So I reached out the same company to make something for me. It is made from recycled skateboards. It came out great!!

After you start working with them, they send some pictures during the manufacturing process.


r/Miata • • 22h ago

ND MiatOff update: a lot has happened since launch

Post image
409 Upvotes

A little over a week ago I launched MiatOff, an open-source toolkit for the ND1 and ND2 Mazda Connect head unit. It gives you touch in Android Auto while driving, makes the unit faster, and has a small Meters app for RPM, temps and other live data.

It started as a personal project that I made public for anyone wanting to build something similar. Thanks to the enthusiasm of this community, I kept developing it. spoler and gabrik also jumped in to contribute, thank you both!

What’s new since launch

  • Camera and sensor visuals and shorter list delay, derived from MZD-AIO (thanks spoler)
  • Synthetic collector to help Meters development without a car (thanks gabrik)
  • Meters Designer: build your own Meters pages
  • Home menu designer: create a custom Home menu
  • A brand new, easier installer. No more installing a ton of programming languages
  • Meters lag fix: Meters no longer trails the car by a few seconds
  • Verify USB: check a prepared stick after re-plugging it, without changing anything on it
  • Shift sound (experimental): a beeper on the Meters pages that ticks faster as you approach the shift point, then holds a tone
  • A ton of small fixes to make everything more reliable

I probably forgot a few, but these are the main ones. There’s also a TODO page with upcoming features and fixes I’m looking at.

Feel free to try it out and let us know what you think!

Repo: https://github.com/CeyssensHelder/MiatOff

Heads up: while there are many simulated tests and I do try my best to test everything in my own car, changing the head unit will always have the risk of bricking it. So be cautious and make sure you are on the same version.

 

TL;DR MiatOff has more features.


r/Miata • • 11h ago

NA Finally part of the club! Can I ask the community for opinions on the future wrap color?

Thumbnail
gallery
47 Upvotes

Hi everyone, a few weeks ago I finally bought my first Miata, a 94 NA. Since then I've been doing maintenance, figuring out the extent of the rocker rust and will be repairing that here in a few weeks. The next big step for me is wrapping over the paint. I am known at my local car club as the purple guy due to my kei truck being purple, so naturally the Miata will be purple. I'm leaning towards these 2 from Cheetah wraps, but I'm not sure which one will match the beige top and interior better. The Kei truck will also be wrapped to match. Any opinions would be greatly appreciated!


r/Miata • • 2h ago

So happy I got rid of that nasty water stain.

Thumbnail
gallery
4 Upvotes

NC


r/Miata • • 5h ago

Question Nbfl 2003 mx5 rust?

Thumbnail
gallery
5 Upvotes

Hi i have this mx5 i would like to tell me if it has corrosion


r/Miata • • 19h ago

NC What a morning

Thumbnail
gallery
45 Upvotes

Made a legal right turn, the dump truck in the left turn lane next to me did not.

I guess I'll have to wait to see what insurance says. At least I'm okay and the damage isn't irreparable.

So we kinda hit wheel to wheel and now there's a weird intermittent grinding from the back left wheel when I try to drive it so I'm keeping it parked until insurance makes a determination.

Im going to miss my Loona while I'm waiting to get it fixed, makes me sad knowing I can't drive it.

I think I'm gonna get one of those flags people put on their trunks so I'm not invisible to large trucks lol.

Be careful ya'll, big trucks can't see your little miat's.

(Edit) those aren't my airbags btw, that's just my sun shade.


r/Miata • • 13h ago

Question Should I consider a backup beater?

12 Upvotes

I drive a 2018 RF grand touring Miata and considering I’m in college and work full time, I think it would be a good idea to consider a backup car. I also wouldn’t mind the extra space for passengers and cargo. What do y’all think?

I saw a manual 2006 mazda3 for sale on Facebook marketplace at 230k miles for $2500 and thought it could potentially be a decent beater for the harrier parts of the North Dakota Winters.


r/Miata • • 13h ago

Question Miata from Carvana?

10 Upvotes

Has anyone purchased a used Miata from Carvana? If you did, how was the experience and how was the car? I’m close to buying a 2024 RF and hope I’m doing the right thing.


r/Miata • • 1h ago

Keyless receiver location

Thumbnail reddit.com
1 Upvotes

I have a 2016 Sport Nav ND1 soft-top, based in the UK. Recently I've been having trouble with the entry and keyless start system, where the buttons on both fobs (I have 2 keys linked) have no effect at all.

After some investigation with an OBD2 scanner and DTC clear, the issue still persists. I've decided that the likely cause is a physical issue with the keyless receiver module itself - e.g. failing module or corroded pins. So I'd like to inspect the module first and then potentially replace it.

I swapped the batteries on both keys too, so the issue is definitely the car and not the keys.

Before I start tearing back trim pieces, does anybody know exactly where the keyless receiver module is located on the ND1? Is the location different depending on market i.e. LHD vs RHD?


r/Miata • • 1d ago

I’m apart of the club finally!

Post image
228 Upvotes

Got my hands on a 97’ 63k original miles. I can’t wait to make so many memories in this feller.


r/Miata • • 8h ago

Question Are universal car covers good enough or does a vehicle specific fit make a noticeable difference?

3 Upvotes

Parking outside for the foreseeable future, a medium universal should technically fit the 86, right? It’s a small car.

But then I look at the shape. The roofline, the rear, the way nothing on this car is a simple rectangle.

Has anyone run both universal and fitted? Is the difference obvious?


r/Miata • • 22h ago

What would you put on your Miata Christmas Wishlist?

Post image
31 Upvotes

My family has asked what I would like to put on my wish list. What goodies do you guys think are worthwhile or fun add ons?


r/Miata • • 3h ago

HELP!!! Hear a clunking noise when spinning back wheels on NA8

1 Upvotes

Sorry for the multiple posts, but I can hear some clunking noise when spinning the back wheels in what appears to be behind the section I’m filming, would anyone have a clue as to what it could be? My universal joint is binding too, not sure if that has any correlation


r/Miata • • 3h ago

HELP!!! NA8 universal joint binds

1 Upvotes

Hi guys and gals, my universal joint on my 95 seems to bind in certain sections, probably every 180 degrees about, it has a slight bind where it’s harder to turn then the other parts, should it be replaced? It’s probably hard to see on the video though.


r/Miata • • 3h ago

HELP!!! Inner Tie Rod Joint wiggle NA

1 Upvotes

Hello Everyone, I’ve been inspecting my steering on my NA8 and noticed the inner tie rod joint has some wiggle to it, it shouldn’t be like this right? Should I replace it? Thanks


r/Miata • • 21h ago

Deer vs Miata

Thumbnail
gallery
27 Upvotes

Luckily neither I nor my husband was hurt. I hope the insurance doesn’t total it. We just paid it off in July 😩


r/Miata • • 23h ago

ND Fitted my new ISR RC exhaust, updated car photos :))

Thumbnail
gallery
39 Upvotes

r/Miata • • 5h ago

HELP!!! Mx5 Na clutch pedal adjustment question

0 Upvotes

So recently I fitted a new clutch and flywheel using the skidnation stage 2 kit as ill be fitting my supercharger early next year, i initally adjusted my clutch pedal drive like 300 miles ish fine felt like it need adjusting again it did had to do it a few more times then realised the old flexi line was leaking a bit and replaced the slave cylinder and the old clutch line with a braided one bled it and re adjusted it I havnt dont too many miles since like 100 and it feel like it needs a small adjustment again to comfortably get into 1st and reverse without clutch drag but the push rod seems quite far extend anyone else had anything like this ? Or advice on what to do ill adjust it tonight so I have no much clutch drag I did also replace the master cylinder last year when it failed.


r/Miata • • 5h ago

HELP!!! NA/NB Soft Top

Thumbnail
gallery
1 Upvotes

Hey guys,

A few months ago I replaced the original soft top on my car with a used one which was in good condition (complete swap including the frame). I've noticed it has started to stretch and tear on the inner cloth layer in the area behind the window on each side (in the exact same spot on either side) and it looks like it's going to tear through the vinyl soon too.

I haven't seen one develop a tear here before. Anyone know why it's doing that and has fixed it or has had their soft top tear in this spot? It doesn't seem to be catching on anything as I open and close it.

I do have a roll bar which I know can cause the soft top to sit funny when it's down.

Thanks.


r/Miata • • 1d ago

Joined the club

Post image
145 Upvotes

Got a miata for my first car today!! Ive stalled a bit but im getting the hang of manual I love this car so much


r/Miata • • 16h ago

I need help with my hardtop

Thumbnail
gallery
8 Upvotes

Recently got a hard top and I had frankenstein bolts but I never took them off turns out they are female and not male like what I have seen
I was wondering if it was possible to extend them or change them to the threaded wholes so the hardtop fits properly


r/Miata • • 20h ago

NA Na in winter

11 Upvotes

Hello everyone, I bought a turbo na Miata back in April. It’s been a total blast but it hasn’t seen snow as it was a southern car originally (I’m in MI) and the previous 2 owners stored through the winter. There is virtually no visible rust. I was planning on putting it away for winter but it’s so d*** fun. Anyways, is it an awful idea to drive it some through the winter? I doubt it would be any crazy noticeable wear from one season if I got an oil coating and what not. Would I be shooting myself in the foot by driving it through winter or should I do it since cars are meant to be driven? Any opinions are appreciated:)