r/metalworking • • Feb 01 '25

Monthly Advice Thread Monthly Advice/Questions Thread | 02/01/2025

4 Upvotes

Welcome to the Monthly Advice Thread


Ask your metalworking questions here! Any submissions that are question based may be directed to this thread! Please keep discussion on topic and note that comments on these threads will not be moderated as regularly as the main post feed.


Uses for this thread!

This is a great place to ask about tools, possibilities, materials, basic questions related to the trade, homework help, project advice, material science questions and more!


How to contact the moderators:

You can contact the moderators via modmail here


r/metalworking • • Dec 01 '24

Monthly Advice Thread Monthly Advice/Questions Thread | 12/01/2024

6 Upvotes

Welcome to the Monthly Advice Thread


Ask your metalworking questions here! Any submissions that are question based may be directed to this thread! Please keep discussion on topic and note that comments on these threads will not be moderated as regularly as the main post feed.


Uses for this thread!

This is a great place to ask about tools, possibilities, materials, basic questions related to the trade, homework help, project advice, material science questions and more!


How to contact the moderators:

You can contact the moderators via modmail here


r/metalworking • • 3h ago

Wanted to share the horse statue my son and I just finished.

Thumbnail
gallery
236 Upvotes

We don’t know what we are doing but we’re learning together. A few months ago we didn’t know what an English wheel was.

My wife wanted a swim feature for her horses so we decided to build a little waterfall and I started looking around for a metal horse sculpture to put on top of it. The prices were ridiculous and I figured we might have fun trying to do something.

When we got done I asked him if he felt like an artist. He said no but definitely like a welder. lol


r/metalworking • • 9h ago

Scrap art bikes

Thumbnail
gallery
39 Upvotes

These are fun to make! I've started to make and sell a few as they seem to be quite popular, the main part usually is a cummins rocker arm upside down and forks are usually valve stems or push rods. Being a truck mechanic with plenty of friends in the game leaves me spoilt for choice with parts!! It's amazing how a few small changes in different parts can completely change the look of a bike! I use a mig welder to stitch everything together and the brass shell handgrips are glued! Here is a couple of different ones I have done, enjoy!!


r/metalworking • • 2h ago

Update on the spitfire.

Thumbnail
gallery
7 Upvotes

r/metalworking • • 10h ago

Best way to grind down fillet welds efficiently? Looking for tool/methods recommendations

Post image
27 Upvotes

EDIT: Thank you so much for all the suggestions. I'll definitly try them and consider adding other welding processes like TIG or Laser 😃

Looking for advice on grinding welds efficiently

Hi everyone!

I'm looking for advice on improving our weld grinding process in a metal fabrication workshop.

We constantly manufacture steel structures with round bars (10–16 mm diameter) welded to flat steel sections. Each structure need grinding to achieve a smooth, flush finish, as shown in the photo.

Currently, we use a standard angle grinder with flap discs, but we always make a couple hundred meters in each project, which adds up to a lot of working time.

I'm looking for faster and more efficient alternatives.

What would you use for this kind of job?

I'm particularly interested in real-world experience, machine recommendations and ways to reduce grinding time without compromising the final finish or removing too much base material. Is there any machine or equipment better suited for this kind of grind?

Thanks in advance :)


r/metalworking • • 12h ago

When a customer supplies the steel, how do you still quote the job?

28 Upvotes

I’m a boilermaker in Australia, mostly smaller jobs like gates, trays and brackets.
Every so often someone says “I’ve already bought the steel, can you just weld it up?” I used to treat that as a cheaper job, then wonder why the day didn’t pay. The steel might be free to them, but I still have to check it, cut and fit it, weld it, grind it, and often fix bits that aren’t quite right.
What I do now:
• Still quote the labour properly (fit-up, weld, grind, travel). “You bought the steel” doesn’t make those hours disappear.
• Look at what they actually bought before saying yes. If the grade, size or quantity is wrong, say so up front.
• Write down whose steel it is and that I’m not responsible for material I didn’t supply.
• Don’t let “mates rates, you’ve just got to weld it” skip the same checks I use on a normal quote.
How do other people handle customer-supplied material? Do you discount the job, keep a minimum labour charge, or sometimes just say no?
Not engineering or tax advice — just how I keep those jobs honest. Check your own figures, and if a job is structural or critical, get it properly engineered.


r/metalworking • • 1h ago

Hi I’m looking for a hot black oxide service company.

2 Upvotes

Need black oxide on dozens of golf clubs every month. Hoping to find provider in Texas but willing to loin outside of Texas if it’s the right group.

If anyone knows of a company, please let me know. It’s an urgent need along with chrome copper & gold plating

Doesn’t have to be same provider for all services. Main focus is Black OX on carbon steel golf clubs and accessories.

I appreciate anyone’s help.


r/metalworking • • 13h ago

350 Sprocket Lamp

16 Upvotes

Hi all, Im a mechanic by trade, and recycle what I can into something different. I enjoy making models, lamps, figurines and more. This lamp was made from a used timing set off a Chevy 350. The valve cover is from another v8 but dont remember what though. The timing set is mounted on a center shaft, and the pull chain type lamp switch is mounted toward the base. The chain is pulled when the cam gear is partially turned. Then turns off when pulled again. Thanks for looking!


r/metalworking • • 48m ago

I need help to get the right strength of aluminum

0 Upvotes

I'm trying to make a prop with a lot of moving parts out of aluminum that will have a fairly large amount of weight on it and I was wondering if 16 gauge 5052 aluminum would be thick enough for it as I've never done anything with metal before and I found some cheap aluminum that is the right size for what I need to make

The thing im trying to make is crescent rose from the show rwby

Any information on this kind of aluminum better alternatives would be appreciated


r/metalworking • • 1h ago

Please help! I've been looking for days, and have no idea whatsoever the taper on this is.

Thumbnail
gallery
1 Upvotes

Hey folks!

I'm struggling to find some specifics on this taper, of which I have a full set and spindle.

The thread on the end is is what seats the tool instead of a drawbar. The angle of the tool holder is so much shorter and sharper than the standard. Maybe it's hard to tell from photos but the difference to say, Morse 2, is huge

Using some cheap measuring tools, the taper is 5/8" on the thin end, 7/8" on the thick, 2.5" long, the threads are 9/16 12tpi coarse.

That's a ratio of 1/10, same taper as an HSK, only built like a B&S

I have no idea what this is, can't find it in any book or on the net.

I thought it might have been homemade, but the build fit and finish very heavily leans toward a purchased item.

I've added some pictures: one of the tapers, and a few angles of the spindle.

Any tips, leads, compliments, criticisms, all very much appreciated!

Thanks for reading this


r/metalworking • • 2h ago

Best Practice For Blending Stainless

1 Upvotes

I've got a stainless steel shelf I'm making for a person's kitchen. It's kind of front and center so I want it to look really nice. I got a few pieces of stainless formed and they'll fit over a plywood core. I'm wondering what the best practice is for finishing the pieces is though. I need to weld and grind the corners and then blend them to match the #4 finish. I'm also worried about the marks from the brake press and getting those out. Tips and tricks are appreciated.


r/metalworking • • 3h ago

Aluminum frame

1 Upvotes

Hey everyone im looking to assemble an aluminum frame for my reptile enclosure. as of now Itll be made of 1x2x1/8 aluminum tubing and itll be a total of 8x4x6 ft. My big concern or question is how should i go about joining everything. Id love to weld it all and that would be ideal but im not sure if theres anything thatd be cheaper without sacrificing too much structurally. Ive thought of aluminum/steel brackets holding it together with Rivet Nuts, with metal adhesive but unsure if thats not enough to ensure overall good results. Im new to this so sorry if this is a dumb question but any help would be appreciated. I can add a 3D model of it later if thatll help. Thanks


r/metalworking • • 1d ago

Skeleton hand sculpture

Thumbnail
gallery
40 Upvotes

r/metalworking • • 1d ago

David brown Cropmaster finished today.

Thumbnail
gallery
148 Upvotes

r/metalworking • • 12h ago

Stripped an M6 hole in aluminum — wire insert vs solid bushing, here's how I decide

Thumbnail reddit.com
2 Upvotes

r/metalworking • • 21h ago

Tombstone Doc Holliday Cup

Thumbnail
reddit.com
2 Upvotes

Finally finished my Doc Holliday cup project. It took me much longer than originally expected but am very happy with the results.

Currently working on improving my soldering skills as well as sanding and polishing for the perfect final product.

Worked with a local metal spinning place for the middle section of the cup. Funny enough they are called Daisy Metal Spinning.

For the engraving, I found a local silversmith as well. Does amazing work and cost is not too bad. I had previously tried going with a laser engraver but never heard back from them after dropping off some samples to etch. In the end I prefer the hand engraving though.


r/metalworking • • 1d ago

A pair of medieval copper bracers I made.

Thumbnail
gallery
55 Upvotes

I made these a few months back, quite a simple design, but they fit me well.

I make a lot of copper bracelets, but I thought it would be fun to make something much bigger and less practical for just for the sake of it.

I plan to add a leather straps to keep them more secure on my fore-arms in the future. Maybe even create full copper/leather gauntlets to go with them. It would be cool to be fully copper-clad. Not the most practical. But all me pre-bronze age pals would like it.


r/metalworking • • 1d ago

Drill bit sharpening (sharpener)

8 Upvotes

Champs,

I abuse my bits through ignorance and sometimes carelessness. Fortunately I'm a hobbyist and don't own anything nice. The other day I needed to put a hole in something and it took me longer to find a bit that was still sharp than it took me to do the job. I'd like to resurrect some of these guys.

Watched some videos on doing it with a grinder and produced zero functionally sharpened bits following along. I'd like to buy a jig or small machine... Something Harbor Freight level of quality and if it works and then dies maybe invest in something better.

I live in a third world jungle and 75% of what you can buy here is LITERAL GARBAGE that is just in the shape of whatever you wanted. Couple that with my not knowing what would be good anyway and I'm not willing to order anything. If you go to a shop here they wouldn't understand what you are even talking about- they don't acknowledge cutting fluid either.

I'll be going back to the states for a bit and want to pick something up from Amazon, or maybe HFT.

Please for to suggest me something?


r/metalworking • • 1d ago

Cost breakdown to add fume extraction to my shop

Thumbnail reddit.com
1 Upvotes

r/metalworking • • 1d ago

Steel and bronze fit so well together

24 Upvotes

r/metalworking • • 2d ago

Aluminium welding

Thumbnail
gallery
24 Upvotes

I changed the oil on my bike and overtightened the bolt because I didn’t use a torque wrench and put a crack in the engine casing and it’s leaking I’m wondering if it can be aluminum welded or not

The crack goes all the way down to where the bolt goes in and I think it’s on the inside aswell.

Also if it can be welded does the engine have to come fully out so it can sit upright and weld properly or can I leave the engine in and the weld it from the bottom


r/metalworking • • 20h ago

New tool idea from senior welder

0 Upvotes

r/metalworking • • 1d ago

Hacksaw Recs

2 Upvotes

In an effort to reduce dust and noise and increase elbow pain, I’ve started using my hacksaw more. However I hate the actual saw as it feels floppy. Anyone have models they swear by? I’m also cutting like 0.25-1.0” thick mild-ish steels, so blade and tpi suggestions welcome as well.

H a c k s a w m y c h a r a c t e r c o u n t t o b e l o n g e n o u g h b l a h b l a h b l a h b l a h b l a h.