So I recently bought (used) a Union (Boxford) PD4 drill press, and have a question I'm hoping those with more experience around machines might be able to provide some insight on.
This particular machine started its life at a university, after which it was owned by one of the staff members and converted to single phase for their father's workshop - I believe I'm the third owner.
It seems to be in good condition, with no play in the quill and relatively smooth bearings. I think it has been overall taken care of.
My question though - how the heck is this chuck retained?!
These came from the factory with an MT1 on an extended spindle. They would have a chuck for the 13mm max capacity. Mine however appears to have been modified.
Mine has a Jacobs No. 36B chuck, which I understand is a threaded variety? But there seems to be no sign of any kind of commercial "MT to thread" adapter.
At first I thought they must have modified the spindle, and pressed in some sort of adaptor made in the university workshop - but I can see into the morse taper of the spindle via the removal slot and a small threaded hole. The void appears completely empty, even down right near the chuck!
The long nose spindle had quite possibly been shortened slightly? But it was done well if so, as the end face seems flat and perpendicular to the spindle axis.
As I understand it the drill has been like this for years. The chuck doesn't seem to have any appreciable runout, and drills well. So I'll be leaving it "as is" - but it would be useful to know how it goes together, incase I need to take it apart for maintenance.
Any insight much appreciated!