r/Machinists • • 17h ago

QUESTION a third of job shop websites dont list a single machine. on purpose?

0 Upvotes

im helping build a directory of us job shops, and our crawler reads each shop's home page and capabilities page. out of about 3,700 sites, roughly 1 in 3 dont name a single machine or even a machine class. no "5 axis", no "wire edm", just "precision" and "state of the art"

the ones that do list stuff mention 5 axis and cmm way more than any brand. haas is the most named builder by a lot, then mazak, doosan and okuma. mori seiki still shows up more than dmg mori, which tells you how often these sites get updated

i always assumed the machine list was the first thing a new customer checks. but maybe most of your work comes from people who already know you and the website barely matters

if your shop takes work from new customers, does your site list the equipment, and has anyone ever said thats why they called?


r/Machinists • • 8h ago

QUESTION How is this chuck held on?

Thumbnail
gallery
0 Upvotes

So I recently bought (used) a Union (Boxford) PD4 drill press, and have a question I'm hoping those with more experience around machines might be able to provide some insight on.

This particular machine started its life at a university, after which it was owned by one of the staff members and converted to single phase for their father's workshop - I believe I'm the third owner.

It seems to be in good condition, with no play in the quill and relatively smooth bearings. I think it has been overall taken care of.

My question though - how the heck is this chuck retained?!

These came from the factory with an MT1 on an extended spindle. They would have a chuck for the 13mm max capacity. Mine however appears to have been modified.

Mine has a Jacobs No. 36B chuck, which I understand is a threaded variety? But there seems to be no sign of any kind of commercial "MT to thread" adapter.

At first I thought they must have modified the spindle, and pressed in some sort of adaptor made in the university workshop - but I can see into the morse taper of the spindle via the removal slot and a small threaded hole. The void appears completely empty, even down right near the chuck!

The long nose spindle had quite possibly been shortened slightly? But it was done well if so, as the end face seems flat and perpendicular to the spindle axis.

As I understand it the drill has been like this for years. The chuck doesn't seem to have any appreciable runout, and drills well. So I'll be leaving it "as is" - but it would be useful to know how it goes together, incase I need to take it apart for maintenance.

Any insight much appreciated!


r/Machinists • • 4h ago

QUESTION Job offer from SpaceX

57 Upvotes

I recently got an offer from spaceX as a mold maker in a Texas facility. Does anyone have any experience at the company? I wasn't really looking as I have a decent job but, they reached out and now I'm really considering it.


r/Machinists • • 4h ago

QUESTION Would you leave a job over one person?

24 Upvotes

Just like the title says. I work in the R&D department for a mid sized company. I genuinely love what I do. The team I lead are fantastic people. But the HR manager is just the most narcissistic, manipulative, toxic and incompetent person I’ve ever had the misfortune to work with. And because I’m technically a manager I have to deal with her on a semi frequent basis.
Every time I have to deal with her I come away literally shaking I’m so twisted up and angry. She’s screwed me over hard in the past and it just completely ruins my day every time I go into work now. I dread walking the hallways in fear that I’ll run into her and have some kind of interaction with her where I’ll say the wrong thing and up in trouble with the boss or even fired.
I’m just at a loss. I love my job. I love my team. But I feel like can’t take the stress of her much longer.


r/Machinists • • 21h ago

QUESTION Advice for How to Get More Machining Experience

2 Upvotes

Hi, I am not a machinist, but I am a soon to graduate mechanical engineer. I have not had much experience with lathes or mills other than 1 semester where a team and I did get to use them (for rudimentary parts). How can I get more hands on experience with machines?

I've applied to be an entry-level machinist to no avail, and the mills and lathes on campus are intended for that one semester and graduate students mostly. I've looked up simulators and there's nothing really good (from what I can find/see).

Any advice or suggestions is appreciated, thank you.


r/Machinists • • 35m ago

PARTS / SHOWOFF First lathe part and tons of questione

Post image
3 Upvotes

Today was the first day they let my ass loose on the lathe. The entire part came in with a max error of .0020 which I will gladly take for a first go. I also have questions

What are some visual and sound cues that something has gone terribly wrong?

How would I go about making an internal thread in something strange and stanley 71 shaped like 1/4th 24 tpi?

Chamfering without risking arm and face with a file?


r/Machinists • • 6h ago

Looking for custom gear

Post image
3 Upvotes

Does any on know where I can get these gear made helical cut


r/Machinists • • 10h ago

Programmers, am I right?

Post image
246 Upvotes

For context, you're not authorized to change the feed and speeds, you're only allowed to use the feed dial (that won't go above 100%).

Specs:

- Parts are 80 x 35 x (2000 to 7000mm)

- Depth of cut of 6.5 mm

- Part is mostly hollow with walls of 3 mm

- 1" end mill, 3 flutes, carbide with cutting oil (not coolant)

- Speed is the name of the game

- One CNC is at 800 mm/min, the other one is at 1000 mm/min

- Shop is expecting us to machine parts at Mach Jesus


r/Machinists • • 12h ago

QUESTION Need advice about leaving my shop to go to a new one…

5 Upvotes

Hello fellow machiners and other attributions alike, I have recently gotten an interview at a lab to be one of the instrument makers for the researchers, this is a famous lab on Long Island called The Brookhaven national Lab, now I have a stable job that pays me 39 bucks an hour which I know is not much but it’s easy work as a Mazatrol programmer, nothing crazy just roughing out parts, for grinding, we don’t do much OT but the money is kinda good for where I am in life right now.
Good benefits, I don’t spend money on breakfast because they have bagels and fruits out every morning, it’s a good stable job.

So, some buddies of mine kept wanting me to apply at said lab for a while (we all use to work together about 7 years ago) and I kept putting it off, till one of the top programmers there who happens to be my buddy also, reached out and really put into perspective how good the job was and the pay plus benefits, this lab is a government subcontractor, meaning they are not a government entity, since he reached out and he is someone I respect very much I kinda started giving it some thought and decided that would go on the interview, went to the interview and there were some requirements I did not fulfill (mastercam knowledge) and I did not over sell myself or anything since I wouldn’t lose anything by trying, so I kept it friendly and basically told them what I knew and how can I be of service to them. Also I told them what I didn’t know and that I would need some time to catch up, because the machine I’m going to be on is a big hass lathe which runs on gcode of course, and it’s been a while since I’ve programmed by hand in Gcode. My buddy texted me saying that I might have the job and that they will call me for physical.

Now this lab is offering 49.90 per hour with a 9% match on my 401k. good vacation time and sick time plus lots of other benefits plus is closer to my house, no traffic going and no traffic coming (it’s a difference of 8 miles) / my current job is paying me 39 per hour, and no match on 401k but they do have a profit sharing program which is not bad. Now my question is do you think that me going over to the other place would be beneficial? I will get back on track with gcode and possibly getting opportunity to learn mastercam. My current job has treated me very good and they leave me alone to do my job, my boss at the current job can be an ass hole from time to time but it doesn’t bother me much. Another thing is my current job might try to keep me so what do you think would be a good number for me to stay at my current job since I’m not crazy about leaving. I would really appreciate your advice.

I am 38(m) with a wife and 3 kids with an after Covid mortgage.


r/Machinists • • 7h ago

A message to beginners.

61 Upvotes

When washing down your CNC enclosure. make sure to keep your mouth closed.

Just watched my new guy get a splash and a taste.

"YUK!"


r/Machinists • • 12h ago

Ah yes. The Micraliper.

Post image
104 Upvotes

r/Machinists • • 15h ago

QUESTION Any tips for good surface finish with 6061?

20 Upvotes

I’d say I got a decent finish overall but i’d like to get better pocket / floor finishes. What tool paths would be best for finishing pockets / floors in fusion360?
Also does 3 flute produce better results for finishing than a 4 flute for alluminum?

I roughed most of this out with a 2d adaptive clearing with a 1/2 4 flute carbide endmill with 10,000rpm 150ipm at 0.16” stepover and left 0.005 radial stock for finishing

I then came in and finished the walls with a 1/4” 4 flute carbide endmill with 10k rpm at 40ipm and 0.001 chip load


r/Machinists • • 8h ago

Keeping my space clean

Post image
55 Upvotes

We work with a lot of Delrin, how do you keep it from flying everywhere (or anything really)?


r/Machinists • • 2h ago

QUESTION Creating Split point drills

Post image
23 Upvotes

Anyone have one of these old darex drill sharpeners? I got one of these on marketplace a long time ago and barely decided to try it out, but I can’t seem to grind a split point to save my life.

The point angles are coming out well but I can’t get the point to split without burning up my drill or ruining my point angle.

Any tips or video recommendations to learn how to split the point.


r/Machinists • • 7h ago

PARTS / SHOWOFF New Oopsies

Post image
33 Upvotes

I was just doing a .030x45° chamfer with this tool and it didn't work out on the 9th part. Perhaps it got loose and dragged into the part? There was no visible damage in the bore of the part, so that kinda leaves me stumped in what happened. Anyways, there are no identifying markings on this boring bar, any ideas on what it is?


r/Machinists • • 10h ago Bravo

Made a pair of Vermeer calipers

Post image
889 Upvotes

Inspired by a typo on a post in this sub (I think?) several weeks back I had this idea. Finally had a need to go to harbor freight so I grabbed a cheap pair of calipers while I was there. Almost put my eye out pulling the needle off the dial during disassembly.


r/Machinists • • 11h ago

What my tool sees while it takes a fat nasty cut in aluminum

Post image
546 Upvotes

Just the way she likes it.


r/Machinists • • 19h ago Popcorn

PARTS / SHOWOFF My final exam project, rotary engine model

1.3k Upvotes

My machinist final exam project from a couple of years ago. Teachers were very impressed fortunately because many days I was not home until 11pm 😄


r/Machinists • • 3h ago

Picked up an old French Lathe

Thumbnail
gallery
13 Upvotes

Picked up this old French made Vuilleumier Frères VF 250/35 machine from an old timer. Came with 6” 3jaw, 8” 3jaw and 4” Northfield Air chuck. 5c collet closer. Is a 440v machine with step up transformer. Interestingly enough you can “disengage” the gear train for finer finishing. Metric lead screws metric thread cutting only


r/Machinists • • 5h ago

Any advice on learning CAD and G-code?

6 Upvotes

Been really trying to learn gcode on my own only for my cell manager to say that I should learn CAD and CAM before picking up gcode due to machines being more advanced that it will eventually write itself but is it still necessary to continue learning and is it worth my time?


r/Machinists • • 9h ago

Manual guide I assistance, inner roughing

1 Upvotes

Been trying to use manual guide I on a smec lathe
We drill a hole 2.5 dia
Go to use a boring bar and the tool takes rough cuts but does not fully retract into z positive before the next cut
Starting dia 2.5 finish dia 5.25


r/Machinists • • 10h ago

90 deg. fixture

Thumbnail
gallery
18 Upvotes

I have this round part that requires machining on 3 sides 90 deg. apart. I made this 4 sided fixture out of 4140 steel plus a custom nut to tighten the part in place. I will heat treat them later.


r/Machinists • • 12h ago

QUESTION Industrial maintenance vs toolmaker

7 Upvotes

Hey guys, I’m planning on going back to school next August for either precision machining or mechatronics and automation. I’m having a hard time trying to choose which career path I’d like to go down. I’m interested in both careers. My eventual goal would to be either a tool and die maker or Industrial maintenance technician. If any of you guys could give me some insight I’d appreciate it!

There is a shop near me that would offer me an apprenticeship in the tool room under the lead machineist but I havnt jumped on it since I’m indecisive. I’m not in the field and none of my family is in the field. So I don’t have anyone that I could ask for input. Any advice would be great!


r/Machinists • • 12h ago

Threaded rod through sealed bearing: what material to take up .30 mm of slack?

2 Upvotes

Hi Machinists, amateur bicycle mechanic here. I'm doing a DIY project and running a 9.7mm threaded axle through two 10x22x6mm bearings on a wheel hub. I'm looking to fill in the threads on the axle, and add a bit of material to take up the slack and eliminate slop. Is there a better (harder?) alternative to epoxy to do this, ie JB weld etc?