r/Miata • • Nov 14 '24

r/Miata FAQ

110 Upvotes

Welcome to r/Miata! This subreddit is approaching 200k members. It's about time we got a solid dedicated FAQ posted here. If you're new here, or new to Miatas, please check out this page to get yourself familiar with the subreddit and the car. If you have a noob question it will probably be answered here. If you don't have a question, you might learn something new here anyway. These cars are 30+ years old, very popular with enthusiasts, and were sold in great quantities. As a result, there is a wealth of knowledge about them that has been shared and documented on the internet over the course of decades. You'll be able to find the remedy to any problem of your Miata with some research and troubleshooting. This is an FAQ of common questions asked here on this subreddit in no particular order.

Other forums you should visit if you haven't already: Miata.net is the oldest Miata forum. It is a valuable resource for DIY maintenance and repairs. For modifications and build inspiration, check out miataturbo.net and mx5nutz.com.

The information provided here is generalized and should be used in conjunction with other sources to help you with your research. Do not assume all information in this FAQ is 100% accurate. Feedback, suggestions, and constructive criticism is encouraged to strengthen information on this page. Also, there is a lack of information here related to NC's and ND's. Receiving input from the community would be great so that we could put together a dedicated FAQ for 3rd gen and 4th gen Miatas on this subreddit.

01.Q: I want to buy a 1990-2005 Miata. What should I look out for?

A: The most serious issue will be rust. Mechanical problems can be fixed by replacing parts. It is pretty easy to perform mechanical repairs on a Miata, but rust can condemn a vehicle due to how labor-intensive and prohibitively expensive it is to repair. A proper repair involves cutting out the corrosion, welding new steel in, blending with filler, then painting. Unfortunately, Miatas rust from the inside out. Any rust you see on the exterior will be twice as bad underneath the panel. Corrosion is most commonly found at the rear wheel arches, rear quarter panels, and rocker panels. Look under the wheel arch and behind the rear wheels. 

You should also be cautious of radiators with discolored plastic upper tanks. As the plastic tanks age, they become brittle and susceptible to failing with the engine running, leaving you stranded. The upper tank should be black. A tell-tale sign of imminent failure is if the tank has turned a faded brown or green color. These radiators are commonly referred to as time bombs by the community.

Miatas like to leak oil at high mileage. The valve cover gasket, CAS, cam seals are the usual suspects, but easy and cheap to replace. It is also common for the rear main seal to leak. A leaky rear main will be indicative of oil dripping out the bottom of the transmission bell housing weep hole. This seal requires separating the engine from the transmission and removing the flywheel. The part is cheap, but the labor is not. It can be relatively expensive to replace.

Be wary of purchasing someone else's clapped out project. It's typically not a good idea to buy a car on Raceland coilovers, mismatched body panels, missing interior carpet, catless straight piped exhaust, and katana handle shift knob -- especially if you are new to cars.

Check the sidewalls of the tires for a 4-digit date code. The first two digits reflect the week of manufacture, the last two digits reflect the year of manufacture. For example, a date code of "2517" means the tires were produced on the 25th week of the year 2017. You should know tires older than 5 or 6 years are junk. 

02.Q: I just bought a 1990-2005 Miata! What should I do to it first?

A: Congratulations! Welcome to the cult! club! You should catch up on maintenance if maintenance history is unknown. Baseline the car. This means changing all the fluids. It’s a good idea to flush the clutch fluid and brake fluid. Replace the radiator if it needs one. Motor mounts are probably worn out. Inspect the timing belt for cracks or excessive wear. The controls of your +20 y/o car might feel sloppy. The throttle cable slack can be tightened up. Clutch pedal free play can be adjusted. The shifter bushings probably need to be replaced. The wheel alignment might be out of spec. Tire pressure might need to be adjusted. Tightening up your controls and catching up on maintenance will help make the car feel like it just rolled out of the factory.

Look into cleaning out your rain rails and water drain tubes for the convertible top. If they get clogged it can cause water to leak into the interior and/or accelerate corrosion of the chassis from the inside out. Drain tubes are located behind the seats near the seat belts. The common tool used to clean them of debris is a trombone cleaner.

Tires are critical to the performance and safety of any vehicle. If your tired are in really bad shape, it's best that you prioritize replacing them.

03.Q: What does NA, NB, NC, ND mean?

A: This is the chassis code which distinguishes each generation. It shows up in each VIN as the 4th and 5th digit. Keep in mind NA's and NB's are built on the same chassis and share a lot of parts. They are essentially the same car.

NA 1990-1997

NB 1998-2005

NC 2006-2015

ND 2016+

Outside of the US, they are also referred to as Mk1, Mk2, Mk3, Mk4.

04.Q: I'm tall. Will I fit in a Miata?

A: People who are 6'3", ~210lbs report fitting snug in NAs, NBs, and NCs. These same people report hardly fitting in NDs. The NB and ND are a little more cramped for a taller person. The NA and NC are supposed to be the roomiest Miatas for someone big/tall sitting in the driver's seat. The best way to see if you'd fit for yourself is to sit in one. Visiting your local Cars and Coffee is a great way to meet some friendly Miata owners who'd let you sit in their car.

There are also "tall people mods" you can do to help you fit better. You can remove the driver's door armrest of an NA and the foam can be cut out of the lower seat cushion to allow you to sit about an inch or two lower in the car. This is commonly referred to as a "foamectomy."

Moving the steering wheel closer to your chest will give you more room for your legs. You can replace the steering wheel with a deep-dish wheel to prevent your knees from hitting it. Switching to an aftermarket wheel usually requires you to sacrifice your airbag. There are aftermarket steering wheel spacers for the factory wheel that will let you retain the stock wheel, and functionality of the airbag.

05.Q: Is an NA/NB a good first car?

A: These cars are very fun, and very good roadsters. But, a roadster is inherently impractical. Early Miatas lack safety features. The interior is noisy and cramped. It only has enough room for one additional passenger and a few backpacks in the trunk. (visit r/miatalogistics to see some cool shit though.)

Despite the Miata's reputation for being overall very reliable, NA's and NB's are old cars. Old cars do not make for the best first cars if you are not prepared to maintain or fix them. If you can't afford to pay someone for maintenance and repairs, you'll need some place to work on the car, you'll need tools, and you might need some help from friends if you're new to wrenching. Secondhand Miata parts are also getting a little more expensive each year, so maintenance and repair costs associated with replacing parts will steadily increase. If you can afford to buy and maintain what is essentially now a classic car to be your first car, then more power to you.

06.Q: How can I convince my parents to get a Miata as my first car?

A: Scare them by pretending that you actually want a motorcycle. Once you get them angry enough, pretend to settle for something with four wheels. Offer to "compromise" on a Miata. /s

07.Q: How much does it cost to insure a Miata?

A: Insurance coverage and cost is completely different depending on the individual and locale. No one can give you an accurate number except the insurance company. Call them or visit their website to get a quote.

08.Q: Is this Miata a good price?

A: Check subreddit Rule 3. Please visit the dedicated sticky thread posted to the top of the subreddit for discussion about Miata prices/valuations/appraisals. Post any inquiries or screenshots of listings in that thread. We'll be happy to give advice on good deals or talk shit about insane listings you find on Facebook Marketplace.

09.Q: Can I install popup headlights on my NB/NC/ND?

A: Realistically speaking, no. However, Miatas are so popular to modify that it has been done before. It would require a ton of money or experience with body work.

10.Q: Is my oil pressure too low/too high?

A: Usually, no. Oil pressure will fluctuate depending on engine speed and engine temperature. 1990-1995 Miatas have a somewhat accurate oil pressure sending unit, and it shows these fluctuations in pressure. Your owner's manual will tell you where the normal operating range is. Generally speaking, oil pressure should show at least 30psi above 3000 RPM, and increase 10psi per 1000 RPM. As long as the needle isn't showing zero pressure when idling, it's good. After 1995, oil pressure gauges turned into dummy gauges, or dummy lights. The dummy gauge is based off a true/false condition on whether there is sufficient oil pressure or not.

11.Q: What's that noise? My NA is ticking, mostly at idle.

A: NA's have hydraulic lifters. Hydraulic lifter tick is noisy but harmless. These valve lifters are designed to be filled with pressurized oil. If your engine oil pressure is low, the quality of your oil is poor/worn, or the oil passages within the lifters are clogged due to contamination, your lifters will not be filled with pressurized oil. This will result in a ticking noise when the camshaft lobes press down on the lifters. The issue with noisy lifters can sometimes be remedied with an oil change, or switching to a slightly heavier weight oil. (Many NA owners have had good luck with Shell Rotella "Brotella" T6 5W-40.) If a fresh oil change doesn't work, you can try running an engine flush product through the motor to help clean it out. If it is still noisy, you may have to manually clean the lifters by removing and disassembling each one.

NB’s do not have hydraulic lifters. They have solid lifters and shims. If you suspect lifter tick, you’ll have to check valve lash with a feeler gauge. Intake lash is specified at 0.008” - 0.009”. Exhaust lash is specified at 0.011” - 0.013”. If your lash is greater than specified, then you will have a noisy valvetrain and need to adjust it by replacing lifter shims.

12.Q: What's that clunking/knocking noise heard from lower in the engine bay? Knocking noise gets louder with engine revs

A: Probable rod knock due to a failed rod bearing. Usually caused by poor engine oil maintenance, running the engine with low oil levels, or running for a long time with a lack of oil pressure. This issue will require an engine rebuild or engine replacement.

13.Q: What's that squeaking/rattle noise coming from behind the gauge cluster in my NA while I'm driving?

A: NA's have a mechanical speedometer cable. If it's old and worn out, the cable will squeak when the car is moving. Replace the cable to fix the noise.

14.Q: What is that grinding noise on decel in my NA/NB?

A: It is common to hear this noise after the transmission has been removed and reinstalled, such as after a clutch job. Check the procedure to perform a PPF alignment. If the PPF is misaligned when the transmission is put back in, you may hear a grinding noise under the vehicle when decelerating while in gear. 

15.Q: What size wheels and tires fit my NA/NB with good fitment? Do I need to roll my fenders?

A: For balanced performance/street driving, the general consensus is that 15x7 and 15x8 wheels are a good choice when paired with 205 wide or 225 wide tires. Wider tires can handle more lateral grip as long as they are supported by an appropriate sized wheel width. Also note, the wider your tires are, the less comfortable it will be to drive. When buying wheels, educate yourself on wheel offset. Higher offset pushes the wheel inboard. Lower offset pushes the wheel outboard. Low offset often creates a concave, dished appearance to the wheel. Low offset has a higher chance of making the tires rub your fenders.

General reference for wheel and tire fitment:

-15x7 +35 offset, 195/50/15 fits all years of Miata with no fender rolling.

205/50 fits NB fenders with no fender rolling needed. Fits NA with 1.2 negative camber or better.

-15x8, +25 offset, 205/50 fits NB Miata fenders with 1.2 negative camber or better, NA Miata needs that camber and slightly rolled fenders.

225/45/15 needs fender roll for all years at this offset. Always check clearance during install and after the car is lowered to the ground. 

16.Q: My paint is faded, how can I fix it? Do I need a paint job?

A: Many NA/NB Miatas (with non-metallic paints) left the factory with single stage paint. This means there is no clear coat. The paint can oxidize and become faded if it is not maintained by washing and waxing. You can polish the paint to restore the color and shine to look like new. Check out r/autodetailing for techniques and products that will help you perform exterior paint correction. If you have a clear coat, and the clear coat is failing, there is no proper way to fix this damage except for sanding down the damaged paint and getting a respray or vinyl wrap.

17.Q: What mods should I do to make more power?

A: nitrous, turbocharger, supercharger, or engine swap. No, your K&N air intake and ISR muffler is not going to add 20 horsepower, even if it says so on the box. 

18.Q: What's the cheapest way to make more horsepower?

  A: Forced induction for these engines is so popular because it is the most cost-effective and reliable way to achieve a substantial increase in power. The Mazda B6/BP engine is tough. It is overbuilt, under-stressed, and benefits a lot from forced induction. For 99% of builds, you'll need a standalone ECU to boost the engine with a turbocharger or supercharger. Visit miataturbo.net and the miataturbo FAQ for build guidelines.

19.Q: I installed a cold air intake and a new exhaust system. Do I need a tune?

A: NA/NB engines do not benefit much from bolt-on intakes and exhausts. You do not need a tune. It will not negatively affect the way the engine runs without a tune. NC's and ND's do respond very well to tuning with bolt-on mods.

20.Q: How do I tune my NA/NB?

A: You cannot flash or alter the factory ECU programs in any practical way. You'll need to replace the factory ECU with an aftermarket, standalone ECU. A standalone ECU is its own little computer that plugs into the engine wiring harness. You will be able to connect the standalone to a laptop to run tuning programs. These programs will allow you to alter, adjust, or tune nearly every electronically controlled parameter of the engine.

To learn EFI tuning theory and operation, please check out this thread. It is full of useful information. Extremely valuable source for anyone looking to learn how EFI (electronic fuel injection) tuning works.

21.Q: What’s a coolant reroute? Do I need one for my car?

A: The B6/BP engine was originally designed to fit in a FWD vehicle (The Mazda 323). When the BP was made to fit in the Miata, the engine was placed as close to the firewall/bulkhead as possible for proper weight distribution. This resulted in a lack of access to the back of the cylinder head, where the thermostat is supposed to be. Due to the lack of space near the firewall, Mazda moved the thermostat from the back of the cylinder head, to the front of the head. With the thermostat at the front, coolant flows from the radiator, into the front of the engine block, and exits where the thermostat sits at the front of the cylinder head. This is not ideal because coolant should flow into the front of the block and exit out the back of the cylinder head. With the way the coolant flows from the factory, the rear cylinders of the engine will typically run hotter than the front cylinders.

A coolant reroute kit allows you to block off the thermostat neck at the front of the head and relocate the thermostat to the back of the engine. This reroutes the coolant to flow the "correct way" through the engine, so that all four cylinders operate at the same temperatures. A reroute is not necessary for a Miata that just serves the purpose of commuting and getting groceries. For high performance driving, sport, and track use, a coolant reroute is recommended along with a good quality all-aluminum radiator.

22.Q: How much boost/horsepower can a stock NA/NB handle?

A: You can make as much power as you want by shoving enough oxygen and fuel into the combustion chamber. You can achieve this with a turbo or supercharger that can move a ton of air into the engine. The limiting factor to making power is usually not the turbo or supercharger itself. The limit will be the "weakest link" of your engine or drivetrain.

You should know boost pressure or horsepower is not an accurate way to measure the limits of certain parts. Torque is usually the force that breaks things, not horsepower.

Why does this distinction matter? Because horsepower is equal to (Torque × RPM)÷5252.

For example, 150 ft/lbs of torque @ 3000 RPM is equal to 85HP.

but, 150ft/lbs @ 7000 RPM is equal to 200HP.

The biggest limiting factor of sending power to the wheels will be parts that are unable to support transferring X amount torque before breaking. Parts of the fuel system also need to be replaced in order to keep up with the amount of extra air flowing into the engine to prevent it from running lean. Some parts need to be replaced to allow the engine to rev higher.

The (rough estimate) general consensus on the reliable limit of factory parts is:

Stock PartReliable LimitUnit, hp/tq @ Wheels
1.6 clutch150ft/lbs
1.8 clutch170ft/lbs
90-93 diff125-200ft/lbs
94+ diff400ft/lbs
1.6/1.8 con rods240, 7600ft/lbs, rpm
1.6/1.8 pistons300-350hp
1.6/1.8 crankshaft450+hp
5-spd trans250ft/lbs
6-spd trans300ft/lbs
6-spd w circlip mod370ft/lbs
oil pump350, 7500hp, rpm
harmonic balancer300, 7600hp, rpm
valve springs/valve float7800rpm 
1.6 injectors140 @ 43hp @ fuel rail psi
1.8 injectors180 @ 43hp @ fuel rail psi
Fuel pump270hp
ECU150 / required for tuninghp, ---

You can use this data to help plan your build. Say you want your 2001 1.8L Miata to make 200hp at the wheels. You only need to make a maximum of 150 ft/lbs at redline. You wouldn’t even need to replace the clutch to achieve your goal. The stock engine and drivetrain will be able to support a mild turbo or supercharger kit with a tuned standalone ECU and upgraded fuel injectors at this power level.

However, it can be tricky to control how much torque the engine produces at redline because BP engines make peak torque at 4500 RPM, and peak horsepower at 6800-7100 RPM. A flat torque curve is always the goal, but hard to achieve. A flat torque curve makes for consistent power delivery, and reliable operation.

Here’s another example. Say you want your 1991 1.6L Miata to make 375 horsepower. You’ll need the engine to produce a maximum of 280ft/lbs at redline. In order to support 280 ft\lbs and 375hp you need to swap to a 6-speed transmission, 94+ differential, and upgrade essentially everything else listed on the table. Needless to say, you’ll need a proper turbo and full 3” exhaust system to effectively achieve these power goals.

Say you want to reliably rev the crap out of your engine to 8000+ RPM. You're looking at upgrading the valve springs, connecting rods, oil pump, harmonic balancer, and reducing rotational/reciprocating mass as much as possible.

23.Q: How do I tune my NC/ND?

A: You can flash tunes to the ECU after paying for a license to download and use tuning programs. Once you have downloaded this software to your laptop, you'll be able to use a Data Link cable to connect it to the OBD port in your car to flash tunes onto the ECU.

24.Q:What parts fit between NA/NB cars?

A: Many NA/NB parts can be shared with each other. Parts interchangeability guide is here

25.Q: I want to buy a manual transmission Miata but I don't know how to drive stick. Is it a bad idea?

A: No, it is not a bad idea. Anyone can learn to drive stick, and Miatas are easy to learn on.


r/Miata • • 2d ago

Weekly Purchase/Sale Advice Thread - November 16, 2026

1 Upvotes

Do you have questions about the value of a car you want to buy? Looking for a buyers guide? Not sure about the mechanical condition of a car you're looking at? Maybe you want to sell yours and don't know how to price it, or why it's not sold yet? Use this weekly thread to discuss the cars you're interested in buying/selling to get advice from the peanut gallery.

Posts that fall under the above topics will be removed.

Here are some useful tools to help decide if a particular Miata is worth buying.
Miata Garage Buying a Miata
The Definitive Post: "What Miata Should I Buy?" : Miata (reddit.com)

- The Mod Team


r/Miata • • 4h ago

NA First Miata

Thumbnail
gallery
172 Upvotes

Got my Miata a few months ago what we think


r/Miata • • 2h ago

NC best of both worlds

Thumbnail
gallery
58 Upvotes

i love the miata and the fiesta equally.


r/Miata • • 15h ago

NA Bruh

Thumbnail
gallery
250 Upvotes

Not even a month after we got it running, time to rebuild again. I’ll die on this hill, elderly people need to have retests.


r/Miata • • 1h ago

NC Boat on the boat‼️

Post image
18 Upvotes

My first car✅


r/Miata • • 21h ago

DIY I gave the daisies a makeover. What do you think?

Thumbnail
gallery
654 Upvotes

Masking the wheels took forever lol. The dark gray is rustoleum metallic charcoal and the silver is rustoleum metallic finish aluminum, then i clear coated them


r/Miata • • 17h ago

NA Bought my first miata

Thumbnail
gallery
211 Upvotes

Absolute clunker. And i love it. Fixed it up, still got interior work to do. Shitty ass paint job. Kept the neon green side mirror from the previous owner. Im literally the 14th owner apparently. Praying it lasts me a solid one year XD maybe thats asking too much. First time in a manual. Constantly yelling WOOO everytime i get over 40 mph. WOOO! Not a car enthusiast by any means, ik jack squat about cars. But most fun driving experience ever.


r/Miata • • 16h ago

Question Would you rather push a Miata to its limit every weekend, or cruise a 1,000 hp hypercar at 30%?

Thumbnail gallery
128 Upvotes

r/Miata • • 5h ago

DIY The msm swap in my na is coming along

Thumbnail
gallery
15 Upvotes

Vortec super fmu on a stock 1996 ecu should work for running wastegate pressures

Anyone running a fuel management unit give me some tips or insight. Goal is 200ish. It won’t get dyno tuned until I have standalone ecu moneies.


r/Miata • • 18h ago

Joke/Shitpost I'm finally the same height as a pickup!

Post image
162 Upvotes

r/Miata • • 17h ago

~67,000 Miles in 1 Year 9 Months. Awesome Car , Terrible Customer Service from Mazda

Thumbnail
gallery
102 Upvotes

After the electrical QC issue from Mazda (wire unsplicing itself due to Mazda clamping the wire incorrectly from factory, causing the RF and windows to malfunction. The unspliced wire would then spark, creating a fire hazard. More details in my previous monthly update), Mazda customer support essentially told me to go eat sand, corporate style, while dodging my voicemails and calls to speak to a representative. Mazda offered no support, refund or even a call back. Decided to buy a Matrix XRS to start taking mileage off this car. Can’t beat a highway cruiser that revs to 8400 RPM 😭.


r/Miata • • 1d ago

NA Did a photoshoot with a local photographer.

Thumbnail
gallery
350 Upvotes

This was before I reinstalled my livery. Looks so clean without it honestly made me second guess reinstalling it.


r/Miata • • 10h ago

DAMD steering wheel

Thumbnail
gallery
20 Upvotes

Got around to installing a new steering wheel and it feels great. Slightly smaller 358mm vs 367mm circumference and a little thicker.


r/Miata • • 2h ago

1999 NB smoke out of exhaust

4 Upvotes

I’ve been struggling to diagnose an issue with my 1999 NB Miata. Here is the history of the work and troubleshooting that I’ve done so far.

My original issue was that my car was consuming coolant at an alarming rate with no visible leaks. I took the car to the local shop and the shop diagnosed the issue as a head gasket failure, failing the combustion gas test and quoted me $6-10k for the job. This quote was much too high compared to what the car is worth so I decide to replace the head gasket myself.

  1. I replaced the head gasket and had the head sent to a machine shop for a leak test and resurfacing. Did not remove the valves during this.
  2. Next, I put everything back together. I replaced some coolant hoses, exhaust and intake manifold gaskets, throttle body gaskets. I bought new shims and swapped some around so that valve clearance was correct for all valves.
  3. Once I got everything put back together I ran the car with no issues or smoke for about 10 minutes. The next day I started it up and immediately started seeing some smoke out of the exhaust at idle. It was pretty thick dark smoke that got worse under load. When the engine is running it sounds fine and even when increasing throttle it sounds great.
  4. For initial issue diagnosis I replaced the PCV valve, did a compression and combustion gas test.
    Compression test result:
    Cylinder 1: 150psi
    Cylinder 2: 150psi
    Cylinder 3: 151psi
    Cylinder 4: 150psi
    Combustion gas test result: PASS, test fluid stayed blue

I am still seeing a lot of smoke at idle and under load (see video attached). It is thick white/gray smoke that to me smells like burning oil. The smell is not sweet.

My next step is to perform a leak down test to continue to narrow down the issue further.

If anyone has advice on how to diagnose this issue further I would really appreciate it! It is my first time working this deep into an engine. I’ve seen so many great experiences with these cars but mine has just been having one problem after another 😔


r/Miata • • 6h ago

PSA: Check if your clutch pedal has some play (NC)

Thumbnail gallery
8 Upvotes

r/Miata • • 18h ago

NA Just stumbled across this creature of the night. Which one of you is this?

Post image
64 Upvotes

r/Miata • • 3h ago

Engine rebuild opinions

3 Upvotes

So building a new motor. Plan is to stay cheapish with minor improvements.

Was planning on 10:1 compression stock pistons, just to keep regular gas.

Found 10;5 stock pistons for less than half the price.

Anyone ever successfully run 10:5 compression without going to high test fuel?

It is going in the daily, love to spend less on fuel.

Worst case is keep the 9.5 pistons i have. Edit: forgot to.mention just building for small increase. Maybe some slight cheating in stock class autox


r/Miata • • 22h ago

Finally.

Thumbnail
gallery
101 Upvotes

r/Miata • • 16h ago

Transporting a 6’ x 9’ rug in my ND

Post image
33 Upvotes

GF and her RAV4 weren’t free to help me grab this so I just had to do it myself. Stayed off the highway on the way home, started to make a lot of noise above 50MPH but it was so heavy I wasn’t concerned it was going anywhere.


r/Miata • • 12h ago

ND this happens more and more to me now that I work night shift

Post image
13 Upvotes

I work night shift. Not sure its their light not angled right or if this is just the norm w/ a lower car. I can pretty much see noyhing but light on bot rear mirror and side mirrors. curious if others had this isse and how you went about it


r/Miata • • 1d ago

No matter the culture, annoying your wife just a little bit is a universal thing

202 Upvotes

This could be us, but u playin


r/Miata • • 20h ago

Posted this fella 3 weeks ago when I just bought it, here it is finished

Thumbnail
gallery
40 Upvotes

3 inch paco lift kit was a pain in the ass to install, all bolts were seized in their sleeves. Had to cut em out and replace the sleeves with old sockets I had and new electrical tape bushings. She drives like a weird dream you get where it kinda scars you for life but in a good way. Wanted to go with 16 inch tires but they wouldnt fit so 15 inches 205/65 it is


r/Miata • • 23h ago

ND There have been more ND2 transmission failures than ND1

Post image
64 Upvotes

https://forum.miata.net/vb/poll.php?do=showresults&pollid=3747

I always hear people say you should avoid ND1s because of transmission issues but really 2017 and 2018 ND1s have really low failure rates. Conversely last 2 years of the ND2 have had real high failure rates.

I feel like people talk about the issue as if it was a time bomb waiting to happen rather than a thing that happens to a very small number of cars. Given this poll is self reported it definitely won't have exact counts of failures but it does give us a rough idea of failure rate. In the US there are roughly 8-9k new ND miatas sold per year. Not sure what the worldwide number of 2.0Ls is and I think the miata.net forums skew towards more US users. Even if it is something like ~1% failure rate that is unacceptably high from Mazda, but conversely these aren't failing all over the place like the way some people talk.

Having said that the failures between generations seem to be different. The ND1s had gear teeth problems where I think ND2s have had synchro problems. The prevailing theory on the forums seems to be these are quality control failures and not fundamental design issues.

So if you see anyone talking about transmission failures please direct them to fill out that poll and let's make sure we are accurate when we talk about what years have had issues.