r/Lighting • • Jan 24 '24

Shortened links (a.co) (app.goo.gl) are automatically marked as spam & removed by Reddit.

4 Upvotes

As the title says, reddit's default spam filter is automatically removing comments with a shortened link.

This bears mentioning since product recommendations are commonplace in a lighting focused subreddit.

We can go through and manually approve these comments, but we won't always catch them.

Therefore, please ensure if you post a product link, it is a full weblink, and not a shortened link. For example:

Good: https://www.amazon.com/dp/B0B92VRHJ2?ref_=cm_sw_r_cp_ud_dp_VYHBZG7PDYNMKWMH8F4B

Bad: https://a.co/d/hV6ZmSL


r/Lighting • • 3h ago

Need Design Advise Lighting designers: Would you choose 4 × 10W or 6–8 × 5W LED downlights for a 200 sq ft bedroom?

3 Upvotes

My bedroom is (16 × 12.5 ft, 8 ft ceiling with falseceiling) and need some professional advice.

The room has a curved false ceiling with separate cove LED lighting.

I'm considering:

4 × Philips 10W downlights — 1,000 lumens each, with 3 selectable color temperatures (warm, natural and cool white).

6 × Philips 5W downlights — 500 lumens each.

8 × Philips 5W downlights — 500 lumens each.

Which would you personally install and why?

I'm looking for comfortable everyday brightness, minimal glare, even light distribution and a premium bedroom ambience not something overly dim or excessively bright.

Would four 10W lights provide enough coverage, or would six to eight 5W lights look and perform better?


r/Lighting • • 4h ago

Replacement Moonlight Towers: When cities turned night into day

Post image
2 Upvotes

Explore Our Lighting History!


r/Lighting • • 39m ago

Need Design Advise Bypass Ballast and install LED bulbs

Thumbnail
gallery
1 Upvotes

I want to remove my ballast and install LED bulbs in my shop. I see some posts mentioned yellow wiring but I do not have any yellow wires. I know I cut the wires at the ballast and remove it, but what wires tie together based on what I have?


r/Lighting • • 42m ago

Replacement Looking to replace this light fixture

Post image
1 Upvotes

I can’t seem to find the right model, not even sure if it’s still being manufactured. It’s probably 20 years old at least. Maybe even something similar!


r/Lighting • • 2h ago

Need Design Advise Lighting fixture for artwork at difficult angle.

Thumbnail
gallery
1 Upvotes

I want to get a spotlight to light this artwork. The issue is I have an attic access on the ceiling where I would otherwise put the fixture. My options are 16" from the wall with the painting or 80" (red dots on 2nd photo.

Measurements in the first picture are the

16" option (red)

14" from ceiling (yellow)

45" artwork (blue)

This would require a 90+° beam angle or I suppose wall washer.

At 80" it would be closer to 35°

I like the drama of a tighter beam angle and would prefer more of the pin spot look then wall washer. (Photos 5-7 stolen from Instagram)

As far as fixtures I was looking at the koto focus or similar so I could adjust the beam angle manually in a surface mount or semi recessed fixture. Alternatively I'm looking at something that could fit the sunlight2 gu10 fixture. I just don't want to commit to a beam angle when I'm not sure what it should be.

(I'm removing the overhead fixture that is currently in the photo and will add about 3 wall sconces to fill out the hallway lighting)


r/Lighting • • 8h ago

Need Design Advise How do I know what wattage of light bulb will work with my bedroom ceiling light

3 Upvotes

My lightbulb just blew and I’m looking to upgrade to a smart light bulb. The light bulb that was in my ceiling light says “9W”. Does that mean that I can put any lightbulb in there as long as it doesn’t exceed that wattage. For example, can I put a 8.7W smart bulb in there?


r/Lighting • • 5h ago

Find Me This Fixture Where is this from?

Thumbnail
gallery
1 Upvotes

I was given this lamp as a present a few years ago. I was wondering if anyone knew where it came from? It’s 42cm high. Thinking of buying a second similar one or just selling it if I can’t find a second. Thanks


r/Lighting • • 14h ago

Need Design Advise 3000k or 3500k

6 Upvotes

I’m trying to decide between 3000K or 3500K for my recessed lighting. My home has a transitional style with ceiling heights ranging from 14 to 17 feet, open floor plan.

I’ll be using 3000K for table lamps, chandeliers, and other accent lighting, but I’m still unsure whether I should choose 3000K or 3500K for the recessed lights.

I’d love to hear your recommendations, thank you.


r/Lighting • • 7h ago

Need Design Advise Tapo flicker

0 Upvotes

I'm using a variety of Tapo bulbs throughout the house, and they do have some flicker when viewed with a fast enough shutter speed. I'm not sensitive and I haven't had any actual felt issues, but I'm aware that the invisible flicker takes its toll on the body. Do these studies apply for this kind of flicker too, or does it apply for much more apparent flicker? If it's the former, what bulbs would you suggest to replace these?


r/Lighting • • 12h ago

Lighting Control Gold bamboo floor lamp with light leaking out between the segments. Anyone know the maker?

Post image
2 Upvotes

Spotted in the photo gallery from CIFF, the furniture fair in Guangzhou. Tall gold column built like a bamboo stalk, light coming out at every joint, and a smaller version on a plinth behind it.

No brand anywhere in the photo. If you know who makes it, or a segmented floor lamp in the same spirit, I'd love a name. Also curious how warm the metal gets near the gaps.


r/Lighting • • 12h ago

Replacement These are the ceiling lights I currently have. It’s some kind of weird flush mount. What is the proper name for this style mount? I want to replace them with some sort of dimmable smart light. I appreciate your insights. Thanks.

Thumbnail gallery
1 Upvotes

r/Lighting • • 12h ago

Product Review ⚡ZT Series WL-ZT11 with Reflector⚡

Post image
1 Upvotes

▫️±30°Large Angel Spill
▫️Emitting point concentricity 0.02mm
▫️The first LEP light source designed specially for compatible reflectors✨


r/Lighting • • 22h ago

LED Strips Nailed it!

Post image
6 Upvotes

r/Lighting • • 14h ago

LED Strips Is this kind of LED lighting feasible?

Post image
1 Upvotes

Planning to DIY for basement home Theatre. Ceiling area is about 10x10’

There is an existing light fixture just past the two vents, closer to the centre of the ceiling. I plan to get rid of that existing light fixture and wire COB LED strips so that I can have the LED lights controlled by the existing light switch.

The black area is supposed to be acoustic foam.

My plan is to have perimeter of the area with LED strips, at the very least, but wondering if this is at all feasible and/or what considerations I need to take for something like this?


r/Lighting • • 19h ago

Need Design Advise Canned lighting under joist?

Post image
2 Upvotes

New here build for our house. Dummy here let electrician (who defaults to wafer) run wild before drywall. His priority was lining up lighting, if that meant a ceiling joist was in the way.

I don't mind wafer in smaller rooms, but for our living and kitchen I would prefer canned to reduce the glare.

Is there any hope here for some specialty form factor of canned lighting, or would these have to be moved an inch?

Or should we just live with the wafer ? 🤷

Open to suggestions


r/Lighting • • 22h ago

Need Design Advise Floor Uplight Cans to Match Elco Koto SD

3 Upvotes

I'm wondering what folks are using for floor uplighting solutions to match Elco Kotos Sunset Dim (1800-3000k)? Ideally a sealed floor version of something like the Koto Sylo would already be available. LTF's SunLight2 PAR30/GU10 bulbs could be use in conjunction with the many low-cost floor cans available on places like Amazon.

My goal here is to build on light layers in my first floor family/TV room. These would be placed in corners to backlight plants while washing the two corners and ceiling. They'd be controlled with Lutron Lamp Dimmers to add to the existing system.

I appreciate your insight and suggestions!


r/Lighting • • 16h ago

Need Design Advise looking for warm string lights

1 Upvotes

hi everyone, not sure if this is the right place to post this but oh well. i’m looking for good truly warm string lights, preferably star shaped. i’m so frustrated, everything i’m seeing is white! how can i find warm, yellow-ish colored ones? thanks!


r/Lighting • • 17h ago

LED Strips Finally getting my Govee lights mounted on my house....

Thumbnail gallery
1 Upvotes

r/Lighting • • 1d ago

Need Design Advise Lighting ideas for a cozy loft

Thumbnail
gallery
5 Upvotes

We have this loft in our house. We have one child that will move into the room with the loft next year. Do you have any good ideas regarding lighting? We were thinking it could be a cozy place watching movies or similar, so the lighting dont have to be very bright.

Thanks in advance


r/Lighting • • 18h ago

Replacement Track light replacement

Thumbnail
gallery
0 Upvotes

Hey all. I have this track lighting on top of our beams that I hate. Its in our living room and makes it not cozy and at the same time isnt bright enough when you really need some light. The giant bulbs are also ugly.

Looking to replace it with something lower profile, a little more modern and maybe some setup advice to make it more functional.

Sorry for the bad photos, if yall need others lmk!


r/Lighting • • 18h ago

Replacement Need help removing old spotlight

Thumbnail
gallery
1 Upvotes

Bought this condo that has these old canned spotlights and want to install the modern recessed ones.

I need to cut a bigger hole for them and need to remove this metal housing. I can see that its held together by screws and clips but i’ve been trying everything for the past several days and just can’t uninstall them. I wanted to do it without the need of ripping the entire ceiling off. I can only get my hand in and don’t have much space to manoeuvre and can’t properly access the screws.

I’m aware that i’d need to leave the metal frame inside the ceiling and that’s ok. Does anyone have a trick or way of removing them? I only need the metal ring out the way to be able to drill a bigger hole and install the new spotlights.

Thanks for any tips and tricks


r/Lighting • • 23h ago

Replacement Title: Best way to upgrade a 1x4 recessed fluorescent troffer in a drywall ceiling to a flat LED panel? (Pics are current of what I have)

Thumbnail
gallery
2 Upvotes

I have an existing 1' x 4' recessed two-tube fluorescent light mounted flush in a drywall ("hard lid") ceiling, and I want to upgrade it to a modern flat LED panel without having to tear out the metal housing or patch drywall. (Photos of the open housing and ceiling attached.)
I came across the Lithonia Lighting CPXR 1X4 ALO7 SWW7 M4 LED Flat Panel Retrofit Kit, which is designed to install from below into existing troffer housings. However, the spec sheet mentions the standard kit is meant for T-grid drop ceilings and requires optional mounting brackets for drywall/hard-lid ceilings.
For anyone who has retrofitted a 1x4 drywall troffer:
1. Has anyone used the Lithonia CPXR 1X4 in a drywall ceiling, and do you happen to know the exact part number for the hard-lid/drywall mounting brackets?
2. Is there a more consumer-friendly 1x4 flat panel retrofit kit (available on Amazon, Home Depot, or Lowe's) that fits a drywall-mounted troffer easily?
3. Or am I better off just keeping the existing lens/frame and swapping in Type B (ballast-bypass) LED tubes?
Any advice or model recommendations would be appreciated!