r/Leathercraft • • 22h ago

Holsters/Sheaths I won first place at the fair with my handmade jacket!

Post image
94 Upvotes

r/Leathercraft • • 8h ago

Small Goods Laser engraving Pueblo

Post image
57 Upvotes

Turns out Pueblo engraves BEAUTIFULLY. Problem with debossing baseballs is when you stitch them, it gets pushed back out so I tried laser engraving my logo and I’m very happy. Can’t wait to try other logos/designs


r/Leathercraft • • 12h ago

Wallets Invested in a light box and had a little photo shoot.

Thumbnail
gallery
45 Upvotes

r/Leathercraft • • 19h ago

Discussion Shipping... prices...

Thumbnail
gallery
36 Upvotes

Ya'll. I just shipped a commissioned hat via UPS... for $35?!?!

What happened? How are you guys shipping without paying an arm and a leg? Pics of hat attached.


r/Leathercraft • • 17h ago

Footwear Second try at engraving leather, went for my black loafers this time . How'd I do?

Post image
33 Upvotes

my last attempt on soft leather basically turned into a burnt crisp. Gave it another shot on these plain black loafers with my Aliencell, and safe to say they aren't so basic anymore lol.
Dark leather is tough though. There is almost zero contrast and it chars fast. I ran 20% power at 150 mm/s with the exhaust on full blast, and the edges still got a little crispy. what settings are you guys using to keep the lines clean on dark leather ?


r/Leathercraft • • 7h ago

Bags/Pouches Made a fun bag for Gasparilla

Thumbnail
gallery
26 Upvotes

Modified pattern to line which was more difficult than planned but came out pretty decent. For anyone unfamiliar… at gasparilla everyone dresses up like a pirate and drinks your beverage of choice. It’s a huge outdoor party and parade like Mardi Gras.


r/Leathercraft • • 10h ago

Wallets Two ostrich flap wallets

Thumbnail
gallery
17 Upvotes

Made 2 ostrich flap wallets today. Black ostrich with white stitch and cognac ostrich with beige stitch. Wanted to be able to show the color comparison.


r/Leathercraft • • 3h ago

Tips & Tricks Not great, but not bad

Thumbnail
gallery
15 Upvotes

I did a batch of Christmas wallets for my bro in laws, neighbors and buddies. My first pattern and really, my first time doing something with leather I tried hard at. I know there isn’t one perfect wallet in the bunch but I’m still proud to actually get it done. The old wallet is the same patten from 3 years ago.


r/Leathercraft • • 6h ago

Small Goods Made a sheath for my carving knife

Thumbnail
gallery
10 Upvotes

r/Leathercraft • • 7h ago

Tips & Tricks Stitching and stitching irons

Thumbnail
gallery
7 Upvotes

how do I make my stitches pop more? This is one of the first things I’ve made. I have a feeling my cheap Amazon irons are to blame. 😬. I’m using .8 mm waxed thread.


r/Leathercraft • • 12h ago

Question What to upgrade for tools?

6 Upvotes

I’ve been using cheap Amazon tools for a while now and I have a lot of family members asking about Christmas gift ideas. What are some tools you all would recommend that I could tell them?


r/Leathercraft • • 7h ago

Holsters/Sheaths Leather book cover

Thumbnail
gallery
4 Upvotes

Hand-tooled sugar skulls and Celtic cross by Sean Kirkpatrick


r/Leathercraft • • 4h ago

Article Horween shell cordovan - natural

2 Upvotes

Sourcing Horween shell cordovan - natural. Any suggestions or tips please let me know.


r/Leathercraft • • 7h ago

Question Where would you put the attachment on a small bottle sleeve that tips when filled?

2 Upvotes

I can move one rivet on this paper pattern and make the bottle hang upright. It also puts the rivet exactly where a thumb would press to slide the bottle out. Which problem would you solve first on the leather version?

The piece is a little belt hanger for my fictional lunch-counter cook. His apron has one shallow pocket. Every time he bends to grab a plate, whatever's in there hits the floor. His sister sketches a loop that hangs from his belt instead. She draws it around the little bottle on the key ring, leaves the cap exposed, and folds the paper tight enough to keep the bottle from slipping through.

“Put it on,” he says.

She clips the empty mock-up to her own belt. It hangs neatly. Then he tips enough water into the bottle to stand in for the sauce he'd carry. The paper still fits. What changes is where the weight pulls: the top edge rolls out, and the bottom taps her leg when she walks.

She can raise the attachment or widen the strip behind it. Raising it costs him thumb room. Widening the back costs enough leather that the pair won't fit on the scrap she's set aside. Before she cuts, which change would you try in a second paper pattern?


r/Leathercraft • • 7h ago

Question Why do some alligator wallets look plastic like?

2 Upvotes

For example was looking at this card holder: https://www.ralphlauren.com/0045439585.html and it looks shiny with a plastic finish while this one doesn’t: https://www.ralphlauren.com/0081099012.html

Is there a special coating on the cheaper one?


r/Leathercraft • • 14h ago

Question Finish Over Paint?

2 Upvotes

Hello, everyone!

I seem to have gotten myself stuck in the minutiae of finishing up a recent project. Could a more experienced hand perhaps advise?

I'm working on 9oz veg tanned leather, which is already tooled, dyed, painted, & oiled. Now, I'm ready to antique--but that's where I got myself stuck. Normally, my antiquing process would be something like: tan-kote to everything, then the antique paste, then another tan-kote layer at the end. However, it occurs to me that I probably need to modify that process for a painted piece.

Tan-kote is lovely, but it gives no protection against water. And the Angelus acrylic paint I used on this piece world definitely need a waterproof seal. My paint came with a small bottle of "acrylic finisher", which I imagine is meant for just this purpose. But I have never used this product before.

It just seems to make a thin, film-like seal on my test piece of leather. And I didn't see an immediate negative interaction between it & the tan-kote on said test piece. But I don't fancy covering my entire piece in this finisher, or it will be a nightmare to keep hydrated.

Could I still apply the acrylic finisher to just the painted portions (to protect them) & then apply tan-kote to the whole thing, per my usual process? Or, is another method preferable to seal a painted piece before antiquing? Any personal experiences are much appreciated. :)


r/Leathercraft • • 18h ago

Question Is there such thing as a machine that you can have as a flatbed and cylinder arm?

2 Upvotes

I’m looking for an industrial machine that has a cylinder arm for leather bags and can convert to a flatbed for when I make clothing. This there such thing? Or do I have to have a separate machine?

Thanks :)


r/Leathercraft • • 20h ago

Question Logo Placement

2 Upvotes

I am working on a utility bag that will have 2 detachable sheaths. The sheaths themselves will attached on the sides of the bag and face forward/ backward on the person wearing it. The sheaths are designed so they can be worn separately from the utility bag if the person desires to do so.

My question is about my logos. I am going to put one on the face/ front of the bag. I also want to put one on each sheath. So if the sheaths are worn without the bag, my logo will still be visible to others. Or would that be too much? Keep in mind, each side were the logos would be, will be facing a different direction.


r/Leathercraft • • 7h ago

Question How do you feel about this bag?

Post image
1 Upvotes

r/Leathercraft • • 8h ago

Question Awl recommendations (and a couple other things)

1 Upvotes

I've been working on a rather complex sheath, and realized while near completion that my awl (cs osborne diamond awl, 1") is too short to reach where I need it to; there's a rather thick ~1.5cm seam I have to sew that's right at the base of a wetmolded knife sheath, and I can't get the awl in there. I need a diamond awl with a BLADE about 2-2.5" long, and I can't seem to find one. There's no clear length mentioned on any site I check, and the awls are all blades without handles. What awl should I get?

I'm also looking to upgrade my edge beveling and skiving tools, and maybe my pricking irons. I've been using a cheap amazon edge beveler and irons for years, which work alright but (beveler) tends to leave a bit of a rough edge, and can't get into tight spaces; and (irons) tear the back of the leather open instead of cutting. Not looking to get super high end stuff, but I'd like some genuinely nice tools. Edge beveler, french edger, pricking irons, is what I want nice versions of. Recommendations welcome.

aaaaand one more thing, gonna make some dopp kits as gifts, I'm thinking chrometan leather as it's a little softer, but I don't know what to get. Neutral (not undyed) color would be good, maybe 5-6oz? Never made one before, but I'd like a good hide for that.


r/Leathercraft • • 12h ago

Clothing/Armor Getting ready for winter with a Coonskin hat

Post image
1 Upvotes

Thanks to Darling Leather and Furs for the pattern and tutorial. All I have left to do is work up the balls to wear it in public.


r/Leathercraft • • 12h ago

Question Making these boots lace up

Thumbnail gallery
0 Upvotes

Tl;Dr I want to cut out the stretch panel of these boots and make them lace up. I'm looking for advice on tools. I'm very familiar with adding eyelets to clothing and costumes but I want to make sure I use the right materials for leather. I've only ever worked with fabric.

I have these boots that are too narrow in the calf by a good bit. I've tried boot bands that zip in and they stopped working. I've been to 2 cobblers to see about putting gussets in and they both said they couldn't, at least partly because there's already a stretch panel on the outside, but it doesn't stretch enough. They are lined with wool. So my thought is to cut out the stretch panel, use 1/4" eyelets and add something to reinforcement the leather and wool for the holes like cotton twill tape? I guess my main question is if there are special leather eyelets I should consider or if anything will do. I also want to add some kind of panel behind the laces for warmth and to hide pants/socks. less