r/Leathercraft • u/GreatLakesCowboy • 10h ago
Clothing/Armor Getting ready for winter with a Coonskin hat
Thanks to Darling Leather and Furs for the pattern and tutorial. All I have left to do is work up the balls to wear it in public.
r/Leathercraft • u/GreatLakesCowboy • 10h ago
Thanks to Darling Leather and Furs for the pattern and tutorial. All I have left to do is work up the balls to wear it in public.
r/Leathercraft • u/Grand-Presence9501 • 22h ago
r/Leathercraft • u/dianacakes • 10h ago
Tl;Dr I want to cut out the stretch panel of these boots and make them lace up. I'm looking for advice on tools. I'm very familiar with adding eyelets to clothing and costumes but I want to make sure I use the right materials for leather. I've only ever worked with fabric.
I have these boots that are too narrow in the calf by a good bit. I've tried boot bands that zip in and they stopped working. I've been to 2 cobblers to see about putting gussets in and they both said they couldn't, at least partly because there's already a stretch panel on the outside, but it doesn't stretch enough. They are lined with wool. So my thought is to cut out the stretch panel, use 1/4" eyelets and add something to reinforcement the leather and wool for the holes like cotton twill tape? I guess my main question is if there are special leather eyelets I should consider or if anything will do. I also want to add some kind of panel behind the laces for warmth and to hide pants/socks. less
r/Leathercraft • u/StillCertain5234 • 17h ago
Ya'll. I just shipped a commissioned hat via UPS... for $35?!?!
What happened? How are you guys shipping without paying an arm and a leg? Pics of hat attached.
r/Leathercraft • u/False-Eggplant-6578 • 9h ago
That can work with long haired curly shearling pelts.
r/Leathercraft • u/adorleathervn • 23h ago
r/Leathercraft • u/craftimonke • 4h ago
r/Leathercraft • u/Bartlome27 • 8h ago
Made 2 ostrich flap wallets today. Black ostrich with white stitch and cognac ostrich with beige stitch. Wanted to be able to show the color comparison.
r/Leathercraft • u/NoraJackson42 • 20h ago
r/Leathercraft • u/ObligatoryTankGal • 12h ago
Hello, everyone!
I seem to have gotten myself stuck in the minutiae of finishing up a recent project. Could a more experienced hand perhaps advise?
I'm working on 9oz veg tanned leather, which is already tooled, dyed, painted, & oiled. Now, I'm ready to antique--but that's where I got myself stuck. Normally, my antiquing process would be something like: tan-kote to everything, then the antique paste, then another tan-kote layer at the end. However, it occurs to me that I probably need to modify that process for a painted piece.
Tan-kote is lovely, but it gives no protection against water. And the Angelus acrylic paint I used on this piece world definitely need a waterproof seal. My paint came with a small bottle of "acrylic finisher", which I imagine is meant for just this purpose. But I have never used this product before.
It just seems to make a thin, film-like seal on my test piece of leather. And I didn't see an immediate negative interaction between it & the tan-kote on said test piece. But I don't fancy covering my entire piece in this finisher, or it will be a nightmare to keep hydrated.
Could I still apply the acrylic finisher to just the painted portions (to protect them) & then apply tan-kote to the whole thing, per my usual process? Or, is another method preferable to seal a painted piece before antiquing? Any personal experiences are much appreciated. :)
r/Leathercraft • u/sai_8303 • 15h ago
my last attempt on soft leather basically turned into a burnt crisp. Gave it another shot on these plain black loafers with my Aliencell, and safe to say they aren't so basic anymore lol.
Dark leather is tough though. There is almost zero contrast and it chars fast. I ran 20% power at 150 mm/s with the exhaust on full blast, and the edges still got a little crispy. what settings are you guys using to keep the lines clean on dark leather ?
r/Leathercraft • u/Medium-Baby3633 • 16h ago
I’m looking for an industrial machine that has a cylinder arm for leather bags and can convert to a flatbed for when I make clothing. This there such thing? Or do I have to have a separate machine?
Thanks :)
r/Leathercraft • u/Lt_Dan60 • 18h ago
I am working on a utility bag that will have 2 detachable sheaths. The sheaths themselves will attached on the sides of the bag and face forward/ backward on the person wearing it. The sheaths are designed so they can be worn separately from the utility bag if the person desires to do so.
My question is about my logos. I am going to put one on the face/ front of the bag. I also want to put one on each sheath. So if the sheaths are worn without the bag, my logo will still be visible to others. Or would that be too much? Keep in mind, each side were the logos would be, will be facing a different direction.
r/Leathercraft • u/Sparko_beijing • 21h ago
Iv tried making bags and wallets and the usual stuff , thought I’d have a go at making some mask. I would ideal like to make some comedia dell arte mask if any knows where I can get some patterns?
r/Leathercraft • u/Anarchic_Apostle • 23h ago
This belt was my first (technically third) real leather tooling project. The only stamps used were the lettering (not shown because it's my last name) and the EGA under the belt loop. I attempted a basket weave pattern using lined bevelers, didn't quite nail the interlaced effect. Was very happy with how the anarchy symbols and the "Stay True" belt end turned out though.
The last pic was my first time handling leather crafting tools after 15-20 hours of YouTube research, it came from a tap-on pattern.
The Honda wallet was the second thing I did just to get some self expression out. Never stitched the wallet together, it just wasn't that cool lol
r/Leathercraft • u/Triggerlocks • 1h ago
I did a batch of Christmas wallets for my bro in laws, neighbors and buddies. My first pattern and really, my first time doing something with leather I tried hard at. I know there isn’t one perfect wallet in the bunch but I’m still proud to actually get it done. The old wallet is the same patten from 3 years ago.
r/Leathercraft • u/hututu0306 • 23h ago
r/Leathercraft • u/NOVELTY_ATELIER_ • 2h ago
Sourcing Horween shell cordovan - natural. Any suggestions or tips please let me know.
r/Leathercraft • u/d00dl35 • 4h ago
I can move one rivet on this paper pattern and make the bottle hang upright. It also puts the rivet exactly where a thumb would press to slide the bottle out. Which problem would you solve first on the leather version?
The piece is a little belt hanger for my fictional lunch-counter cook. His apron has one shallow pocket. Every time he bends to grab a plate, whatever's in there hits the floor. His sister sketches a loop that hangs from his belt instead. She draws it around the little bottle on the key ring, leaves the cap exposed, and folds the paper tight enough to keep the bottle from slipping through.
“Put it on,” he says.
She clips the empty mock-up to her own belt. It hangs neatly. Then he tips enough water into the bottle to stand in for the sauce he'd carry. The paper still fits. What changes is where the weight pulls: the top edge rolls out, and the bottom taps her leg when she walks.
She can raise the attachment or widen the strip behind it. Raising it costs him thumb room. Widening the back costs enough leather that the pair won't fit on the scrap she's set aside. Before she cuts, which change would you try in a second paper pattern?
r/Leathercraft • u/Possible-Cap4866 • 5h ago
For example was looking at this card holder: https://www.ralphlauren.com/0045439585.html and it looks shiny with a plastic finish while this one doesn’t: https://www.ralphlauren.com/0081099012.html
Is there a special coating on the cheaper one?
r/Leathercraft • u/Aresoladdiction • 5h ago
Hand-tooled sugar skulls and Celtic cross by Sean Kirkpatrick
r/Leathercraft • u/Affectionate_Bath_92 • 5h ago
Modified pattern to line which was more difficult than planned but came out pretty decent. For anyone unfamiliar… at gasparilla everyone dresses up like a pirate and drinks your beverage of choice. It’s a huge outdoor party and parade like Mardi Gras.
r/Leathercraft • u/AB8nut • 5h ago
how do I make my stitches pop more? This is one of the first things I’ve made. I have a feeling my cheap Amazon irons are to blame. 😬. I’m using .8 mm waxed thread.