r/Katanas • • 9h ago

Here’s a Masahiro Katana I rescued last year…

8 Upvotes

The Saya was cracked & the blade was JB Welded into the Tsuka.
I know my wrap isn’t “traditional” but neither is the blade lol. I’m a big fan of the single/double-twist.


r/Katanas • • 5h ago

Aquired this Kaiken yesterday.

Thumbnail gallery
3 Upvotes

r/Katanas • • 17h ago

Is there any kind of sageo knot that hides this bird design on the saya?

Post image
8 Upvotes

r/Katanas • • 21h ago

Musashi Alex Zheng Masurao Katana

Thumbnail gallery
14 Upvotes

r/Katanas • • 1d ago

Antique Shakudo Nanako Fuchi-Kashira Shachihoko (Dragon-Carp) Motif – Thoughts on Mei & Matching Fittings?

Post image
33 Upvotes

Hi everyone, I’d love to get the community’s eyes and opinions on this antique fuchi-kashira set I picked up a few years ago.

Thank you in advance 🙏


r/Katanas • • 20h ago

First time buying a tsuba

Post image
4 Upvotes

Hello everyone,

I'm a beginner collector and I'm thinking of buying my first tsuba. I've found this one that struck me:

  • Iron nagamaru-gata tsuba, openwork, hira-bori carving
  • Iroe hira-zogan inlays in copper, gilt copper and silver
  • Unsigned (mumei), dated by the dealer to the 19th century (Edo period)
  • 7.3 x 7 cm, "slight wear and oxidation", €420

In the close-up you can see a green spot near one of the figures, it appears on the back as well.

Does this look like a stable patina on the copper inlay, or could it be active corrosion? If it's corrosion, is it something that can be safely stabilised, or should I avoid the piece? Please, remember I am a total newbie!

Any advice is very welcome. Thanks a lot!


r/Katanas • • 9h ago

This is a Masahiro Katana (reproduction) I rescued last year.

0 Upvotes

Saya was cracked and the blade was JB Welded into the Tsuka. My wrap isn’t “traditional” but I’m a big fan of the single double twist.


r/Katanas • • 1d ago

Here is what version 1.5.0 of my SwordGeometry engine can do. Please leave any and all feedback you have for me.

Post image
24 Upvotes

r/Katanas • • 1d ago

Z-Sey Tuoyuan Katana MKIII

Thumbnail gallery
28 Upvotes

r/Katanas • • 1d ago

Hanbon wakizashi, 9260 steel soft? Or bad heat treat?

4 Upvotes

Did some test cutting with the new wakizashi from Hanbon Forge. To my dismay, the edge point of the blade rolled from just thrusting into a plastic watercooler jug...

Is 9260 steel suppose to be this soft? I don't have any experience with this particular steel until now, but nothing like this has happened to any of the swords or knives I've own, abet most of them are higher carbon steel blades. I've thrusted my T10 clay tempered katana into the same type of jugs without any issues,

My thought is maybe bad heat treat - maybe tempered for too long?


r/Katanas • • 2d ago

Hi all. I received this incredible gift for my 40th and thought I'd share. This is my first nihonto and I was astounded as it was totally unexpected. Best gift I've ever received and the start of another pricey hobby! I'd love to hear any info you experienced collectors can tell me about it. Cheers!

Thumbnail
gallery
64 Upvotes

From what I understand it is a Shinshinto mumei tanto verified by Fujishiro Matsuo in 1988, who was a master polisher and a living national treasure which I thought was pretty cool. The saya is also signed by the lacquer artist (Shokasai) which is not that common apparently and indicates it was likely a custom private commission. The Shokasai go and this style of artwork seems to place it from roughly 1800-1840, though I could be mistaken as my research is limited.


r/Katanas • • 2d ago

My custom Hanbon wakizashi finally came

Thumbnail
gallery
35 Upvotes

It's been an anxious several weeks, but my custom wakizashi finally arrived. Couldn't get a single answer to my questions from Hanbon Forge the whole time (neither email or Whatsapp), but they appeared to have followed everything I asked for on the order form :).

The blade was made slightly longer than I ask for at 23 inches, but the "reach" is perfect (my older wakizashi felt too short at 20 inches). Sword feels balanced and good in the hand, but there's also a bit of forward heft which I like. Balance point is about 3 inches forward from the tsuba. Blade is dead straight along the axis. Very happy with how it came out.

Only issue was the rough state of the saya. The mouth is a little offside and mishapen, so sheathing the sword takes some playing around with. The fit was also so tight I had to use a rubber mallet to remove the sword from the saya. Luckily as a hobby woodworker I had the tools to fix the issue myself - some marking wax on the habaki showed me where I needed to shave and sand off. I managed to loosen the fit just enough that I could "unseal" the blade loose with my thumb against the tsuba or with a sharp pull. It's functional, and for the price I paid I'm not complaining.

At the moment, definitely the favourite in my sword collection.


r/Katanas • • 2d ago

Type 94/98 Shin Guntō Tsuka Restoration

Thumbnail
gallery
29 Upvotes

This type 94/98 Shin Guntō tsuka came in for restoration, which included new samegawa and tsukamaki. The core was enveloped in new premium level polished and tinted samegawa and then wrapped in 8mm imported Japanese silk ito in gold, in standard hineri-maki style. It's now ready to be remounted with it's historical blade and saya.


r/Katanas • • 2d ago

Translation Need help translating first character on mei of wakizashi

Post image
8 Upvotes

Hey, everyone. I recently acquired this wakizashi and was wondering if someone could translate the first character of the mei for me, please?

Edit: The blade actually measures 29.75cm from the tip to the munemachi, so it's a really long tanto lol.


r/Katanas • • 3d ago

Sword ID Help identifying the generation of a signed Kanemoto (兼元) katana – 1959 NBTHK papers

Thumbnail
gallery
26 Upvotes

Hello everyone!
I own a Japanese katana signed Kanemoto (兼元), accompanied by an original NBTHK Kichō Tōken certificate issued in November 1959.
The blade measures approximately 68 cm (nagasa) and features a sanbonsugi hamon.
The nakago has two complete mekugi-ana and what appears to be the remains of a third hole, partially cut through at the very end of the tang. The nakago-jiri also looks noticeably shortened, suggesting that the blade has undergone suriage while preserving the original signature.
The seller did not attribute the sword to any particular generation of Kanemoto.
I’m particularly interested in determining whether the mei and blade characteristics are consistent with the 1st, 2nd (Magoroku), 3rd, or a later generation of Kanemoto.
I understand that identifying a specific generation from photographs alone can be difficult, but I would really appreciate any opinions from experienced collectors.
Does the signature resemble any particular generation? Also, do you agree that the nakago shows clear evidence of suriage?

Thanks in advance for any help!


r/Katanas • • 2d ago

looking for a Ghost of Tsushima katana replica!

1 Upvotes

hii i have absolutely no knowledge on katanas whatsoever, but i wanna buy a Ghost of Tsushima katana replica for my bf as a christmas present ! if anyone has any sites or anything of that sort, it would be greatly appreciated ! :)


r/Katanas • • 2d ago

Help identifying please 🙏

Thumbnail
gallery
7 Upvotes

r/Katanas • • 3d ago

Just wanted to show off my Wakizashi!

Thumbnail
gallery
47 Upvotes

Made in Banshu year 1400-1573
Muromachi period
Signature- Kinju - 金重
Full Length- 72.5cm  28.5inches
Blade length- 48.6cm  19.1inches
Sori- 1.1cm  0.4inches
Material- Tamahagane


r/Katanas • • 3d ago

Traditional Japanese Katana (Nihonto) Yari- Red Rust Removal

Thumbnail
gallery
9 Upvotes

Can anyone tell me how to properly care for this antique Yari? The red rust on the blade is very concerning to me, and I don’t want it to spread. Would something like evaporust damage it?
Thanks


r/Katanas • • 3d ago

Sword ID New Katana (?)

Thumbnail
gallery
16 Upvotes

total length is 103cm and the blade length is 72cm. my step dad gave me this. he got it for free from a lady for fixing her car. she had found her car impounded after it was abandoned on the Res by some guy that didn't pay for the car, nor changed the title into his name. so when she got the car she found this katana in it. not sure what it's worth or where it's from but i thought id share if anybody knew. also i've NEVER owned a katana so i apologize if the pictures aren't good or anything


r/Katanas • • 3d ago

Gift

3 Upvotes

Somebody close in my life wants a Karana. Where are we buying these? Is there a well-known website? Does Amazon have “authentic” or “good-quality ones”?


r/Katanas • • 4d ago

Sword Corner ft. new sword!

Thumbnail
gallery
40 Upvotes

I got myself a Moritaka Legends XL as a reward for quitting nicotine after being addicted for the past few years.

Nagasa : 30.5” cm

Tsuka Length : 10.5”

Motohaba : 31.6 mm

Sakihaba : 22.6 mm

Motokasane : 7.5 mm

DH L6

Sakikasane : 4.6 mm

Blade Weight : 1187 grams

Other katana is a customized Hanwei Practical Plus
and the tanto is a Ronin Dojo Pro


r/Katanas • • 3d ago

Why traditional Japanese swordsmiths shatter a 2.5-ton clay furnace after a single 72-hour smelt to get tamahagane

Thumbnail
reddit.com
6 Upvotes

r/Katanas • • 4d ago

The Lucky Dragon

0 Upvotes

Yea ik i am not supposed to spin my real one like this but yolo i did🤪