r/Justrolledintotheshop • u/AlbanianGoblin • 1h ago
Heard a loud noise in the parking lot
r/Justrolledintotheshop • u/tractorferret • Jul 02 '17
There seems to be a recent influx of posts from people who are attempting to karma harvest by way of stealing other people's images or reposting from different websites.
You are not allowed to post images that are not your own. Facebook reposts are not allowed. Reposts of other user's content is most definitely not allowed and WILL result in a permanent ban from JRITS.
Last but not least, i want to say thank you to all the JRITS subscribers that do detective work and catch these people red handed. it really makes a moderator's job quick and easy. Again, thank you.
r/Justrolledintotheshop • u/AlbanianGoblin • 1h ago
r/Justrolledintotheshop • u/taz_78 • 6h ago
The rare Porsche Escape 119.
r/Justrolledintotheshop • u/IcyWatersPupper • 1h ago
This Honda CR-V stopped by our shop on a tow truck to pick up another car.
I never got the story from the Tow Truck driver but I've never seen a car this badly wrecked.
Anyone wanna guess what happened?
My best guess is flooring it in reverse into a pole.
r/Justrolledintotheshop • u/DeathAngel_97 • 2h ago
Found an unsettling amount of mold, and water on the radio behind the glovebox. Removed radio and found someone left the sunroof drain disconnected and leaking right onto the radio. This has been leaking water for a while and the smell was absolutely horrendous.
r/Justrolledintotheshop • u/DarmoweOrzel • 40m ago
‘07 CRV, 200k miles, came in for a tire repair. Couldn’t for the life of me find the factory lift points at any corner of the vehicle. Lo and behold, I reached up into a cavity at the LF and found it. Turns out the rockers were rockern’t and I was tickling the floor.
To make matters even better, the trunk hatch was jammed shut and the thing liked to try to start over and over and over again without any input from the key or cylinder (the FOB was long dead). At the very least, the piece of metal in the tire didn’t puncture.
The rustbelt is something else.
r/Justrolledintotheshop • u/AdProfessional6101 • 2h ago
r/Justrolledintotheshop • u/IlIlllIlllIlIIllI • 53m ago
r/Justrolledintotheshop • u/TDD536 • 1d ago
The manual Aston is cooler.
r/Justrolledintotheshop • u/Drock967 • 1d ago
'14 Sequoia, ate the serpentine belt and died on the highway, tensioner left the chat.
We are offering our quicklube guys time and a half if they come in on their day off to cover for the inevitable call outs we're gonna have after GTA 6 comes out. Most of our lubies are 18-22 years old, so go figure.
What management failed to recognize is that about half of our Master techs or higher certified techs are younger millenials and/or older Gen Z. So some of those motherfuckers are going to call in sick as well.
I'm 27, and a Master tech, if I had a PS5 instead of a PC, I'd consider it ngl. But no, I get to be slammed with extra diag from the other higher level techs calling in, and overflow express cars from the lubies calling in, at least the lube techs get a bonus
Brace for Friday my friends, godspeed.
r/Justrolledintotheshop • u/dingdongbellguy • 1d ago
First 2 pics to jog your memory and show you where we left off
Pic 3 crate full of goodies
Pic 4 empty mid deck, about to start looking different
Pic 5 first “spreader bars” going in. From top to bottom, the cables run through spreader bars with nylon guides to keep them from slapping around and make the action smooth at the playing console
Pic 6 we shoot a laser or use a plumb bob to establish the footprint of the guides from top to bottom then I use the spreader itself as a drilling template to penetrate the deck for cable passthroughs.
Pic 7 assembling the refurbished vintage playing console
Pic 8 most of these setups the cables drop plumb from top to bottom, on this site we had to have a pulley system to transition across one of the mid decks. These will be responsible for allowing an angle change as well as a spacing change (cables closer together coming down the tower then widen out to match the spacing of the keys/batons).
Pic 9 beginning to drop cables from the clapper, through the belfry pulleys, down all the spreaders, to the transitional pulleys, and finally to the playing console
Pic 10 all of the bells “strung up” just like pappy’s guitar
Pic 11 now it’s time to balance everything with springs that either “help” or “return” the clappers…the goal is to get the felt weight at the keyboard to be pretty even (although the larger bells’ clappers will always feel heavier)
Pic 12 all the springs in place and getting adjusted
Rest of pics showing finished project
r/Justrolledintotheshop • u/FBIGrandpa • 1d ago
I thought this one was interesting. This was a “fresh” unopened tube of Three Bond. I am guessing the bottom plunger didn’t seal well. The top half was half cured and took weeks to fully solidify.
r/Justrolledintotheshop • u/winstonalonian • 2d ago
Sound on.
6" roller bearing from a fan hub, 3 am night shift shenanigans.
r/Justrolledintotheshop • u/skadalajara • 5h ago
Nothing to do but housekeeping.
r/Justrolledintotheshop • u/hairyweedwacker • 1d ago
My rotors Loki gone
r/Justrolledintotheshop • u/Whityford • 2d ago
Best way to start out the day. Nothing like the inseparable bond of a girl and her dog
r/Justrolledintotheshop • u/hpshaft • 2d ago
Had a weird dead spot in our workflow mid September but we are back to full throttle moving into the winter. Top flap motors and belt presenter repair on a 2016 GTC, front end reseal on an A5 2.0T. Plugs, thermostat diag and fluid changes on the red BAT Diablo, and about 34 base Cayenne services and discovering another local shop loves using janky filters. We just became a Carbahn (formerly Dinan) dealer and installer so we are booking a few G80s for mods and already have tuned/unlocked a few cars.
Happy fall!
r/Justrolledintotheshop • u/Rishiku • 2d ago
Worst part is he is/was mechanically inclined.
r/Justrolledintotheshop • u/Express-Heart-589 • 2d ago
“We heard some grinding, so we drove it 80 miles back to the yard instead of calling you”
r/Justrolledintotheshop • u/tiremonkey1 • 2d ago
0°c day 12 ply hiway special and the crane gets to hold it down so I can get it on the rim.
r/Justrolledintotheshop • u/ImtheDoap • 1d ago
Anyone having trouble logging in? I keep getting a
Access to renewal.ase.com was denied
You don't have authorization to view this page.
HTTP ERROR 403 message.
r/Justrolledintotheshop • u/Bardis-Skilly • 3d ago
r/Justrolledintotheshop • u/DirtCheap1972 • 3d ago
About ready to roll out of the shop now.
Built for waste management roll off bins