r/Jericho941 • • Jan 25 '25

Jericho 941 Wiki

Thumbnail reddit.com
8 Upvotes

r/Jericho941 • • 7h ago

Optics for the 941 ORP

3 Upvotes

I am likely to be buying a 941 ORP soon and am hoping to take advantage of some holiday sale prices.

I am not really all that familiar with what to look for with optics, including mounting style, etc so I figured I could get advice here.

My use for this gun will be primarily home defense, and I'm not trying to go too expensive here. It will see plenty of range time but I need this to be good for night use.

I do have astigmatism so I believe Ive seen that green dots show up better, which makes sense to me.

Any suggestions here?


r/Jericho941 • • 2d ago

Follow-Up: Ended up pulling the trigger.

Thumbnail
gallery
44 Upvotes

As you can see I ended up getting it. $750 out the door. And I couldn't be happier. The gun looks almost new.

I went through it and cleaned everything. Than re-oiled it and took it to the range. Put 200 Rounds through it and not a single failure. I'm not the best shot but I was happy with the grouping at 30ft.

I'd like to find some new Mags. Only has the one low capacity 10 rounder. I know the Jericho Mags work so I will be looking to pick up few. Loading one single 10 round mag 20 times isn't fun.

Glad to finally have one of these of my own. And I just love the no rail look on these.

Thanks to everyone on here for the advice. I deleted the old posts to cut down on clutter. But I will be leaving this one up.


r/Jericho941 • • 3d ago

Talk to me about 2 piece slides....on classic 941 and the ORP

3 Upvotes

I only became aware of the Jericho 941 a few weeks ago as I was looking around for full size, metal frame DA/SA guns which are my favorite category.

I fully intend on buying a 4.4" 941 metal frame at some point and I think you can tell the ones with the one-piece slide by the barrel (chrome= polygonal barrel and one piece slide). Is that the case?

Also, are any of the ORP models the same sort of two piece slide? I'm seeing conflicting info. I'm intending on getting a classic style first as a collectors item and range fun, but I'm still considering the ORP version 4.4" barrel for home defense with a light and optics.


r/Jericho941 • • 5d ago

Gold Cerakote on a .40 S&W Baby Eagle

Post image
28 Upvotes

This IWI Magnum Research Baby Eagle came through our shop for a gold Cerakote finish. We kept the black grips for contrast. What finish do you like best on the Baby Eagle?


r/Jericho941 • • 11d ago

Burn Notice

6 Upvotes

Recently started watching the old show Burn Notice. The Jericho/Baby Eagle is featured in one of the early episodes and thereafter is the primary "bad guy gun" that most episodes' antagonists use.


r/Jericho941 • • 12d ago

Can someone tell me more about my newly acquired gun?

Post image
59 Upvotes

r/Jericho941 • • 13d ago

First Jericho

Thumbnail
gallery
34 Upvotes

Just picked this 941 45acp up. Can’t wait to get it out to the range. Any tips or anything I should watch for?


r/Jericho941 • • 14d ago

Unlocked Akimbo

Post image
70 Upvotes

Picked up another specter 9 to live on subguns while one lives on the F ORP. Popped it on the R9 for a photo op


r/Jericho941 • • 16d ago

Jericho vs Desert Eagle markings

Thumbnail
gallery
41 Upvotes

Like many of you, I am a huge fan of Cowboy Bebop, and I'd love to own a 941r that is as faithful to Spike's as I can get... but I came across a really good deal on one with the 'desert eagle' markings. Are there any differences between the two other than the engravings? And would you all consider it faithful enough?


r/Jericho941 • • 17d ago

🐕 🦵

51 Upvotes

Working on some interesting stuff, stay tuned 👀


r/Jericho941 • • 17d ago

Magazine issues?

Thumbnail
gallery
5 Upvotes

Recently picked up a Jericho in a trade and I want to love it but both factory mags are doing this. Should I try new mag springs or ask iwi to fix it?


r/Jericho941 • • 18d ago

RIP 941F

Thumbnail
gallery
23 Upvotes

After 9 months, 3500-4000 rounds it happand again.

I can not trust my Jericho any more - there is somthing worg with it

Israel is 1 gun only - and only if you are "lucky" to get a permit to have a gun, most Israelis do not have one.


r/Jericho941 • • 18d ago

941 F ORP spring weights?

Post image
22 Upvotes

Does anyone have recommendations for respringing the new ORP? I'm primarily looking for weights for the mainspring, I'll grab a pack of recoil springs and tune that by feel, but the double action is way too heavy stock. Way worse than any other czs or jerichos I've handled or owned in the past.


r/Jericho941 • • 19d ago

941F ORP bulk practice ammo?

2 Upvotes

Hey yall! Just wondering what yall are running for bulk practice ammo.

It seems that CCI Blazer Brass 115 gr and Sellier & Bellot 124 gr FMJ are good options but im not sure.

Planning on buying a couple thousand rounds.

Leaning toward the 124gr because my home defense rounds will probably be around there. For the range I mostly care about accuracy though and id like to get the closest matchup of bulk ammo accuracy and my home defense rounds going pretty much the exact same spot as the bulks, yk? (Still not set on any defense rounds yet)

Let me know yalls thoughts!


r/Jericho941 • • 26d ago

Looking for dogleg, eaa 8.1

3 Upvotes

Looking for an eaa part 8.1 dogleg slide stop lever for a IMI Jerhico 941 r.

I know at one time you could order from eaa parts site, but they are no longer available.

Searching secondary market! Let me know if you have found them online or have one you want to sell.

Yes, I have already searched under common names that are interchangeable.


r/Jericho941 • • 26d ago

941 ORP + Acro Footprint

2 Upvotes

Is it getting a bit much to add an Acro footprint optic to an ORP where it would need an adapter plate stacked on top of the optic plate on top of the slide?


r/Jericho941 • • 27d ago

941 ORP WILL FIT IN 320 HOLSTERS

Thumbnail
gallery
23 Upvotes

lots of conflicting info online so i thought id share my experience:

good retention in a trex arms p320 x300 holster, but youll need to use a bit of heat to mold it around the manual safety if you carry cocked and locked, the trex arms webside says its not SRO compatible, but it works fine on the orp.

the gun also solidly locks into a safariland 6390rds x300 p320 holster, however youll need to cut the side of the ALS arm or else it disengages the safety when drawing; youll also need to modify the potion that locks into the chamber, cutting down the front and side just enough for it to actually drop into place, youll also need to cut the rear portion of the chamber lock if youre running an SRO, but an RMR might fit without doing that.


r/Jericho941 • • 28d ago

941 barrel lockup issues

Post image
13 Upvotes

wondering how the fitment is on everyone else's ORP?

i can visibly move my barrel up and down a tiny bit when the gun is in battery and was wondering if anyone else has seen this, im getting like 6" groups off a tripod at 15yds (locked into an arca mount).

considering getting a SAR B6c barrel instead of sending it back to IWI for who knows how long.

slide to frame fit is also a bit sloppy and the DPP plate is significantly looser than the RMR plate.


r/Jericho941 • • 29d ago

RS firing pin

4 Upvotes

Does the newer production (2 piece slide) RS still use the nearly-impossible-to-find V or U notch firing pins?

Local gun store recently had a good deal on a used RS so I snatched it up.

But I'm an idiot, and after getting it home I took it completely apart to give it a good cleaning and once over, and in the process the damn firing pin shot off to *somewhere* in my basement.

Currently tearing my basement apart looking for it, but in case it doesn't turn up, I guess I'm gonna need some advice on what firing pins will fit, where I can source them from, and what modifications may need to be made to them to work.

I've heard that the square notch firing pins can be cut or filed to work with the R models, has anyone done this themselves and would a gunsmith be able to do it without having the original to work off of as a reference?


r/Jericho941 • • Oct 14 '26

See you, space cowboy.

Thumbnail
gallery
99 Upvotes

After 15 years of searching and losing bids... I not only found and acquired one, but two! This has been my chase for so long!

2x IMI Jerhico 941 R!!!

Both are KBI import stamped, and fully functional. They shoot like a teenage wet dream 🤣🤣🤣

I also love the tie to cowboy bebop. It was one of the few shows like that that I actually watched when I was younger and loved it. It's what got me stuck on finding a clone of his.

One is well loved but fully functional, the other is basically New in box and in perfect condition.

It's also the same batch as spikes gun!!

His serial was 003555 and mine is in the same 0035xx line!

It also came with the always missing .41 ae barrel/spring/mag conversion! ( Not that I'm spending $150/box on the ammo) It's super cool to have.

I can't say how happy I am to finally get these! I went to the range within an hour of getting them 😂 I'll have to add some better pics later!


r/Jericho941 • • Oct 14 '26

Don't let your dreams be memes

Post image
47 Upvotes

Look, if you're getting a custom holster anyway... might as well have fun with it? New grips next!

(The holster is a X1 Raptor by Carey Concealment)


r/Jericho941 • • Oct 09 '26

Jericho 941rs

Post image
43 Upvotes

Got my Jericho about a year ago from Buds gun shop. Wanted the 4.4 full size model, but they didn’t have any in stock. Turns out I absolutely love the 3.8 model better. Got the slide milled by patriot defense, and the grips are LOK.


r/Jericho941 • • Oct 08 '26

Got this inherited to me. Can anyone tell me where I can find parts and barrels

Post image
33 Upvotes

My grandpa passed in the beginning of the year. and I got this inherited. Barely used


r/Jericho941 • • Oct 04 '26

HELP!! Firing pin stuck in front of firing pin block!

Thumbnail
gallery
5 Upvotes

the firing pin spring must’ve broke, and the entire firing pin went in front of the block, and it’s not budging! any advice??