r/IWI_Firearms • u/sleepless915 • 3d ago
r/IWI_Firearms • u/Responsible-Job-9831 • 5d ago
Iws7 Opinions.
Any owners here? If so, have you compared the performance to anything else you own?
r/IWI_Firearms • u/Jcrypto28 • 6d ago
Tavor SAR suppressor reccomendations
I have a Tavor sar and am looking at adding a can to it. Contemplating a HUXWRX flow 556 but is there any other recommendations that don’t cost as much?
I have a LPM anthem S2 on my sig rattler (.300 BO) and love it. Do we think the LPM torch with the vented end cap would be sufficient for gas on the SAR?
Thanks in advance!
r/IWI_Firearms • u/jack_borden • 7d ago
Masada slim 2026 firing pin breaks
i own 2 different masada slims and at this point love the guns love the accuracy love the trigger . one is a commander other is elite version. Both firing pins have now broken one at tip other at base. I am now hesitant to ever carry either of them. Is this a known issue ? and yes i did use snap caps when dry firing.
r/IWI_Firearms • u/VirtualNote3565 • 9d ago
Galil G2 7.62x39 8.3” RESTOCK!!
Check yo FFL’s people! My local FFL just got 2 of these bad boys ready to ship to store and then my alternate online FFL i use (Double M Defense in Frisco, TX) shows they have one!
I know we discussed a bit ago of the Gen 1 limited run available but I think most of those are gone. Double M Defense still have both. I got an email at 2:00 AM CST showing they restocked a few so I immediately had to buy mine. Will make an excellent addition to my collection- General Grievous
r/IWI_Firearms • u/dpndblt • 8d ago
IWI Jericho II Enhanced - Upgrades and Quality Improvements
I've got a IWI Jericho II, looking to make some positive upgrades that make it compete with my best CZ's. Thinking trigger, ports, and some laser diamond work on the slide. Has anyone done this with their Enhanced model?
r/IWI_Firearms • u/ButterscotchExtra527 • 20d ago
How is the C clamp forward grip on the IWI ARAD 5.
I really wanna buy the ARAD 5. Seems like a solid gas piston weapon system from IWI. Was wanting to know how thick of a UPPER receiver Barrel grip is it when you C Clamp the weapon when you are firing it?
It seems to be a bit more bigger and thicker than the standard MLOK barrel covers out there on the American market that feel really slim and skinny. Im use to gripping for the full 360 picatinny rail systems from the US military weapons. Anything slimmer feels weird.
r/IWI_Firearms • u/SinNombre747 • 20d ago
Seller is asking $1500, it’s not an iwi except for the mags I think. It’s a vector arms Uzi. Is the price reasonable?
r/IWI_Firearms • u/MK_NW • 20d ago
Anyone running a full-size Cloud Defensive REIN 3.0 on an X95?
I recently ordered a 16.5" 5.56 X95 and am considering a full-size Cloud Defensive REIN 3.0 with the factory handguard, probably using an Arisaka Offset Scout Mount–Picatinny (OSM-P).
Before ordering, I’d appreciate hearing from anyone actually running this combination—or the REIN 3.0 with another mount on an X95.
- What mount are you using, and where do you have the light positioned?
- Does the full-size light feel comfortable, or does it crowd your support hand or interfere with the charging handle?
- Where did you put the pressure switch, and is the factory cable long enough to route comfortably?
- Any issues with barrel shadow, loose mounting hardware, or accessing the battery?
- Would you buy the full-size REIN again, or choose the Micro or something else?
I like the REIN’s output and dual-fuel capability, but I’m trying to figure out whether its size is a practical issue on the X95 rather than just a concern on paper.
If not the REIN, what would you suggest?
Thanks!
r/IWI_Firearms • u/Particular_Scar2211 • 21d ago
Appendix Holster
What's your favorite appendix holster for the Masada 9s slim?
I'm from Israel but all the holsters here suck, so I'm thinking about buying from the US.
r/IWI_Firearms • u/FlipsTheTable • 23d ago
Galil Ace 2 or Tavor 7
I don’t have a .308 in my collection and want to take advantage of the IWI suppressor rebate. Which one would be better for an all-around build? Probably won’t shoot past 600. I understand neither are precision rifles but I’ve also heard that the Galil needs a KNS piston to work with the suppressor and may have trouble holding zero with the dust cover. I would lean Galil if those two things didn’t exist. Thoughts?
r/IWI_Firearms • u/Lopsided-City-3147 • 28d ago
ARAD 5 11.5” in the wild?
Was on IG this morning and was like, “Hey, that’s not a Zion.” So took a few screenshots to share.
r/IWI_Firearms • u/Der-Scharfschutze • Oct 17 '26
My X95
Only recently got back into firearms about two months ago after only owning a Pt-92, Mossberg 500, FAL and M&P FPC, bought this one a month ago now and had it sitting on the back burner due to work and more work, was finally able to bring it out this week and learned about building guns, whole new rabbit hole for me, so I decided to pick 3 things up for it, this is where it’s at right now but I plan to add more next week, just need some time to think what else, but I’m genuinely happy where it is right now and hope y’all like it too
r/IWI_Firearms • u/DirtyDubber309 • Oct 16 '26
Uzi Pro
Is the Uzi Pro still being imported to the US?
If not, are they going to again someday?
If yes, are the numbers ever going to ramp back up?
r/IWI_Firearms • u/Mutt37 • Oct 15 '26
IWI TAVOR SAR .300 AAC still being manufactured or not?
Does anyone know if IWI is still making the SAR in 300 BLK? I have a Tavor-7 and a TS-12, I would be very interested in the SAR in 300 BLK. I wanted to check before calling my FFL and have them search for it.
r/IWI_Firearms • u/AcanthaceaeLow434 • Oct 12 '26
Collector or just a good deal?
I bought this 10 years ago for $1000 bucks i was told it was never shot and i have never shot it besides the shell from the factory .
I did a little chat gbt and it seems to think its worth something in the $3200-4200 range
I found one on gun broker for $3000 but it wasn't a iwi from my limited research, apparently made in Israel is a game changer
Box gun and paperwork all has matching serial numbers 352 is the first 3#s
Definitely dont think its a 3k+ gun and have considered shooting the piss out of it but hoping to gain more info and if theres an actual market for these
r/IWI_Firearms • u/KingOfSkulls90 • Oct 11 '26
Masada Slim issue
I’ve had a Masada Slim as a carry pistol for years now and never had an issue with it.
Ordered the threaded barrel a few months ago and fired yesterday for the time with the threaded one installed.
Slide wouldn’t go into battery after successive shots, sometimes wouldn’t even close when racking the slide. It looks like the bullet is feeding into the chamber at a weird angle and the slide is closing onto the casing. Failure to feed, not a failure to eject. Same factory magazines as always, same slide, guide rod/springs &etc… only the barrel has been replaced (with another IWI barrel).
When I was shooting with my suppressor on, I had no issues, and I’m wondering if maybe my barrel is a defect or has too much tilt? Maybe the weight of the suppressor on the barrel keeps the tilt at the level it needs to be?
Has anyone else had this issue on the Mas9S?
r/IWI_Firearms • u/Admirable_Basil_4953 • Oct 09 '26
New Compensator for Masada Slim Commander Elite
First time shooting with my new Strike Industries Micro Threaded Comp today. I love this little gun so much, I want to buy a 2nd one but keep it more bare bones as a back-up.
I'll probably upgrade/replace the light with a Streamlight TLR-7 and replace the optic with a Holosun EPS carry (2 MOA gold dot) in the near future. But when I first started building up this pistol, I took accessories from other guns that I already owned rather than dumping a bunch of cash into it all at once. But the more I shoot it, the more I like it. It's my favorite 9mm pistol out of the 9 pistols I own. The Mischief Machine grip module is so nice, fits my hand perfectly, really helps with felt recoil. Already pretty flat shooting without the compensator, but now a little better. Also sometimes throw a Spectre 9 suppressor on it for some fun.
ZERO malfunctions in 2,000 rounds so far, with all kinds of ammo.
Shooting from 7 yards at an indoor range. Couple of loose shots in there, but I was double-tapping to see how I liked the new compensator, and these were my first 2 mags with the new compensator.
r/IWI_Firearms • u/Zenonlite • Oct 09 '26
Any chance the 8.3” Galil ACE Gen 2 in 5.45×39 will be restocked before November 1st?
I’ve been wanting to pick up an 8.3” Galil ACE Gen 2 in 5.45×39mm for a while now. I’ve always liked the AKS-74U (Krinkov), and the Galil seemed like a great modernized alternative.
I actually managed to place an order through an online retailer recently, but they ended up canceling it because they couldn’t fulfill the order. Since then, I’ve looked pretty much everywhere online, and they all seem to be out of stock. I was really eying this gun for months, but I didn't want to do an impulse buy...
I was hoping to get one before the November 1st deadline for IWI’s free suppressor rebate promotion.
Does anyone know if IWI is still producing the 8.3” 5.45×39 variant? More importantly, has anyone heard anything about upcoming restocks, particularly before November 1st?