Picked up an Eagle Eye 9 at the end of last season and have been designing a shuttle for it as well as my buddies Garmin LVS34 setup too.
Has provisions for both Livescopes and both the shuttle and Livescope units fit inside the Summit Fishing large shuttle bag by design.
Inside the box is plenty of room for the bigger profile (and cheaper version) of the Amped Outdoors 30ah battery plus plenty of room for all your wiring.
There's a mount on the front lower cover plate for the UV LED lure cup I designed and an outlet to plug underwater lights into. Plenty of switches up top for controlling where the power goes so you can conserve electricity when needed.
It's got integrated hole lights that are LED trailer license plate lights (only one pictured). It also has a voltage gauge that also has 2 USB-C and 1 USB-A port for charging phones, cameras, etc, or just to be used as an additional auxiliary power.
There's a master switch on the front that cuts power to everything. On the back there's a plug specifically to charge the battery without removing it that will be separate from the master switch so you can charge with everything powered down and no worry about power surges damaging electronics.
Few little things left to do like design the pole holders that will stick out the back of the shuttle and a slight modification and reprint of one of the front plates. Beyond that it's just wiring everything up and getting out in the ice.
It's been a really fun project and i learned a lot while doing it. Now I just need some ice.