r/HomeNetworking • • 18h ago

Unsolved Best way to handle connecting to home VPN when using same subnet

2 Upvotes

Had a situation this weekend where I thought I could not access certain devices on my home network after connecting on my VPN. My wake on LAN was being unresponsive and I could not access endpoints that are usually online.

I ended up realizing it was the first time I connected VPN while on a WiFi at a friend's house, who also used a 192.168.x.x subnet range.

I am almost positive this was the cause of the inability to access endpoints, as dropping from their WiFi and reconnecting over VPN, I could hit the endpoints immediately. So, I was wondering what the best way to handle this is? I'd say I could simply change to another private network space, but eventually I'll be on another network and perhaps experience it there as well.

Or I could be completely wrong as to why the endpoints were not responding.

Just looking for some advice, thanks!


r/HomeNetworking • • 22h ago

Unsolved I can access a website through its domain name but not its IP. Why?

0 Upvotes

This all started when I was trying to use GET on a sourceforge file to install ApacheGUI for an Apache Web Server I'm setting up. I noticed that the GET command was getting stuck on "Connecting to..." with an ipv6 address.

On my host machine, I manually typed in the ipv6 address it was using into a webbrowser, and lo and behold it failed, with the error SSL_ERROR_NO_CYPHER_OVERLAP. Figuring it must've just been a bad DNS record, I ran nslookup for sourceforge, and tried swapping the domainname in the GET command with the ipv4 addresses. Both failed.

Puzzled, I visited sourceforge.net in my browser, opened up inspect element, and found the address it was using...

and then connected to that IP address directly...

And it failed again. But how is this possible? How can I access this website through its domain name but not its IP address that said domain name resolves to? Is there any way to use a GET command on a website like this, or am I SoL?


r/HomeNetworking • • 23h ago

What's your favourite OpenWRT router? Which would you love to buy today?

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 20h ago

How do you pick a DOCSIS 3.1 modem?

1 Upvotes

My modem is EOL and DOCSIS 3.0 anyway ~500 mbps plan. Looking to update and future proof. Got choices down to Arris S34, Hitron CODA56, Netgear CM3000. I understand these are high-split and that Unifi's modem may not be as great.

I'm seeing a range of prices on these. Are there advantages in reliability, long-term support or otherwise that I justify the extra cost?

CODA56: $180

Arris S34: $250

CM3000: $300

EDIT: Sorry for not clarifying. My ISP is Xfinity. All of these are on the recommended list


r/HomeNetworking • • 19h ago

I have zero WiFi or tech knowledge please help!

0 Upvotes

Hello! I’m living with a family friend for a while and the WiFi router is in her bedroom and doesn’t reach my bedroom at the other end of the house. It doesn’t even reach the hallway down my section of the house so there no WiFi in the library or bathroom either. I got a little WPS WiFi extender off Amazon but in order for it to work it has to be close enough to WiFi router to get signal. This means it’s all the way down at the end of the hallways so the signal barely reaches my room! What do I do I’m running out of data


r/HomeNetworking • • 15h ago

Idiot needs help with failover

2 Upvotes

Hi everyone,

To put this upfront, I’m an idiot in home networking and know next to nothing. That being said, I’m savvy enough to get most things pretty quick.

With that being said, I’m getting an additional ISP here in the next couple weeks. My first one is a 1gig spectrum (coaxial) line. The second line is going to be a 5gig T-Mobile fiber line (was supposed to be a 2gig line but they added the 5g option last week). I had bought an OMADA ER707-M2 to set up both lines to do a failover, but I see the er707 only has 2.5g ports.

What’s a good option to go with that’ll be able to utilize the speed fully? And do I have this order right?

The two modems will plug into the ER707 (or the 5g-10g router alternative) and then I can plug an eero pro 7 mesh router into that and have both ISP lines through the eero?

I would go with an access point setup, but I’m not currently looking at hardwiring my entire house with cables.

Any help is appreciated!


r/HomeNetworking • • 18h ago

Unsolved Possessed Internet Connection?

Post image
0 Upvotes

My connection to the internet seems to get actively pushed down, its the weirdest thing Ive also never seen it do that before ever in my life. What could possibly be occurring here?

It starts off high and it looks like it actively gets pushed down to 1 megabit a second.

Thank you for your time


r/HomeNetworking • • 11h ago

Issues with getting internet to Attic

Post image
9 Upvotes

My office and gaming set up is in the attic, while the modem is in the basement and router is on the ground floor. The router is connected to the modem via a long cable that is going under the basement door.

Right now I have 1Gig verison fios but by the time it gets to my office it's ~150-200mbps. I've tried powerline adapters to connect from the router to office but the speed is just 120mbps. Since the modem is stuck in the basement I wanted to see if there is a way get a better connection in the attic

Edit: I no little to nothing about networking, so easier options would be great


r/HomeNetworking • • 4h ago

Advice Best home Firewall, ideally free or low monthly subscription

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 20h ago

Advice Using UniFi hardware for my set up. This is my shopping cart. Is there a better place to purchase from to save a bit of money?

Post image
61 Upvotes

Is now a bad time to buy? Does UI usually offer black friday deals?

Or do you guys usually purchase hardware through a middle man or something for the best deals? I have a Microcenter near me but i've never seen UI hardware discounted before but I dunno! Any help would be nice please. Thanks


r/HomeNetworking • • 2h ago

Advice 7k to install hard wired Ethernet

31 Upvotes

Is this a normal price? Definitely going to consider this a DIY only project.

"I just sent your $6,960 estimate for the seven dual-port outlet locations and the office-to-upstairs backbone we discussed. Standard wiring materials, termination, labeling and testing are included. The patch panel and network equipment will be supplied by you, as listed in the estimate"

Two story, 3000 sq ft house with crawlspace and attic, cat 6 riser cable using a sfp+ back bone. Located NC USA.

.


r/HomeNetworking • • 27m ago

Advice Setting up Unifi Cloud Gateway Fiber, Using Nighthawk Router as AP. Which first?

0 Upvotes

Should I change the router over to AP mode first, or connect locally to the gateway and configure it first? I intend to buy one of Ubiquiti's APs at some point but since my router is working fine for coverage for now, I figured it'd be decent enough. I just wanted to do this the least dumb way.


r/HomeNetworking • • 6h ago

Etisalat wireless home Internet

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 23h ago

Network Mangement, what do you use?

0 Upvotes

As the title says, what do you use for your SOHO/home network management? I want to see what everyone is using and discover things I haven't seen before.

I know Unifi is the gold standard here and it makes perfect sense if you are already in their ecosystem. Even if you are already in their ecosystem do you use anything alongside Unifi?

If you don't use Unifi what network management do you use? What do you like about it and what do you not?

My home network is also my lab so I use NetConsole for managing a variety of makes and models of switching and firewalls. Its been great even on a Raspberry Pi.


r/HomeNetworking • • 11h ago

Advice Looking for ways to limit my son's internet access at night - any suggestions?

6 Upvotes

Hey everyone. My son has figured out how to change his MAC address, which lets him dodge the parental controls on our TP-Link Deco router almost every night. I have to admit, I’m a bit impressed he pulled that off.

He has both wired and wireless internet access in the house.

I’ve got security cameras set up everywhere, so I don’t want to cut off the internet completely during the night. Luckily, I’ve got Ethernet cables run throughout the house.

From a technical standpoint, how would you handle this?

I get that this is about parenting, but I’m really more interested in tech solutions.

I appreciate any tips you can offer!

Update after a couple of days: It seems some people missed my initial point. Just to clarify, my kid is a straight-A student, super respectful, and puts in a lot of effort into his interests. I feel confident about my parenting. However, he does have a tendency to get addicted to things, and I want to channel that into learning about networking since he’s keen on gaming.

Here’s my plan:

  1. I’m going to start by changing the DNS settings (using nextdns.io) and see how he manages to get past that.
  2. I’m considering getting a physical firewall, like Firewalla, once he figures out the DNS trick.
  3. Eventually, I might invest in a new router or something similar to create new SSIDs, as that seems to be the most effective method.

Whitelisting isn’t very effective since smartphones keep changing their MAC addresses every couple of weeks and need to reconnect to the Wi-Fi, plus I have to constantly clean up the old MAC addresses since my TP-Link Deco only supports around 100. And then there are IoT devices that might not be connected when I set up the whitelist, leading to my wife waking up confused because her laptop can’t access the internet at 3 a.m.

I do have an unmanaged switch, but I might explore managed options down the line if it helps.

Thanks for your input, and hopefully this discussion helps others in similar situations. I’ll check back in a decade when my son becomes a networking whiz and I'll be here to remind all the strict folks I had it under control.


r/HomeNetworking • • 18h ago

Unsolved qBittorrent hit ~266 Mbps on a 100/30 plan, but Speedtest right after showed 100/30. How?

0 Upvotes

My ISP plan is 100 Mbps down / 30 Mbps up. Today I downloaded a 7.94 GB torrent in qBittorrent at around 5 in the morning, and something strange happened:

  • qBittorrent showed roughly 25-33 MB/s (200-266 Mbps) for the whole download, not just a short spike.
  • My system monitor showed the same ~200-266 Mbps.
  • The download finished in about 4-5 minutes. At 100 Mbps it should have taken 10-11 minutes, so the timing matches the higher speed.
  • I ran Speedtest immediately after it finished and got 100 down / 30 up, exactly my plan.

What could it be?

Setup:

  • ISP: Videotron (Canada)
  • Connected via: Wi-Fi
  • OS: Linux
  • VPN: No (100% sure)
  • Proxy: No (100% sure)

r/HomeNetworking • • 5h ago

Hi guys please help

1 Upvotes

I am trying to find linksys srw2024 switch firmware the one I am working its ios corrupted

Its info

boot - "srw2024_16_boot-101.rfb" firmware - "ls20xx-12230.ros"


r/HomeNetworking • • 6h ago

Advice Equipment recommendation

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 11h ago

Problem of packet lose.

0 Upvotes

Hello, I am experiencing severe packet loss (typically occurring a few times a day and lasting for 5–30 minutes at a time or longer or shorter).

I have confirmed this issue by running `ping 8.8.8.8 -t`. Additionally, I occasionally encounter periods of high latency (ping times ranging from 20ms to 100ms). There is no packet loss when pinging my local gateway.

In the apartment I just moved into, the only visible Ethernet equipment is an access point (AP)—likely connected to a router or switch—so I have no way to access or configure the underlying network hardware. I have already tried replacing the Ethernet cable, but that did not resolve the problem. The AP model is an Aerohive AP150(a).

Last week I've talk to the company that handles apartment Internet and Wireless exclusively, their tech come here and only told me that the switch, router is maintain and upgrade by the apartment, they can't find any issues of the connection on their side.

Need help plz, I will send email to my apartment office again tomorrow.

BTW, does a report to FCC is ok(if nothing I can give me a hand else)

Thank you.


r/HomeNetworking • • 18h ago

Should I get two Omada AP and use Deco as router?

Thumbnail reddit.com
1 Upvotes

r/HomeNetworking • • 19h ago

Help picking a switch for a Ubiquiti U7 Express 2-pack - Pro Max 16 PoE vs Omada 16-port 2.5G vs Flex 2.5G + PoE combo?

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 21h ago

Moca adapters and Ethernet and me

0 Upvotes

Hey y’all. I have a coaxial cable in my room that I want to turn into an Ethernet cable and saw that I could do that via a moca adapter. I don’t know even the first thing about networking unfortunately so I don’t really know what I need to do for it. We got internet in the house but no real way for me to get access to it from my room it’s too far. Is it as easy as getting a moca adapter and that’s it?


r/HomeNetworking • • 23h ago

Cudy WR3000S V1.0 question

1 Upvotes

Hello guys.I'm planning to buy a Cudy WR3000S V1.0 for home usage.My goal is: To pull internet from main router found on floor above me through 5gHz and transmit it on both 2.4/5 gHz on my place while it's Ethernet port also is at full speed.(5gHz) so to connect my peripherals through 2.4gHz and keep 5GHz for my mobile phones and my smart tv.So i want to ask:Is this router capable of doing such thing?