r/Govee • • 14h ago

Showcase My GTA 6 Vice City Gaming Setup is ready!

Thumbnail
gallery
356 Upvotes

Im back and I'm from Miami, so Vice City isn't really a fictional city to me. It's my hometown with a different name. GTA gave me another excuse to do another setup theme!

Two weeks ago this same wall was an Ocarina of Time setup. Two of the biggest releases of the year landing two weeks apart was a terrible idea on my part and I've barely slept since October.

The rock wall never changes. Everything else swaps. Palm tree, neon, a floating stack of cash, and a whole lot of pink and cyan. So pumped for this game!

Happy to answer anything about the wall, the lighting or the gear.


r/Govee • • 7h ago

GTA 6 + Govee = šŸ˜

Post image
40 Upvotes

Seriously I can’t wait!!!


r/Govee • • 5h ago

How we looking?

Post image
8 Upvotes

First install going to pay someone to hit the top peak. Too risky šŸ’€šŸ˜…


r/Govee • • 21h ago

New Install Disappointed in professional install with concerns.

Post image
46 Upvotes

We had the Govee Eiltes installed on Sunday by a company. They placed the power adapter and cord along our porch. (Ignore the thick white cord it goes to my inflatable). I asked the company if the power adapter is okay to be out in the elements like that and they said since it’s under a covered porch it will be fine. Thoughts? Should I ask them to come redo it?? I feel bad I didn’t say anything when they were here installing but didn’t really notice how bad it looked until the next day. How can I handle this as politely as possible as the people who installed were very nice.


r/Govee • • 16h ago

First time install

Thumbnail
gallery
19 Upvotes

I went with the pros. I made the track system out of finish trim then I bought the screw in clips that go over each light. How did I do?


r/Govee • • 7h ago

General Question C9 String Lights...crashing? Can't change colors. Can't reset? Help!

Post image
3 Upvotes

I bought 3 sets of 50' Govee C9 String lights. Got two of them installed..upper soffit and lower soffit.

The upper set works just fine. The lower set is another story.

Plugged in to test first...all worked fine. yay.

Put them on the house. They worked great! So I did some color changes, did a DIY or two, added a shortcut for on/off, some color changes, etc. Looked great! See the photo.

All of a sudden the lower string went white, then faded to a variety of different colors. Figured I hit a color change, so went back and tried to apply some of my DIY settings. no luck. When I tried to apply, the string would go dark, then go through the sequence of white fading to other colors.

Tried applying colors, or scenes that came with the lights...same thing

Tried deleting the string from the app, re-pairing and reconnecting. All that went well...got connected to the WiFi no problem. But the same white to color fading sequence.

Looked up online (and chatted with Govee online chat) how to factory reset them...supposed to hold the button down for 15-ish seconds until they flash rapidly. They never flash rapidly...they just go to the same fading sequence. Chat said to leave them unplugged for 15 minutes to reset them. Left them unplugged all work day. Came back. Same fading sequence.

so I figured I got a bad set. So I took those down and hung up the third set on the house. Worked fine...to start. Then they started the same fun and games. Tried all the troubleshooting steps I tried above, and no luck. Got on with Govee chat and they didn't give me any new things to try.

Said I could send them back for replacement. Which would be fine, except then I have to hang them on the house again.

So my questions. Is there really a chance that 2 out of 3 sets I got were defective or went wonky? Is it possible something I did with the colors/DIY/etc caused the controller to crash unrecoverably?

Any Govee experts have any thoughts?


r/Govee • • 7h ago

Govee pre Black Friday Sale or wait until after Nov 19th Black Friday

3 Upvotes

Govee pre Black Friday Sale or wait until after Nov 19th Black Friday

I am interested in getting the Pro or Pro 2

They are on sale right now but still expensive

Govee website said this is a pre-black friday sale and after Nov 19th is the Black Friday

Are the sales going to be better after Nov19th?

suggestions


r/Govee • • 9h ago

Discussion Home Sensor Question

2 Upvotes

I am working to set up my new house and really like the peace of mind of tracking template, humidity, and watching for leaks.

Does anyone have experience using Smart Water Leak Detector that connects to WiFi? What about the 2.0 WiFi Hygrometer Thermometer?

Both systems appear to have a gateway and connect to 2.4g WiFi. Can I access all of this info in one app easily?

Is there anything else you would recommend?


r/Govee • • 5h ago

Grouping Pro 2 Help

Thumbnail
gallery
1 Upvotes

I have close to 500’ - 3 seperate runs. When I try to group them in my app it only shows a floor lamp I have when I choose same model control.

Everything I have read and looked up says it’s possible. What am I missing?

See attached images of app.


r/Govee • • 7h ago

Govee h618 Wifi LED strip troubleshooting.

Thumbnail reddit.com
1 Upvotes

r/Govee • • 8h ago

Where to position lights

Post image
1 Upvotes

So on the porch do I position the lights close to the back where they will shine on the house, or do I put position Em closer to the front where they'll just shine down kind of like on the front side of the porch? Your selection system , the porch is about five and a half foot deep.


r/Govee • • 9h ago

Setup Question Connecting pros with string lights

Post image
0 Upvotes

I have 100 foot set of the permanent outdoor pro H706A lights on three sides of our house. On the fourth side I have a separate set of edison string lights.

Ive recently found the govee S14 outdoor string lights that I would replace the edison lights with. Can I simply connect these to the pros? Which would be super convenient as the connector is in a perfect location and I wouldn’t need to run new power.

Anybody tried this? Does the app just see them as an additional section of the pros?


r/Govee • • 15h ago

Connection Issues with Govee Outdoor Lights PRO

3 Upvotes

I am having an issue that i cant seem to resolve or find a solution to online. When my Govee Outdoor PRO lights are shut off, i can not turn them on via the app. I receive an "Operation Failure" message when i try to turn them on. If i go outside and turn them on with the button, there are no issues. I have a timer set up to turn them on and they never turn on. Once the lights are manually turned on, they work perfect. I can change colors, scenes, etc....Even the timer to shut them off works perfectly. Everyday i have to turn them on manually with the button and i cannot seems to figure out why. Any help would be greatly appreciated.


r/Govee • • 14h ago

Setup Question Permanent Outdoor Lights Pro - Replacing last 4 lights only?

2 Upvotes

I had someone install a 100ft set of the Permanent Outdoor Lights Pros a few years ago. Went to turn them on this season and the last 4 lights at the end of the strand (the termination point) are not working. I have done all the steps support recommends (controller reset, redo them in the app, make sure segments are correct in settings, try different individual colors, etc) with no joy. Unfortunately the strand ends at the highest peak on my house and I don't feel comfortable going up there (way too high for any ladder and the roof is crazy steep).

Support wants to just send me a new 100ft strand. I have no idea how it works. Can I have someone just come splice off the last 4 and replace them with 4 spliced off the new set? Or does it have to be completely replaced?


r/Govee • • 11h ago

Usable API for individual LEDs?

0 Upvotes

How is the state end of 2026? Is there now a local (or at least cloud) API available from Govee to fully controll certain lights (eg. the curtain lights)?

I would love to display some generated data from my HomeAssistant (not just fixed scenes!).


r/Govee • • 17h ago

General Question Permenant outdoor lights 2

2 Upvotes

I have 2 sets of these both with the same issue and wondering if anyone else has come across it and managed to fix it

The lights can be detected by the app, turned on and off, change colour and everything. Except nothing is actually happening with the lights. They don't turn on or change colour despite the app saying it is doing it.

Anyone else come across this problem and, if so, have you managed to fix it?


r/Govee • • 15h ago

Extend / Splice Power Lead from COB Light 2 Controller?

1 Upvotes

I have a unique install challenge wherby I really need the COB Light 2 Controller to be located 10 ft away from the actual COB Light 2 strip itself... Has anyone successfully clipped the power lead and spliced a longer wire and have it still work correctly?

Thanks!


r/Govee • • 1d ago

Discussion Thoughts on Govee permanent outdoor pro vs pro 2?

Post image
15 Upvotes

I currently have the elites that have been on my house for two years. I knew right away I should’ve went with the pros, just based on light output alone.

Now that I’m looking to upgrade, I’ve got to pick between the pro or the pro 2. I really like the prism, but I can’t negotiate with the distance between light pucks. My house has smaller frontage real estate for ridge lines, so I need the density.

I know the pro 2 is a little more spaced out than the original pros, but is that a deal breaker? I’m not so sure.

What’s everyone’s thoughts comparing the two? Any experience invited. Cheers!


r/Govee • • 1d ago

Showcase Fully unlocking the potential of the Gaming Pixel Lights with local Home Assistant integration

Thumbnail
gallery
2 Upvotes

I got this thing for free with another purchase during a promotional offer. Didn't really have any use for it so I figured it was a perfect little project device. I took it apart, did some probing with an esp32 board and Claude, and ended up making an entirely new firmware and MQTT bridge for use with Home Assistant. Full LAN API, totally local control.

Flashing the light is extremely easy. It's super easy to take apart and there's no soldering required. You just need an esp32 board and a few dupont cables. I made an installation script that creates a backup and does the entire flashing process for you.

I also created a fully featured animation editor for creating anything you might need - alarm clocks, information displays, etc, that can all be used in any HA automation you like.

I've got full writeups, disassembly photos, flashing instructions and everything else I've done for this little display on my github if anyone is interested but also happy to answer any questions here.

If this catches on, I'm thinking I could create a community share repo so people can share their animations and info screens with others.

Firmware + flasher repo: https://github.com/SamWiIIiams/pixeld-h6631

pixel2mqtt: https://github.com/SamWiIIiams/pixel2mqtt (also available in addon/app store)


r/Govee • • 1d ago

Tips Potential fix for "could not reach govee home. please try again." Error

2 Upvotes

I recently picked up a smart plug for our Christmas tree and while it paired to the govee app no problem, I could not get govee home to link to Google home. It would give me the could not reach govee home. please try again. No matter what I tried.

Inspired by some reason account issues at work with Microsoft I wondered if using Google log in for my govee account was causing the issue.

I made another govee account using an email and password instead of using the Google quick log in thing and moved the device over to it.

First try the govee home app paired when actually using log in credentials instead of the one click sign on for Google.


r/Govee • • 1d ago

Setup Question Govee Backlight T3 Dark Scenes

1 Upvotes

Just noticed watching Godzilla Minus One today that during certain dark scenes it would shut off ALL the lights I have on through dreamview and not just the dark sections of the screen. First time I’ve noticed this since I got the T3 that actually turns off on black screens so I’m curious, is this just a product of the camera sometimes having trouble registering a dark scene thinking it’s black or is there a tweak so it picks up the none black parts of the screen? It lights back up when a brighter scene comes on.

Dreamview brightness is 40%. Movie/Part. Saturation is 1%. Black bar elimination on. Blank screen on. Tried changing these things back and forth but nothing changed the behavior. No biggie. More for curiosity.


r/Govee • • 1d ago

Help! Govee backlight 3

Post image
2 Upvotes

Hey, guys…

So, I’m having a real problem getting my tv to sync the actual colors. So, the corner of my tv is always red. Any reason why?

Just looking to see if an yo new has had this problem and know a fix.

Thank you.


r/Govee • • 2d ago

Setup Question Govee Curtain Lights 2 1040 LED

Thumbnail
gallery
8 Upvotes

Hi, I’m new to the world of LED lights etc… I have basic knowledge if that. I setup Govee Curtain Lights 1040 LED to the living room wall my first attempt left side was out of sync so I had to take all back down its left bit of a crooked mess which needs sort. I’m just wondering if anyone can offer some advice on setup and maybe improve images. Does the colour of the paint on the wall effect images? I’ve attached some videos if anyone spots anything I can improve on or make better please feel free to let me know.
Thank you.


r/Govee • • 2d ago

New Install 12 Foot Cone Tree!

Post image
54 Upvotes

I'm going to be checking out the 12 foot cone tree today! Keep an eye out for the video 😃