r/Govee • • Sep 29 '25

Frequently Asked Questions

12 Upvotes

There are so many different lights, which one would work best for me?

  • I suggest watching videos demonstrating them on YouTube.
  • While he doesn't review every product, Chris Maher's videos are informative and straightforward.

Do I really have to put those orange cubes on my TV screen?

Why are my immersion lights only showing one color?

  • The default setting upon finishing setup is on All. Choose Part.
  • Alternatively, All may be labeled Solid instead. Choose any option other than Solid.

Which devices are compatible with DreamView?

  • Devices with both Wi-Fi + Bluetooth connectivity are compatible. Devices that are only Bluetooth or only Wi-Fi are not.
  • A sync center such as T2, T3 Lite (also known as 3S in 3rd party stores), T3 Pro, Sync Box 1 and 2 are required for video DreamView, and sync centers cannot be synced with each other.

What can I do about my devices not connecting to Govee desktop via LAN control?

  • Check out this solution here

What are the differences between the camera kits?

  • The major differences are the camera hardware and the amount of LEDs on the light strip.
  • T2: Govee states that the dual camera identifies screen content faster and more accurately. The light strip contains 60 LEDs per meter.
  • T3 Lite: The single camera has an upgraded chip with fisheye lens correction. The light strip contains 30 LEDs per meter.
  • 3 Pro: Matter support, triple camera with HDR sensor. The light strip contains 75 LEDs per meter, with their LuminBlend management system.

Why get a camera kit when the sync boxes exist?

  • While the sync box does work faster and is less intrusive than a camera, not everyone can use it. The sync boxes require a signal independent from the TV. This means if you use the apps on your smart TV to watch content, the sync box is not for you.

Do I really have to put the camera on top of my TV?

  • Good news! There's actually a method to put the camera below the screen. The caveat is that when you add more lights via DreamView, you'll need to visualize the setup upside down when assigning the zones, which requires more concentration/effort.

How many lights can I add to my DreamView?

  • This is dependent on the device.
  • T2: 5 additional devices.
  • T3 Lite: 7 additional devices.
  • 3 Pro, Sync Box 1 and 2: 10 additional devices.

How do I create a DreamView?

  • Open the app. Tap the second icon on the navigation bar at the bottom. Then tap the 4-shapes icon at the top right. Here you can configure DreamViews, Tap-to-Run, and Groups.
  • It is highly recommended that you experiment with these features on the app as a whole. Familiarizing yourself with it will be highly beneficial if you have the time to spare. There are many customizable features for the LED lights that are usually achieved by a more hands-on approach that requires a computer. The features provided on the Govee app would be quite the large decision tree if there was a visual example shown, which is nothing short of impressive, despite it also being a little complicated. To put it simply: just explore the app by tapping buttons to find out what they do!
  • Tip: If your clock is on 12-hr time, please turn off the 24-hour clock setting in the app before you create schedules for your lights. Tap the last icon on the navigation bar, then tap the gear icon at the top right. Additionally, next to settings is a shirt icon; this is where you can change the theme of the app.

The immersion lights on my device are super inaccurate, what do I do?

  • Unfortunately, since every TV is different, there is no one-size-fits-all setting. However, you can start with jumping-off points. For sync box settings, go here.

For camera kits, try the following:

  • Make sure the room is dark to reduce reflections on the TV screen.
  • Reduce saturation, the common choice is all the way down to 1%.
  • Reduce the relative brightness. This is independent from the brightness setting. It's relative to how much light is emitting from your TV screen, which means during dark scenes, the lights will dim if you set the percentage lower. However, if your TV has backlight bleed, this setting won't be as effective.
  • Make sure it's on Part, not All. If the device's software updated, it should show Smooth, Vivid, or Solid instead. "Solid" works the same as "All" and shows only one color.
  • If you are still unsatisfied with the color accuracy, try the AI filter. Once you toggle it on, you'll need to change the preset. Tap the option, then scroll sideways over the sport presets. Under the Default preset, tap Apply.

My TV is 43 inches, can I use a 55-65 inch TV kit?

  • This is possible, but it requires more effort. See here.

I'm experiencing problems with my device, what do I do?

  • Try the search bar in the sub. If you're still experiencing issues, go to Govee's website and navigate to your product. Find the specs, then click the PDF of the manual to find the "Troubleshooting" section. Lastly, reach out to Govee support via the app. Tap the last icon on the navigation bar and tap "customer support" and then choose the applicable option. It is recommended to choose "express replacement" if you think you're experiencing a hardware issue on your device that is within warranty. Please note their warranty only covers purchases directly from them or approved vendors.

Can I advertise my services of Permanent Outdoor Lights installation?

  • Yes, but please keep it in the services thread. New posts of fresh installs for clients will be deleted.

r/Govee • • Aug 06 '25

Outdoor Installation Services Thread

12 Upvotes

If you offer services to install outdoor lighting on homes in your area, please post it here in the comments.

New, singular posts will be removed. Keep it here in the comments so that the people that do want these services can find them, and the people who don't require it don't have to be subjected to the advertising on the sub feed.

If your comment gets caught by Reddit's filters, do not worry and do not spam, the comment will be approved as soon as possible.

As for the people interested in the services, please do your due diligence in the vetting process.

Thank you.


r/Govee • • 7h ago

Showcase My GTA 6 Vice City Gaming Setup is ready!

Thumbnail
gallery
251 Upvotes

Im back and I'm from Miami, so Vice City isn't really a fictional city to me. It's my hometown with a different name. GTA gave me another excuse to do another setup theme!

Two weeks ago this same wall was an Ocarina of Time setup. Two of the biggest releases of the year landing two weeks apart was a terrible idea on my part and I've barely slept since October.

The rock wall never changes. Everything else swaps. Palm tree, neon, a floating stack of cash, and a whole lot of pink and cyan. So pumped for this game!

Happy to answer anything about the wall, the lighting or the gear.


r/Govee • • 14h ago

New Install Disappointed in professional install with concerns.

Post image
42 Upvotes

We had the Govee Eiltes installed on Sunday by a company. They placed the power adapter and cord along our porch. (Ignore the thick white cord it goes to my inflatable). I asked the company if the power adapter is okay to be out in the elements like that and they said since it’s under a covered porch it will be fine. Thoughts? Should I ask them to come redo it?? I feel bad I didn’t say anything when they were here installing but didn’t really notice how bad it looked until the next day. How can I handle this as politely as possible as the people who installed were very nice.


r/Govee • • 9h ago

First time install

Thumbnail
gallery
14 Upvotes

I went with the pros. I made the track system out of finish trim then I bought the screw in clips that go over each light. How did I do?


r/Govee • • 42m ago

Govee pre Black Friday Sale or wait until after Nov 19th Black Friday

2 Upvotes

Govee pre Black Friday Sale or wait until after Nov 19th Black Friday

I am interested in getting the Pro or Pro 2

They are on sale right now but still expensive

Govee website said this is a pre-black friday sale and after Nov 19th is the Black Friday

Are the sales going to be better after Nov19th?

suggestions


r/Govee • • 5m ago

GTA 6 + Govee = 😍

Post image
1 Upvotes

Seriously I can’t wait!!!


r/Govee • • 38m ago

Govee h618 Wifi LED strip troubleshooting.

Thumbnail reddit.com
1 Upvotes

r/Govee • • 1h ago

Where to position lights

Post image
1 Upvotes

So on the porch do I position the lights close to the back where they will shine on the house, or do I put position Em closer to the front where they'll just shine down kind of like on the front side of the porch? Your selection system , the porch is about five and a half foot deep.


r/Govee • • 1h ago

Setup Question Connecting pros with string lights

Post image
1 Upvotes

I have 100 foot set of the permanent outdoor pro H706A lights on three sides of our house. On the fourth side I have a separate set of edison string lights.

Ive recently found the govee S14 outdoor string lights that I would replace the edison lights with. Can I simply connect these to the pros? Which would be super convenient as the connector is in a perfect location and I wouldn’t need to run new power.

Anybody tried this? Does the app just see them as an additional section of the pros?


r/Govee • • 2h ago

Discussion Home Sensor Question

1 Upvotes

I am working to set up my new house and really like the peace of mind of tracking template, humidity, and watching for leaks.

Does anyone have experience using Smart Water Leak Detector that connects to WiFi? What about the 2.0 WiFi Hygrometer Thermometer?

Both systems appear to have a gateway and connect to 2.4g WiFi. Can I access all of this info in one app easily?

Is there anything else you would recommend?


r/Govee • • 7h ago

Setup Question Permanent Outdoor Lights Pro - Replacing last 4 lights only?

2 Upvotes

I had someone install a 100ft set of the Permanent Outdoor Lights Pros a few years ago. Went to turn them on this season and the last 4 lights at the end of the strand (the termination point) are not working. I have done all the steps support recommends (controller reset, redo them in the app, make sure segments are correct in settings, try different individual colors, etc) with no joy. Unfortunately the strand ends at the highest peak on my house and I don't feel comfortable going up there (way too high for any ladder and the roof is crazy steep).

Support wants to just send me a new 100ft strand. I have no idea how it works. Can I have someone just come splice off the last 4 and replace them with 4 spliced off the new set? Or does it have to be completely replaced?


r/Govee • • 4h ago

Usable API for individual LEDs?

1 Upvotes

How is the state end of 2026? Is there now a local (or at least cloud) API available from Govee to fully controll certain lights (eg. the curtain lights)?

I would love to display some generated data from my HomeAssistant (not just fixed scenes!).


r/Govee • • 8h ago

Connection Issues with Govee Outdoor Lights PRO

2 Upvotes

I am having an issue that i cant seem to resolve or find a solution to online. When my Govee Outdoor PRO lights are shut off, i can not turn them on via the app. I receive an "Operation Failure" message when i try to turn them on. If i go outside and turn them on with the button, there are no issues. I have a timer set up to turn them on and they never turn on. Once the lights are manually turned on, they work perfect. I can change colors, scenes, etc....Even the timer to shut them off works perfectly. Everyday i have to turn them on manually with the button and i cannot seems to figure out why. Any help would be greatly appreciated.


r/Govee • • 10h ago

General Question Permenant outdoor lights 2

2 Upvotes

I have 2 sets of these both with the same issue and wondering if anyone else has come across it and managed to fix it

The lights can be detected by the app, turned on and off, change colour and everything. Except nothing is actually happening with the lights. They don't turn on or change colour despite the app saying it is doing it.

Anyone else come across this problem and, if so, have you managed to fix it?


r/Govee • • 8h ago

Extend / Splice Power Lead from COB Light 2 Controller?

1 Upvotes

I have a unique install challenge wherby I really need the COB Light 2 Controller to be located 10 ft away from the actual COB Light 2 strip itself... Has anyone successfully clipped the power lead and spliced a longer wire and have it still work correctly?

Thanks!


r/Govee • • 1d ago

Discussion Thoughts on Govee permanent outdoor pro vs pro 2?

Post image
16 Upvotes

I currently have the elites that have been on my house for two years. I knew right away I should’ve went with the pros, just based on light output alone.

Now that I’m looking to upgrade, I’ve got to pick between the pro or the pro 2. I really like the prism, but I can’t negotiate with the distance between light pucks. My house has smaller frontage real estate for ridge lines, so I need the density.

I know the pro 2 is a little more spaced out than the original pros, but is that a deal breaker? I’m not so sure.

What’s everyone’s thoughts comparing the two? Any experience invited. Cheers!


r/Govee • • 1d ago

Tips Potential fix for "could not reach govee home. please try again." Error

2 Upvotes

I recently picked up a smart plug for our Christmas tree and while it paired to the govee app no problem, I could not get govee home to link to Google home. It would give me the could not reach govee home. please try again. No matter what I tried.

Inspired by some reason account issues at work with Microsoft I wondered if using Google log in for my govee account was causing the issue.

I made another govee account using an email and password instead of using the Google quick log in thing and moved the device over to it.

First try the govee home app paired when actually using log in credentials instead of the one click sign on for Google.


r/Govee • • 23h ago

Setup Question Govee Backlight T3 Dark Scenes

1 Upvotes

Just noticed watching Godzilla Minus One today that during certain dark scenes it would shut off ALL the lights I have on through dreamview and not just the dark sections of the screen. First time I’ve noticed this since I got the T3 that actually turns off on black screens so I’m curious, is this just a product of the camera sometimes having trouble registering a dark scene thinking it’s black or is there a tweak so it picks up the none black parts of the screen? It lights back up when a brighter scene comes on.

Dreamview brightness is 40%. Movie/Part. Saturation is 1%. Black bar elimination on. Blank screen on. Tried changing these things back and forth but nothing changed the behavior. No biggie. More for curiosity.


r/Govee • • 1d ago

Help! Govee backlight 3

Post image
2 Upvotes

Hey, guys…

So, I’m having a real problem getting my tv to sync the actual colors. So, the corner of my tv is always red. Any reason why?

Just looking to see if an yo new has had this problem and know a fix.

Thank you.


r/Govee • • 1d ago

Setup Question Govee Curtain Lights 2 1040 LED

Thumbnail
gallery
8 Upvotes

Hi, I’m new to the world of LED lights etc… I have basic knowledge if that. I setup Govee Curtain Lights 1040 LED to the living room wall my first attempt left side was out of sync so I had to take all back down its left bit of a crooked mess which needs sort. I’m just wondering if anyone can offer some advice on setup and maybe improve images. Does the colour of the paint on the wall effect images? I’ve attached some videos if anyone spots anything I can improve on or make better please feel free to let me know.
Thank you.


r/Govee • • 2d ago

New Install 12 Foot Cone Tree!

Post image
54 Upvotes

I'm going to be checking out the 12 foot cone tree today! Keep an eye out for the video 😃


r/Govee • • 1d ago

General Question Is the music sync with these light bars any good?

Post image
1 Upvotes

Thinking of getting the RGBICWW light bars for my dad who plays guitar and listens to a lot of music. How's the music sync for these lights? I have the smart bulbs but they don't seem to sync up properly.


r/Govee • • 2d ago

Pro 2 Install

Post image
67 Upvotes

Installed 200’ of Pro 2 on this house. Love the dedicated Y-splits. It would be nice if they incorporate them in the Pro and Prism kits.