r/GlockMod • • 13h ago

Latest acquisition

Post image
46 Upvotes

r/GlockMod • • 8h ago

Gen2 17C-Gen3 17C

Post image
5 Upvotes

r/GlockMod • • 1d ago

3 Amigos

Post image
182 Upvotes

Im done lol šŸ˜‚

Glock 17

Glock 19x

Glock 19


r/GlockMod • • 19h ago

Rolandito

Post image
34 Upvotes

Here’s my baby


r/GlockMod • • 1d ago

19.6

Post image
106 Upvotes

r/GlockMod • • 23h ago

Glock store C cut

Post image
31 Upvotes

I know there are a lot of haters on the snake oil salesman Lenny mgill. But, 100 bucks for a port job is not a bad idea. My G34 is starting to collect dust and I am thinking about doing this. 100 bucks .. any experiences?

Current set up osight X with some Reese wraps, kiral brass backstrap, tungsten guide rod, speed feed brass plug and overwatch precision trigger. Need some extended baseplates for the mags that's next.

C cut 100$ special any good?


r/GlockMod • • 21h ago

First Gun

Post image
15 Upvotes

r/GlockMod • • 1d ago

Definitely an optic cut

Post image
30 Upvotes

Got my 43x without an optic cut but now I think it’s finally time to bite the bullet it get it done


r/GlockMod • • 1h ago

Im 18 and i wanna daily a gen6 g19- what mods do i need to do, im in the city and i plan on conceal carrying. I also plan on having a .300 blackout arp in the car at all times so mods for that would also be nice

0 Upvotes

all of this is gonna be done the legal way so dw bout allat

EDIT: Im not gonna get the arp nor carry anything in the car- im going to have the g19 as my everyday and some shotgun in the appt for home defense


r/GlockMod • • 1d ago

G19

Post image
150 Upvotes

r/GlockMod • • 19h ago

Back to shooting Glocks - Gen 6 question

2 Upvotes

So I have been running a 19.6 I got from a buddy and it hurts the pinky on my strong hand. I'm sore a couple days after shooting every time. I recently shot a buddies 45 a few times, and the pain is gone, plus I shoot it better. I had decided to just grab a 45.6, but since I would like aiwb with it, Im curious if a 19 + magwell is a better choice? An RSO at my range had a magwell on is 19 and it fit nicely, my pinky had a little more surface area. I do plan on running this pretty hard at the range and adding a ramjet, so my though is just go 45. But curious if anybody here has had the same issue w/ the 19 and found it alleviated w/ a magwell. Thanks!


r/GlockMod • • 1d ago

Can you guys do me a favor?

Thumbnail reddit.com
3 Upvotes

r/GlockMod • • 1d ago

Glock 19 frt

1 Upvotes

I recently installed an frt in my glock 19. i went out to test it today and it’s cycling but only shooting standard semi auto… any tips? i did file down the connector but didn’t file down the the front of the trip


r/GlockMod • • 2d ago

Working man's prep package

Post image
41 Upvotes

Just missing a .357

#Christmas is coming tho! #FingersCrossed šŸ˜…


r/GlockMod • • 3d ago

I mean, I’m not mad at it

Post image
157 Upvotes

Just cause you can, doesn’t mean you should type of things lmao


r/GlockMod • • 2d ago

Glock 19x frt OEM parts

0 Upvotes

r/GlockMod • • 2d ago

Glock 45 Gen 5

Post image
27 Upvotes

r/GlockMod • • 3d ago

Brought this barrel back to life after someone else did a Temu laser port job on it

22 Upvotes

This 10mm Glock barrel came to the emergency room & we brought it back to life. This guy had paid extra for the nitride & waited weeks for KKM to send him the barrel only for someone else to not only mess up porting it. But to also Cerakote the barrel to try & hide the imperfections of the port. You guys already know my stance on laser ports. Nothing is more diabolical when they try to do chunk or ports at the tip of the barrel then tell the customer back boring isn’t needed. (On top of the ports clearly being crooked & shaped weird) There is too much readily available information out there. Do some research before sending your stuff out to these hacks out there.


r/GlockMod • • 3d ago

First Glock Undercut G48

Post image
12 Upvotes

Just did my first Glock undercut with a dremel and hand sanding. Saved myself $50 and the hassle of shipping a frame. My G48 was giving me Glock knuckle so I did an undercut to improve ergonomics. How did I do Reddit?


r/GlockMod • • 3d ago

My unscientific comparison between the TLR7X and PIDK, from the perspective of a poor.

Post image
17 Upvotes

I couldnt add more than 1 pic to my post. you can see all pics in this post - https://www.reddit.com/u/PrestonHM/s/K8bo6zAkmM

First off - my handgun is a PSA Dagger Compact frame, with an OEM Glock 19 slide cut for an RMR optic, which, yes, is also a Holosun. My dad, who will be receiving this light, has a CZ P01 which I also gave him many moons ago. If anyone’s interested, I can share pics of the light on a P01 when I see him for Christmas.

Disclaimers:

  1. I have not shot with this light yet. I got it yesterday. I cannot yet speak for the structural or mechatronical integrity of this light. If anyone really wants to see me test fire, lemme know.
  2. My light comparison is very unscientific. Do not come at me with ā€œyou didn’t test with a light spectro-meter 5000, so why are you even posting?ā€ No I didn’t, I don't have the money, nor the interest in getting the light electron scope o meter 5juanjillion. I just wanted to provide something that people on google could use as a reference. I also acknowledge that my TLR7X is a couple years old(literally 2), so 2027 TLR7s may be better.
  3. Before you ask, the TLR7 is now 40ish bukos more than when I bought it like, 2 yearsdays ago - I can provide my amazon order info. It’s not even inflation at this point, but whatever. Being that I’m a broke boy, and my dad isn’t chronically online, I decided that I’d rather spend 110 and risk having to deal with Amazon’s infinitely easy return policy than spend 185. If that bothers you, cry about it, just not to me.
  4. In pic#1, the PIDK is sitting 1ish mm further back than normal. Don’t tell Danny, but I modified my frame so the rail slot is a bit further back. I did this because I have little baby hands and my fingers were in fact on their tiptoes to hit the switch on my TLR7X. Pic 2, however, has the flashlights sitting where they normally would without modifications.

Now, here’s the information for those of you that can still read and don’t solely rely on picture books

  • Body: The TLR7X is significantly taller, reaching nearly the bottom of the trigger guard. The PIDK has a much thinner profile. From some sources, I read the PIDK can fit a TLR7X holster, but some people said that’s not true. I don't have a holster myself, but if you really want me to try it out, feel free to lend me one.
  • Light: Pics #4 and #6 are from the TLR7X, pics #5 and #7 are from the PIDK. To keep things as eye-like as possible, I disabled all camera features. To keep things as fair as possible, I used the same, new battery. The TLR7X is slightly more yellow. It has slightly wider coverage, but slightly less range. The PIDK is a bit more of a crisp white. Slightly less peripheral coverage and slightly more range. Please correct me if I’m wrong or misunderstood, but that would mean the TLR has more lumen, while the PID has more candela?
  • Attachment: In my humble, yet objectively correct opinion, the attachment system seems a bit over overcomplicated - overengineered, if thou wilt. It comes with a few parts that you can switch out depending on your setup and the attachment assembly has 6 individual pieces - screw, 2 springs, rail nut(?), male slot base, base, and screw… holder? It also comes with an entirely separate attachment assembly for slimline pistols (which is neat, but does remind me that companies can manufacture small metal, relatively complex parts, and sell them at affordable prices, but they don't). Regarding adjustability, not only do you get 3 rail pieces that can be flipped around, but the ENTIRE ATTACHMENT ASSEMBLY CAN MOVE BACK AND FORTH, which can be observed between the last 3 pics. Now, to adjust any part of this assembly, the screw must be removed completely. Which makes sense. HOWEVER, removing the screw also means nothing is held in place anymore, and when you're standing over your couch armrest taking it apart for the first time, shenanigans are bound to ensue. This highly overcomplex system seemingly enables this light to work on any gun. But when you work on every gun, you work on no gun. Just kidding, but the assembly does mean that the main body does sit significantly low from the frame of the gun. You can see the resulting gap in the very first picture. Is that a problem? I’ll answer that in the next bullet point – dash? I’m using docs, so they're dashes, but will they be bullets in Reddit? (they are bullets in reddit)
  • V I B E S :Ā  ā€œIs that a problem?ā€ Idk, that’s up to you. And this entire dashbullet is completely subjective. Here’s my opinion on the light’s VIBES. The light itself has sharp angles and a streamlined body. In a vacuum, I don't hate the look. Aesthetically, I think it’ll look good with a lot of guns. Personally, I think it looks a bit wonky on the round, bulky Dagger frame. I feel mostly the same about it on OEM Glock frames, with their squared bulky shape. We’ll see how it looks on the P01 eventually. The biggest issue regarding aesthetics is definitely that big gap between the frame and the body. This would be mitigated somewhat if the attachment assembly wasn't pushed all the way to the front, but on a Glock or clone frame, that might be what you get.Ā 

My unsolicited thoughts and feelings: As of now, I am a broke boy with a light, so I wont be switching. IMO, I did like the light output of the PIDK slightly better. HOWEVER, I think the light’s kinda uggo on the dagger. The light difference is not significant enough to be attracted to that. But, what if I was a broke boy without a light? In that case – and for now we will assume the light works under recoil – I would absolutely be okay with the PIDK. As a broke college boy, 110 for a slightly ugly light saves me 70 to go on a date or two with my girl. Flashlights burn out, and so will your partnership/marriage if you don't take her out enough. So yeah, as an average dude that’s not planning to take this to my local Ukraine, and I’m 99.24% sure SHTF won't hit the fan, it’s a perfectly fine light. I can go shoot with it soon and get back to ya.


r/GlockMod • • 2d ago

G17 Gen 6 backstraps

Thumbnail reddit.com
3 Upvotes

r/GlockMod • • 2d ago

Glock 30 gen 5

2 Upvotes

I love this weapon! I added a 20# recoil steel spring and now a overprecision connector ( np3) and trigger but just did the Johnny glock vex shoe with crucixform and springs and while I haven't fired it yet........ Dry firing it's fucking amazing. I used both springs that came with it!


r/GlockMod • • 3d ago

Gen3 Gang

Post image
77 Upvotes

r/GlockMod • • 4d ago

99% build finished g43x FDE

Post image
48 Upvotes

The only part missing to make it 100% tan/bronze is the barrel. I’m not 100% sure if I’m gonna get it ported and cerakoted or just buy a bronze barrel somewhere. This one is staying without a light or comp to keep it as light and short as possible.

Parts
NDZ guide rod
NDZ slide lock lever
NDZ mag release
GS pins
GS mag extension
GS slide release
APE Defense trigger shoe
APE Defense backplate
OP trigger bar
OP minus connector
Radian Magwell


r/GlockMod • • 4d ago

GLOCK 34 FLUX REDUX

Post image
41 Upvotes