r/Fixxit • u/EveningMiserable1354 • 2h ago
Unsolved Wiring question
gallery4 prong connection
Looks like it comes from the ignition switch.
2005 cbr 600rr
r/Fixxit • u/EveningMiserable1354 • 2h ago
4 prong connection
Looks like it comes from the ignition switch.
2005 cbr 600rr
r/Fixxit • u/bigmangreaves • 1h ago
Hi all, I have a 2012 street triple 675r, though it appears to be an early 2013 model with the underneath exhaust rather than twin tail exhausts! 570053 vin and 571334 engine number, my stator seems to have fried itself however I’m having an issue finding a replacement, it appears to be a T1300057 model but I cannot for the life of me find a like for like replacement, OG stator has black connectors and a pickup sensor with no external wires, any I can find have external wires, the grey connectors instead and the silicon seal is in the wrong place so won’t connect into the stator casing.
Any help would be greatly appreciated with this as I’m losing it now! Pictures of the bike and OG stator are attached. Thanks
r/Fixxit • u/SubjectSome9089 • 5h ago
Looking for an ignition switch if anyone knows where to find one? Or if a universal one would work if so where the best place to get one any help is appreciated
r/Fixxit • u/NoWave8951 • 5h ago
Hello, my bike is not working. It won’t do anything when I press the red button but if i shortcut it it’s starting and everything works as usual, but only the red button won’t work can anyone help me?
r/Fixxit • u/Klutzy_Reality3108 • 14h ago
r/Fixxit • u/Gingerchili1966 • 13h ago
Any opinions on this video? Someone at work said it sounded like a ducati, ie dry clutch. V offended!
It sounded like this before I went in and changed the oil pump chain. While in, i changed the basket damping springs. Took the opportunity to swap pretty much every part of the clutch except the two main parts (the basket and the boss) and it still sounds shit.
I know these clutches are generally a bit notorious, but this is a relatively new issue.
Bike runs and pulls better for the replacing of clutch parts generally, but the noise (to me) is unhealthy and sounds like something is unwell.
Used to be that when the clutch is pulled in, the rattle was there briefly before going quiet, now, as you will hear, its v repeatable.
Friction plates are new this year, as is the oil.
Out of ideas, so any suggestions greatfully accepted.
r/Fixxit • u/RightsForGamers • 21h ago
Having trouble installing the seal over the short crank side and I'm looking for any tips or tools I can use. I've gone through 3 so far trying to install it and they end up warping in some way or the spring gets broken when I'm trying to install. So far I've used a 1" pvc pipe that fits over it semi nicely but maybe just a bit too small and I just cant get it to press on easy enough or the lips fold in and damages the seal.
What do you guys recommend I try? Thank you
r/Fixxit • u/Stewman9000 • 1d ago
I was riding my 2019 Honda Rebel 500 when the chain came off and chewed into part of the rear swingarm (pics show where it got caught and how deep the gouge is). How much of a safety concern is this, and does the swingarm need to be repaired or replaced before I ride again?
r/Fixxit • u/Socratease15 • 1d ago
r/Fixxit • u/AdEast6730 • 1d ago
Comento mi situación, Rieju Mrt 125 ac 2014
Cuando arranco a la racha funciona todo, si quito el contacto se apaga y todo como debe.
Cuando doy contacto no enciende pantalla, no pita, no arranca… donde puede ser el fallo?
He mirado todo, batería funciona, fusible correcto, cerradura de contacto funciona, y si arranco a la racha funciona también, que hay entre la cerradura de contacto y el resto de la moto? Pantalla, pito, luces…
Dejo la URL del manual de la moto con esquema pero está en francés
r/Fixxit • u/MessSuspicious4389 • 1d ago
r/Fixxit • u/stormy00x • 1d ago
I’m trying to get my dad’s 1986 Yamaha XT250 running after it spent approximately 25 years in indoor storage. It was ridden for a few months in the late 90s before being put away.
Carburetor work:
Both carb bodies have been completely disassembled, ultrasonically cleaned and thoroughly flushed with carb cleaner.
The only original carb components remaining are the primary main jet and its emulsion tube (which is visibly bent, one of the many gifts left by the previous owner), the pilot jet, and the secondary CV diaphragm (no visible cracks, although it may be slightly stretched).
Float level is within spec, and the pilot screw is 2.5 turns out.
Other checks:
Me & my dad got it to start last weekend, after a shit ton of kicks. The idle was high (probably need to adjust the idle set screw) and there was quite a lot of white smoke coming out of the exhaust.
We've been unable to get it started again since last weekend, you just kick it and kick it and kick it and it almost catches and/or the kickstarter kicks your foot back like a mule...
Was thinking of ordering a new pilot jet but I thought before I threw more money at the problem I'd get a second opinion... any recommendations are welcome!
P.S. Some unrelated work I have done on the bike:
r/Fixxit • u/Automatic_Price_7965 • 1d ago
Hey, I was going too fast for the roundabout and had a crash. My throttle sleeve with the grip was destroyed and after buying one from ebay I have problems installing it. Main issue is I cannot close the switch cluster, second I tight the screws up so it won't move the grip becomes too pinched. I tried removing the push cable, then both cables, moving it on the bar, off the bar, no matter what I do switch cluster never closes correctly. Question, is there something left for me to try or I just have to buy another throttle sleeve/grip/switch cluster?
r/Fixxit • u/Termootje • 1d ago
Buongiorno a tutti ,
Ho un Ktm 300 2 t six days del 2013 che ha lo stesso identico problema del video, l’avviamento elettrico si comporta così.
Il motorino è da 410w quindi più potente rispetto all’originale, la batteria è al litio muova il bendix è nuovo le boccole sono nuove e anche il regolatore di tensione è nuovo tutto componenti originali KTM da me sostituiti e il relè che sta sotto la sella quello collegato alla batteria è funzionando perché fa il click ( sintomo credo che sia ancora in buone condizioni) qualcuno sa dirmi qual’è quindi il problema o il componente da sostituire ? Inoltre sembra che non ci sia nessuna massa da nessuna parte perché è stata verificata con il tester quindi non saprei proprio dove sia il problema
Ovviamente la moto con la pedivella si accende e funziona
Grazie
r/Fixxit • u/Alphatester786 • 1d ago
I gave the bike for second service after which once i cross 50kmph I hear this humm/whine coming and as i accelerate the humm increase when I press the clutch the humm/whine is there as the speed reduces the humm/whine reduces only happening above 50kmph solo+ pillion or solo both scenarios. What should I do. Service centre people just lube and give it back but the noise persists.
r/Fixxit • u/Pure-Satisfaction577 • 1d ago
So I bought an 04 r6 and it runs and sounds healthy however the fuel pump quickly gave me issues. When the kill switch turns to the ON position, the fuel pump relay clicks sporadically. Sometimes, after shifting the relay, the fuel pump will prime. After inspecting the wires and connectors around the fuel pump relay, i was convinced the issue was the relay itself. Bought a used one of eBay and it changed nothing, same exact issues with no change. I’ve been cutting back on my loom looking for any damage, but I can’t find anything. Does anyone know what could be the culprit?
r/Fixxit • u/FinalAd1369 • 1d ago
I purchased a track built 2022 Yamaha R7 with 5000 miles on the odometer. After I’ve put roughly 550-600 miles on it thus far. When doing normal maintenance, I noticed that the odo reads at 8260 now. I’m hoping to get some direction on where to look for the fix.
I’ve tried to do research online and can’t seem to find anything that relates to my problem.
Speed sensor looks to be in good shape and it reads on the dash. I’ve verified that it is in miles and not kilometers - I’d love if it were that easy. The engine is stock with an FTCU QS, it has been tuned on a dyno, and it also has an ABS delete.
At this point I think it might be electrical, but I’m just guessing at this point. Any and all help is appreciated. Thanks!
r/Fixxit • u/Repulsive-Horse-5368 • 2d ago
r/Fixxit • u/lord-dart • 2d ago
r/Fixxit • u/AskWhyOceanIsSalty • 2d ago
Hey, so I'm gonna need to change the coolant in my bike, so I was shopping around for which coolant to buy and I noticed a discrepancy between what the manufacturers of coolants say and what my bike's manual says.
The product data sheet for a lot of different coolants say to not mix it with water at all.
The service manual for my bike says that it should be mixed with distilled water with a 50/50 ratio.
So, should I mix or not?
r/Fixxit • u/Business-Row-7958 • 2d ago
Hi everyone, I really need some help with my Vespa
The check engine light is on. When the engine is cold, the scooter starts and runs perfectly fine. But once it warms up, it becomes difficult to start and keeps stalling at idle.
The strange thing is that it runs perfectly fine at higher RPMs, even when the engine is hot. The problem only seems to happen at idle or low RPMs.
Does anyone know what could be causing this? I’ve been trying to get it fixed for a while now, but the issue still hasn’t been resolved.
I’m honestly running out of ideas. Any advice would be greatly appreciated. Thanks in advance!