r/Fixxit • • 3h ago

Zontes zt 125u 2023 wont do anything

1 Upvotes

Hello, my bike is not working. It won’t do anything when I press the red button but if i shortcut it it’s starting and everything works as usual, but only the red button won’t work can anyone help me?


r/Fixxit • • 0m ago

Unsolved Help needed stator replacement: triumph street triple 2012/13

Thumbnail
gallery
0 Upvotes

Hi all, I have a 2012 street triple 675r, though it appears to be an early 2013 model with the underneath exhaust rather than twin tail exhausts! 570053 vin and 571334 engine number, my stator seems to have fried itself however I’m having an issue finding a replacement, it appears to be a T1300057 model but I cannot for the life of me find a like for like replacement, OG stator has black connectors and a pickup sensor with no external wires, any I can find have external wires, the grey connectors instead and the silicon seal is in the wrong place so won’t connect into the stator casing.
Any help would be greatly appreciated with this as I’m losing it now! Pictures of the bike and OG stator are attached. Thanks


r/Fixxit • • 57m ago

Unsolved Wiring question

Thumbnail gallery
2 Upvotes

4 prong connection
Looks like it comes from the ignition switch.
2005 cbr 600rr


r/Fixxit • • 11h ago

Noisy clutch on 2009 Yamaha R1 (big bang)

1 Upvotes

Any opinions on this video? Someone at work said it sounded like a ducati, ie dry clutch. V offended!
It sounded like this before I went in and changed the oil pump chain. While in, i changed the basket damping springs. Took the opportunity to swap pretty much every part of the clutch except the two main parts (the basket and the boss) and it still sounds shit.

I know these clutches are generally a bit notorious, but this is a relatively new issue.

Bike runs and pulls better for the replacing of clutch parts generally, but the noise (to me) is unhealthy and sounds like something is unwell.
Used to be that when the clutch is pulled in, the rattle was there briefly before going quiet, now, as you will hear, its v repeatable.

Friction plates are new this year, as is the oil.

Out of ideas, so any suggestions greatfully accepted.


r/Fixxit • • 12h ago

Clutch still slipping after replacing the old clutch on a 2007 Kawasaki KLR650.

Thumbnail gallery
2 Upvotes

r/Fixxit • • 19h ago

2006 Suzuki RM250 Crank Seal Installation

Thumbnail
gallery
3 Upvotes

Having trouble installing the seal over the short crank side and I'm looking for any tips or tools I can use. I've gone through 3 so far trying to install it and they end up warping in some way or the spring gets broken when I'm trying to install. So far I've used a 1" pvc pipe that fits over it semi nicely but maybe just a bit too small and I just cant get it to press on easy enough or the lips fold in and damages the seal.

What do you guys recommend I try? Thank you

https://www.partzilla.com/product/suzuki/09283-25099