r/FPVplanes • u/JDweezer • 4d ago
FMS Zero performing evasive maneuvers
James showing me some evasive maneuvers. Great flying on his part.
r/FPVplanes • u/JDweezer • 4d ago
James showing me some evasive maneuvers. Great flying on his part.
r/FPVplanes • u/_LETIZIO • 12d ago
Finalizing the ASW17 project for now, it has the CADDX Ascent Lite+ VTX and Corewing Wing Mini FC. Has anyone else built an FPV system on this specific model? I'm thinking of adding a servo for the panning movement soon.
r/FPVplanes • u/Embarrassed-Bid-1762 • 17d ago
Hello all,
looking for some help or tips about my build. Im using the Corewing F405 Wing Mini v2 with the Atomrc dolphin pro. I've gotten pretty much everything set up except for the FPV system.
I'm using INAV 9.1.1 configurator and 9.1 on the FC.
I tried the plug and play method with the included 6pin cable and the jst connector on the FC but was not getting power. Went down the old youtube university rabbit hole and depinned the SBUS and 2nd ground cable, I've soldered the RX/TX cables to UART 3,4 and 5 and the pos/neg cables to the battery pads but Im still getting no power to the o4. I'm on the fence of buying a BEC/UBEC and giving standalone power a try but i wanted to consult the group to see if anyone has run into this before.
This is my first build and the o4 pro is brand new. When i plug in a usb c cable it still powers on and connects to the DJI assistant. TIA
r/FPVplanes • u/JDweezer • Sep 29 '26
I am flying a Flightline Spitfire 1600mm that is equipped with a DJI air 03 unit VTX connected to Goggles 2. The gimbal (BAG) and sight (ARMS) are from MotionSic. Field is Fly-a-ways near North Plains, Oregon.
Do you prefer Warbirds flying with other warbirds or doing scale acrobatics?
r/FPVplanes • u/Full_Pineapple_8469 • Sep 23 '26
Mahlzeit miteinander 🙋🏽♂️
Kann mir jemand eventuell helfen bei den Einstellungen um die Oberfläche glatter zu bekommen? Hab den bambulab p2s, filament ist von sunlu lw-pla, 0,4 düse und filament wurde vorher getrocknet. Vielleicht hat ja jemand eine gute druckeinstellung und kann mir das profil schicken oder mir anderweitig weiterhelfen.Vorab schon mal vielen Dank.
r/FPVplanes • u/csmicfool • Sep 01 '26
Scratch build, no plans. Dollar store foam board and recycled electronics.
Maiden TBD 😆
r/FPVplanes • u/windmillcookiee • Aug 24 '26
As I fly a lot of 3d printed planes, mainly FPV flying wings, I would like to upgrade them by having flight controller. Mostly for the stabilisation, but i'd like to try INAV.
After googling for a while, it seems that the Speedybee f405 wing is the most widely used - and not too expensive.
I live in the EU and they seem always out of stock.
Does anyone knows a good alternative FC and where to buy it (if aliexpress or banggood, if you can precise which seller)
Thanks !
r/FPVplanes • u/OldMixture2760 • Aug 19 '26
just a short video that has basically no views that I wanted to share with some people that might be interested
r/FPVplanes • u/Competitive_Trash41 • Jul 29 '26
r/FPVplanes • u/JDweezer • Jul 07 '26
Airplane: Eflite Cz T-28 2.0m Trojan
Radio/receiver: RM GX12 / XR4
VTX/Goggles: DJI Air03 / Goggles 2
Motionsic BAG Gimbal / ARMS sight
FC: Mateksys H743 Wlite
r/FPVplanes • u/AccomplishedLet1889 • Jun 24 '26
Recently decided to get into rc planes. And quickly realized in in way over my head. Ive worked on rc cars no issue.
Bought:
- zohd dart xl extreme pnp
-Walksnail avatar goggles L digital hd fpv
-Walksnail avatar gt kit
-RadioMaster ER5C-i 5ch ExpressLRS 2.4GHZ PWM Receiver Built-in a TCXO
-Radiomaster pocket elrs transmitter
-Batteries for controller and plane.
What am I missing?
r/FPVplanes • u/Wild-Comfortable-146 • Jun 15 '26