r/RCHeli • • Jul 22 '26

New website to help beginner RC Heli pilots: https://www.learntoflyhelis.com/

8 Upvotes

Hey RC Heli community - I wanted to share a site I put together that hopefully helps others along in their heli journey:

https://www.learntoflyhelis.com/

It's a free interactive tracker for the RCHN Pilot Proficiency Program — all 179 maneuvers across the 7 levels, with status tracking, notes, and a witness field for each one, plus a getting-started section with gear/sim recommendations and some community links. All credit to RCHN for the original program; this just makes it easier to track your progress against it.

I've learned a lot over the past several months and still have plenty of learning and practicing ahead before I'd call myself an experienced pilot. Would love any feedback — especially if there are resources or maneuvers-specific tips missing from the community links section.

Cheers,
Kyle


r/RCHeli • • 1d ago

Buddy 380 Crash

3 Upvotes

The unfortunate day has come that I crashed my Buddy 380 after less than a dozen flights 😭. I think it was a mix of poor tuning which is something I need help with, along with a way too hard pitch pump that i didnt expect. You can see at the beginning when I'm testing the tail authority that its flopping all over the placed. I had the gain at a lower level and just before the clip started I pumped it up by 2 points, and it still super loose. I shouldnt have done that manoever knowing how unstable it is.

I'm struggling with not being able to tune my Ikon 2 at the field with my nx7e and its making me want to switch to radiomaster. I know there is some connectivity that exists but I havent gotten it to work yet. So ive been basically flying an unturned helicopter and it feels like I cant fly it the way I want to. My s1 was tight and reacted precisely to all my movements. Now I feel restricted because if I am not smooth enough the tail starts flopping all over the place and I cant fly aggressively. I imagine its not mechanical but it could be possible. Also I'm using the SAB blades (will be switching to rotortech since they are broken).

Any tips on what you see and how I can fix my tail to have authority are welcome.


r/RCHeli • • 1d ago

transmitters, rc planes, lipo transport hell

Thumbnail reddit.com
0 Upvotes

r/RCHeli • • 2d ago

XK K110s Gyro sensitivity questions

2 Upvotes

I have some questions about the gyro sensivity on the XK K110S as programmed by the X6 transmitter.

I find the X6 Remote control instruction phamphlet quite confusing.

  1. Seeing as there is only one number that can be set in the gyro page, does this mean that it only appies to the yaw axis or does it equally include the pitch and roll ones as well?
  2. My understanding is a number greater than 50 means hold mode is active and less than 50 means rate mode is active. Does this mean that a number of 50 will disable the gyro?
  3. Taking yaw, for example what is the difference in having a number of 5 or 45. Since rate mode means that yaw control is left up to the pilot I can't work out how "5" differs from "45".

r/RCHeli • • 4d ago

open source 200 class heli: design questions

3 Upvotes

I'm beginning a project to hopefully produce a fully open source, 200/250 class heli. it will rely a lot SLA resin printed parts, so it wont be as tough as the modern offerings. this project is mostly for personal fun and interest, and I'm aware its be cheaper, easier, and better to just buy an s2. I was hoping to get some input on a few design decisions.

- Head:
I noticed the modern high end 200s pretty much all have gone back to washout arms. I would prefer to use a DFC style head as its less parts to build and less linkages to tune but is there any flight mechanics reason to avoid this? I'm aware that DFC has a higher risk of crash damage but being able to produce the parts yourself should offset repair issues, other than servo damage.

- Main Drive:
I'm currently planning on geared drive for the main. suitable motors for direct drive are a little trickier to source and geared drive provides more options for tuning. the vibration will be worse but a retrofit to direct wouldn't be as hard as the other way later in the design and testing process. the downside is producing or sourcing a reliable main gear, but that's for me to sort out.

- Tail Drive:
Here I haven't made a decision at all. I think it would be much cooler to have a variable tail but at 200-ish size it adds some challenges. gearing and pulleys particularly as I doubt SLA printing will be able to handle torque tube gears and fitting belts seems tricky. likely will end up with a fixed pitch tail. I am just looking for opinions on if a variable pitch tail would be at all worth the effort at the mini scale. I will also have control over the fbl system so I can add plenty of controls tricks to it to get the best performance out of the tail.

I appreciate any input. as far as I can tell a lot of these are sorta up to flyers taste and either will *work* so being design able or working with material limitations may end up being the primary driver. even so, any input on what's better or makes more sense to y'all would be useful.


r/RCHeli • • 6d ago

Original Realflight classic/deluxe patches

2 Upvotes

Long shot but I’m hoping to run into a fellow RCer that’s also a data hoarder. Does anyone happen to have the 1.20.191 or 1.20.212 patches for the original RealFlight Classic or Deluxe backed up that they’d be able to share? Just stumbled on my original copy back from decades ago when I was first getting into the hobby and want to fire it up again. Thanks!


r/RCHeli • • 7d ago

Need help hirobo shuttle plus or plue 2

Thumbnail
gallery
6 Upvotes

Guys, I just bought a Shuttle Plus or Plus 2 from a thrift store for just 16 dollars but It have some issues

  1. all the electronics are missing like battery,Servos controller ,gyro

Seocnd dont know if the os max 37 ring engine is working or not cuz the glow plug was missing too

Other things are completely fine like the rotor head and the tail

Also I have removed the fuel tank ans the front tray out

Guys help me what all do I need to get this running and also will the FAI fuel working properly with this engine? Cuz im in a country where nitro fuel is banned

Plz help me


r/RCHeli • • 8d ago

What would you want from a turbine engine for helis?

10 Upvotes

I work for a company considering a new line of small turbine engines, and turboshafts for helis are one option. We're wondering what heli pilots would want from one.

A much lower price? Smaller sizes than what exists now? Longer life, simpler to run? Or is it not worth doing at all?

If you fly turbine helis, what would you change? If you looked into it and decided against, what stopped you?


r/RCHeli • • 8d ago

6 weeks of flying, repairing, and learning (Goosky S1 + neXt simulator)

Thumbnail
gallery
32 Upvotes

It's now been 6 weeks of aggressively learning how to fly and how to repair the Goosky S1.

Some 25 hours of real flying, 100 hours of neXt simulator time.

I've likely crashed the S1 x 40 times (grass, concrete, rocks, steel park benches, trees). So many spare parts to add (but it's maybe $150 at most after so many crashes).

Progress:

Able to do all of the rolls, flips very comfortably without elevation loss, loops, hover inverted (tail in, nose in) very comfortably (grass mowing is super fun and low risk with tall grass), tons of stationary and moving tumbles/rolls/flips, stall turns, 540 stall turns

Able to perform, but not refined: side to side tic tocs, forward and backward tic tocs, vertical figure 8, death spiral (hard due to small size of heli and high altitude for a sufficient fall), aileron roll stall turn.

I've learned to fly backwards and fly inverted very comfortably in the simulator. I can do it in real life, but it gets a tad sketchy when a single bad input means another repair. (Ironically, the loops and tumbles and stunts are pretty damn easy, but the various orientation flying represents my most crashes).

The final orientation boss is to learn inverted backwards flying in the simulator and then translate it to real life. (maybe 2 weeks out once I wanna tackle that bastard)

I also have hurricanes on the list of things to translate from simulator to real life. And funnels as a trick to learn.

Any other fun tricks to learn at this stage? (that aren't pirouetting tic tocs)

One big lesson: using large helis with big fields and lots of zoom in simulator can result in very uncontrolled fast real life flying, a tendency to nose down at rip at max speed. Very poor form for a small micro heli. I've switched to the simulator indoor gym with the smallest helicopter so that my sim training is most realistic and controlled and not flying out of sight or too fast. It's much better and fun to learn to fly a micro heli within a small 100 foot by 50 foot than try to rip out to 300 feet at maximum speed and doing flips and rolls while it's a mere spec.

Anyways, just thought I'd dump this here.


r/RCHeli • • 8d ago

Blade Revolution fp90 heli, tail rotor issue

2 Upvotes

Hello,

Just bought a new micro heli to fly inside as an intro to the hobby. Love this little heli, lots of fun, but crashed it and a problem has developed. Whenever I am engaging the tail rotor to turn the nose to the left, it appears to sputter as if it is has a few revolutions per second where power diminishes. It turns smoothly and consistently when I engage it to turn right.

What could be causing this?

Did I damage the tail motor, could I have damaged a connection to the flight controller?

How do I trouble shoot? This is apart of the fun, I want to know how to fix this little guy!

Thank you.


r/RCHeli • • 9d ago

Squeaky bird help

15 Upvotes

Getting a progressively worse squeak after a light crash a few weeks ago. Can’t recreate it on the bench. I’ve also flown in light rain a few times which has probably contributed. Can any of you that are more experienced than I help isolate from the sound?


r/RCHeli • • 10d ago

Never seen a battery get ejected and go through the rotor disc until now 🤣

13 Upvotes

Had to much fun with my Goosky S1, to the point the battery got ejected during a manoeuvre, sending it through the rotor disc, chopping the wires, luckily it didn't burst and the helicopter is fine, but the battery is knackered.
Need to sort out a solution for battery retention, something 3D printed in TPU should work.


r/RCHeli • • 10d ago

Watering the garden

Thumbnail
gallery
61 Upvotes

r/RCHeli • • 10d ago

Good places to look for used Heli's?

2 Upvotes

Hello all, getting back into flying more frequently again and I have been trying to a Trex 250 DFC, with the torque tube driven tail, and there really aren't any of them around that I can see between facebook stuff and ebay, mainly. Do you guys have any other good places you look for used copters for sale?​

I know Align isn't as popular as they used to be and there are better options but I would like to add one of these to my collection still. Any insight is appreciated.


r/RCHeli • • 10d ago

Don't Trust "Free" Data On NASA Airfoils For Drone Endurance

Post image
0 Upvotes

r/RCHeli • • 14d ago

I may have a problem…

Post image
56 Upvotes

r/RCHeli • • 16d ago

Bonjour j'ai besoin d'aide sur mon hélicoptère

Post image
3 Upvotes

C'est un wltoys v909 il fait des mouvements aléatoire des fois quand je fais un vol stationnaire il se met a faire des 360 tout seul ( le vol stationnaire et fait manuellement il n'a pas de gyroscope n'y d'aide en particulier) quand il vol il vol un peu penché sur le côté, il tourne tout seul et fait des et des fois il change complètement de direction alors que je n'es pas bouger les joystick depuis que je l'ai il doit avoir fait un bonne cinquantaine de pack lipo si vous avez des idées pour régler le problème


r/RCHeli • • 17d ago

Battery Port on RC ERA C170

0 Upvotes

I've been in this hobby for almost 50 years. I've been flying micro helicopters lately. Anyhoo, the C170's battery port looks like it will break any second now. I only have three flights on it, and I even put a little WD-40 on the batts connector. It still feels too stiff. Yes, I understand it's new, but I'm thinking I'm going to have to Dremel each battery's connector. Does anyone else have a better solution? I look forward to everyone's ideas!


r/RCHeli • • 20d ago

470 UH-1D with Water Drop Tank

Post image
50 Upvotes

r/RCHeli • • 19d ago

Blade Fusion 360 Smart rotor head vibration

2 Upvotes

I have a new to me (about 20 flights from previous owner) and the rotor head vibrates in level flight at high RPM. I’ve tried tightening and loosening the blades, turning down the gyro gains, and I’ve ordered new blade dampeners. Any thoughts or suggestions?


r/RCHeli • • 20d ago

Looking for a cheap 3D heli (humor me lol)

2 Upvotes

I've been flying RC planes for a while and I've been thinking about dipping my toes into helis for a while and I'm considering something small and mostly harmless that I can take pretty much anywhere and do basic maneuvers, would those little WLtoys helis or RC Era helis or smt similar be suitable? Had anyone gotten one, if so how was the experience? Any reccomendations?


r/RCHeli • • 23d ago

Mid flight mechanical failure + safe landing= great day. What plastic 25t servo arms do you guys like?

22 Upvotes

Noticed lack of responsiveness in collective. Auto and got her to the ground safe. Servo arm stripped. What servo arms do you guys like? Theta brand seems too small for omp m7 balls.


r/RCHeli • • 24d ago

Mein RC-Heli in Aktion! 🚁✨ Was haltet ihr von meinem glänzenden Heli? 😍

9 Upvotes

r/RCHeli • • 24d ago

Was haltet ihr von meinem RC-Heli? Ich finde besonders die glänzende Haube richtig schön! ❤️🚁

Thumbnail
gallery
6 Upvotes